Propylene molybdate

In 1957 Standard Oil of Ohio (Sohio) discovered bismuth molybdate catalysts capable of producing high yields of acrolein at high propylene conversions (>90%) and at low pressures (12). Over the next 30 years much industrial and academic research and development was devoted to improving these catalysts, which are used in the production processes for acrolein, acryUc acid, and acrylonitrile. AH commercial acrolein manufacturing processes known today are based on propylene oxidation and use bismuth molybdate based catalysts. 

Many key improvements and enhancements to the bismuth molybdate based propylene oxidation catalysts have occurred over the past thirty years. These are outlined in the following tabulation. 

Early catalysts for acrolein synthesis were based on cuprous oxide and other heavy metal oxides deposited on inert siHca or alumina supports (39). Later, catalysts more selective for the oxidation of propylene to acrolein and acrolein to acryHc acid were prepared from bismuth, cobalt, kon, nickel, tin salts, and molybdic, molybdic phosphoric, and molybdic siHcic acids. Preferred second-stage catalysts generally are complex oxides containing molybdenum and vanadium. Other components, such as tungsten, copper, tellurium, and arsenic oxides, have been incorporated to increase low temperature activity and productivity (39,45,46). 

Fig. 2. Mechanism of selective ammoxidation and oxidation of propylene over bismuth molybdate catalysts. (31).

Oxidation Catalysis. The multiple oxidation states available in molybdenum oxide species make these exceUent catalysts in oxidation reactions. The oxidation of methanol (qv) to formaldehyde (qv) is generally carried out commercially on mixed ferric molybdate—molybdenum trioxide catalysts. The oxidation of propylene (qv) to acrolein (77) and the ammoxidation of propylene to acrylonitrile (qv) (78) are each carried out over bismuth—molybdenum oxide catalyst systems. The latter (Sohio) process produces in excess of 3.6 x 10 t/yr of acrylonitrile, which finds use in the production of fibers (qv), elastomers (qv), and water-soluble polymers. 

Catalysts. In industrial practice the composition of catalysts are usuaUy very complex. Tellurium is used in catalysts as a promoter or stmctural component (84). The catalysts are used to promote such diverse reactions as oxidation, ammoxidation, hydrogenation, dehydrogenation, halogenation, dehalogenation, and phenol condensation (85—87). Tellurium is added as a passivation promoter to nickel, iron, and vanadium catalysts. A cerium teUurium molybdate catalyst has successfliUy been used in a commercial operation for the ammoxidation of propylene to acrylonitrile (88). 

The first catalysts used commercially to convert the propylene with high selectivity were mixed oxides of bismuth and molybdenum, referred to as bismuth molybdates. Improved catalysts consisting of a number of soHd phases have been developed, with each generation becoming more compHcated than its predecessor. Among the catalysts cited in a patent is the following Co gNi 2"Fe 3Bi (Mo0 22 Si02 with some P and K (88). Sihca is the... 

These enable temperature control with built-in exchangers between the beds or with pumparound exchangers. Converters for ammonia, 80.3, cumene, and other processes may employ as many as five or six beds in series. The Sohio process for vapor-phase oxidation of propylene to acrylic acid uses hvo beds of bismuth molybdate at 20 to 30 atm (294 to 441 psi) and 290 to 400°C (554 to 752°F). Oxidation of ethylene to ethylene oxide also is done in two stages with supported... 

Much work has been invested to reveal the mechanism by which propylene is catalytically oxidized to acrolein over the heterogeneous catalyst surface. Isotope labeling experiments by Sachtler and DeBoer revealed the presence of an allylic intermediate in the oxidation of propylene to acrolein over bismuth molybdate. In these experiments, propylene was tagged once at Ci, another time at C2 and the third time at C3. 

Another industrially important reaction of propylene, related to the one above, is its partial oxidation in the presence of ammonia, resulting in acrylonitrile, H2C=CHCN. This ammoxidation reaction is also catalyzed by mixed metal oxide catalysts, such as bismuth-molybdate or iron antimonate, to which a large number of promoters is added (Fig. 9.19). Being strongly exothermic, ammoxidation is carried out in a fluidized-bed reactor to enable sufficient heat transfer and temperature control (400-500 °C). 

In the case of selective oxidation catalysis, the use of spectroscopy has provided critical Information about surface and solid state mechanisms. As Is well known( ), some of the most effective catalysts for selective oxidation of olefins are those based on bismuth molybdates. The Industrial significance of these catalysts stems from their unique ability to oxidize propylene and ammonia to acrylonitrile at high selectivity. Several key features of the surface mechanism of this catalytic process have recently been descrlbed(3-A). However, an understanding of the solid state transformations which occur on the catalyst surface or within the catalyst bulk under reaction conditions can only be deduced Indirectly by traditional probe molecule approaches. Direct Insights Into catalyst dynamics require the use of techniques which can probe the solid directly, preferably under reaction conditions. We have, therefore, examined several catalytlcally Important surface and solid state processes of bismuth molybdate based catalysts using multiple spectroscopic techniques Including Raman and Infrared spectroscopies, x-ray and neutron diffraction, and photoelectron spectroscopy. 

Selective oxidation and ammoxldatlon of propylene over bismuth molybdate catalysts occur by a redox mechanism whereby lattice oxygen (or Isoelectronlc NH) Is Inserted Into an allyllc Intermediate, formed via or-H abstraction from the olefin. The resulting anion vacancies are eventually filled by lattice oxygen which originates from gaseous oxygen dlssoclatlvely chemisorbed at surface sites which are spatially and structurally distinct from the sites of olefin oxidation. Mechanistic details about the... 

The structure of the single phase bismuth-iron molybdate compound of composition Bl3FeMo20.2 related to the scheellte structure of Bi2Mo30-2( ). It is reported(, ) that the catalytic activity and selectivity of bismuth-iron molybdate for propylene oxidation and ammoxidatlon is not greater than that of bismuth molybdate. 

Table II. Catalytic Activity for Propylene Ammoxidation Over Bismuth-Iron Molybdate...

The following data given in Tables 16.15, 16.16 and 16.17 on the oxidation of propylene over bismuth molybdate catalyst were obtained at three temperatures, 350,375, and 390°C (Watts, 1994). 

Figure 11.26 Plot of the position sensitivity of the degree of conversion for a set of 48 bismuth-molybdate catalysts (same batch) in propylene to acrolein conversion in a Stage II 48-fold-screening reactor (reaction conditions 2% hydrocarbon in air at GHSV of 3000 h-1, column no. 8 contains only inert carrier material).

The newest and most commercially successful process involves vapor phase oxidation of propylene to AA followed by esterification to the acrylate of