Pyridine hydrolysis

To make rosoxacin two heterocyclic systems must be constructed. Workers at the pharmaceutical company Sterling decided to build the pyridine in an ingenious version of the Hantzsch synthesis using acetylenic esters on 3-nitrobenzaldehyde. The ammonia was added as ammonium acetate. Oxidation with nitric acid made the pyridine, hydrolysis of the esters and decarboxylation removed the acid groups, and reduction with Fe(TT) and HC1 converted the nitro group into the amino group required for the quinolone synthesis. 

A reexamination of this plant established the presence of no less than 10 alkaloids and of these the structures of three were determined. Details of the isolation were not recorded but the data leading to the structures are largely documented. The three alkaloids are spirodane-A, C20N25O2N (mp 281° methiodide, mp 330°) spirodane-B, C20H27O2N (mp 259°) and spirodane-C, C22H29O3N (mp 248°). Spirodane-A upon sodium boro-hydride reduction generates spirodane-B, which can be reconverted to the former by means of chromic anhydride in pyridine. Hydrolysis of... 

Other catalytic applications of HBF4 include alkene isomerizations, alkylation of alcohols with diazoalkanes, preparations of substituted pyridines, hydrolysis of a-hydroxyketene or a-(methylthio)ketene thioacetals to a,p-unsaturated thioesters, and terpene formation from isoprenic precursors. ... 

Note that p-acetamidobenzenesulphonyl chloride will similarly react with primary and secondary amines, and the products, after hydrolysis of the acetyl group, may furnish notable drugs e.g., the condensation products with 2-amino-pyridine and 2-aminothiazole, after remo al of the acetyl groups, provide the drugs commonly known as sulphapyridine (M B 693) and sulphathidzole respectively. 

Use of an excess of the halogenating agent results in halogenation at the 3-position of the oxindole[3,4]. The halogenation and hydrolysis can be carried out as two separate steps. One optimized procedure of this type used NCS as the halogenating agent and it was found that 70% phosphoric acid in 2-mcthoxycthanol was the most effective medium for hydrolysis[2]. If the halogenation is carried out in pyridine, the intermediate is trapped as an... 

The acetylation reaction, [1], is carried out in pyridine to avoid the hydrolysis of acetic anhydride by water. After the acetylation is complete, water is added to convert the remaining acetic anhydride to acetic acid, [2]. 

Bromoacetic acid can be prepared by the bromination of acetic acid in the presence of acetic anhydride and a trace of pyridine (55), by the HeU-VoUiard-Zelinsky bromination cataly2ed by phosphoms, and by direct bromination of acetic acid at high temperatures or with hydrogen chloride as catalyst. Other methods of preparation include treatment of chloroacetic acid with hydrobromic acid at elevated temperatures (56), oxidation of ethylene bromide with Aiming nitric acid, hydrolysis of dibromovinyl ether, and air oxidation of bromoacetylene in ethanol. 

Displacement reactions with oxygen nucleophiles are of potential commercial interest. Alkaline hydrolysis provides 2-fluoro-6-hydroxypyridine [55758-32-2], a precursor to 6-fluoropyridyl phosphoms ester insecticides (410—412). Other oxygen nucleophiles such as bisphenol A and hydroquinone have been used to form aryl—pyridine copolymers (413). 

Acid-cataly2ed hydroxylation of naphthalene with 90% hydrogen peroxide gives either 1-naphthol or 2-naphthiol at a 98% yield, depending on the acidity of the system and the solvent used. In anhydrous hydrogen fluoride or 70% HF—30% pyridine solution at — 10 to + 20°C, 1-naphthol is the product formed in > 98% selectivity. In contrast, 2-naphthol is obtained in hydroxylation in super acid (HF—BF, HF—SbF, HF—TaF, FSO H—SbF ) solution at — 60 to — 78°C in > 98% selectivity (57). Of the three commercial methods of manufacture, the pressure hydrolysis of 1-naphthaleneamine with aqueous sulfuric acid at 180°C has been abandoned, at least in the United States. The caustic fusion of sodium 1-naphthalenesulfonate with 50 wt % aqueous sodium hydroxide at ca 290°C followed by the neutralization gives 1-naphthalenol in a ca 90% yield. 

These precursors are prepared by reaction of fuming nitric acid in excess acetic anhydride at low temperatures with 2-furancarboxaldehyde [98-01-1] (furfural) or its diacetate (16) followed by treatment of an intermediate 2-acetoxy-2,5-dihydrofuran [63848-92-0] with pyridine (17). This process has been improved by the use of concentrated nitric acid (18,19), as well as catalytic amounts of phosphoms pentoxide, trichloride, and oxychloride (20), and sulfuric acid (21). Orthophosphoric acid, -toluenesulfonic acid, arsenic acid, boric acid, and stibonic acid, among others are useful additives for the nitration of furfural with acetyl nitrate. Hydrolysis of 5-nitro-2-furancarboxyaldehyde diacetate [92-55-7] with aqueous mineral acids provides the aldehyde which is suitable for use without additional purification. 

N -Heterocyclic Sulfanilamides. The parent sulfanilamide is manufactured by the reaction of A/-acetylsulfanilyl chloride with excess concentrated aqueous ammonia, and hydrolysis of the product. Most heterocycHc amines are less reactive, and the condensation with the sulfonyl chloride is usually done in anhydrous media in the presence of an acid-binding agent. Use of anhydrous conditions avoids hydrolytic destmction of the sulfonyl chloride. The solvent and acid-binding functions are commonly filled by pyridine, or by mixtures of pyridine and acetone. Tertiary amines, such as triethylamine, may be substituted for pyridine. The majority of A/ -heterocycHc sulfanilamides are made by simple condensation with A/-acetylsulfanilyl chloride and hydrolysis. 

Specifications, Analysis, and Toxicity. Dicyandiamide is identified quaHtatively by paper chromatography and quantitatively by ultraviolet spectrometry of the chromatogram. More commonly, total nitrogen analysis is used as a purity control or the dicyandiamide is converted by hydrolysis to guanylurea, which is determined gravimetrically as the nickel salt (50). Methods based on the precipitation of silver dicyandiamide picrate are sometimes used (51). Dicyandiamide can also be titrated with tetrabutylammonium hydroxide ia pyridine solution. Table 4 gives a typical analysis of a commercial sample. Dicyandiamide is essentially nontoxic. It may, however, cause dermatitis. 

Aminopyrazines and 2-aminoquinoxalines, like their pyridine analogs, react with nitrous acid under aqueous conditions to give the 2(l//)-pyrazinones and 2(l//)-quinoxalinones. 2-Aminoquinoxalines are more readily hydrolyzed than typical heterocyclic amines and 2-amino-3-methylquinoxaline, for example, undergoes hydrolysis on heating at 100 °C with dilute sodium hydroxide (59JCS1132). 

Purine, 9- -D-ribofuranosyl-6-selenoxo- 1,6-dihydro-synthesis, 5, 597 Purine, 6-thiocyanato-acylation, 5, 559 Purine, 2-thioxo-synthesis, 5, 589 Purine, 8-thioxo-iodination, 5, 559 synthesis, 5, 577, 597 Purine, 2-thioxo-2,3-dihydro-synthesis, 5, 572 Purine, 6-thioxo-1,6-dihydro-acylation, 5, 559 dethiation, 5, 558 halogenation, 5, 559 hydrolysis, 5, 560 methylation, 5, 535 oxidation, 5, 560 synthesis, 5, 572, 596 Purine, 8-thioxo-7,8-dihydro-acylation, 5, 559 Purine, 2,6,8-trichloro-alkylation, 5, 530 amination, 5, 562 reactions, 5, 561, 562 with hydriodic acid, 5, 563 with pyridine, 5, 562 synthesis, 5, 598 Purine, 2,6,8-trichloro-7-methyl-synthesis, 5, 557 Purine, 8-trifluoromethyl-synthesis, 5, 574... 

The tetrahydropyranyl cyanohydrin was prepared from a steroid cyanohydrin (di-hydropyran, TsOH, reflux, 1.5 h) and cleaved by hydrolysis (cat, coned. HCl, acetone, reflux, 15 min, followed by aq. pyridine, reflux, 1 h)."... 

The 3-pyridylcarboxamide, prepared from the anhydride (Pyr, 99% yield), is cleaved (55-86% yield) by basic hydrolysis (0.5 M NaOH, rt) after quatemization of the pyridine nitrogen with methyl iodide. ... 

Sulfonamides (R2NSO2R ) are prepared from an amine and sulfonyl chloride in the presence of pyridine or aqueous base. The sulfonamide is one of the most stable nitrogen protective groups. Arylsulfonamides are stable to alkaline hydrolysis, and to catalytic reduction they are cleaved by Na/NH3, Na/butanol, sodium naphthalenide, or sodium anthracenide, and by refluxing in acid (48% HBr/cat. phenol). Sulfonamides of less basic amines such as pyrroles and indoles are much easier to cleave than are those of the more basic alkyl amines. In fact, sulfonamides of the less basic amines (pyrroles, indoles, and imidazoles) can be cleaved by basic hydrolysis, which is almost impossible for the alkyl amines. Because of the inherent differences between the aromatic — NH group and simple aliphatic amines, the protection of these compounds (pyrroles, indoles, and imidazoles) will be described in a separate section. One appealing proj>erty of sulfonamides is that the derivatives are more crystalline than amides or carbamates. 

The phenol (Imol) in 5% aqueous NaOH is treated (while cooling) with benzoyl chloride (Imol) and the mixture is stirred in an ice bath until separation of the solid benzoyl derivative is complete. The derivative is filtered off, washed with alkali, then water, and dried (in a vacuum desiccator over NaOH). It is recrystalUsed from ethanol or dilute aqueous ethanol. The benzoylation can also be carried out in dry pyridine at low temperature ca 0°) instead of in NaOH solution, finally pouring the mixture into water and collecting the solid as above. The ester is hydrolysed by refluxing in an alcohol (for example, ethanol, n-butanol) containing two or three equivalents of the alkoxide of the corresponding alcohol (for example sodium ethoxide or sodium n-butoxide) and a few ca 5-10) millilitres of water, for half an hour to three hours. When hydrolysis is complete, an aliquot will remain clear on dilution with four to five times its volume of water. Most of the solvent is distilled off. The residue is diluted with cold water and acidified, and the phenol is steam distilled. The latter is collected from the distillate, dried and either fractionally distilled or recrystalUsed. 

These can be prepared as for the benzoates using either acetic anhydride with 3N NaOH or acetyl chloride in pyridine. They are hydrolysed as described for the benzoates. This hydrolysis can also be carried out with aqueous 10% NaOH solution, completion of hydrolysis being indicated by the complete dissolution of the acetate in the aqueous alkaline solution. On steam distillation, acetic acid also distils off but in these cases the phenols (see above) are invariably solids which can be filtered off and recrystallised. 

---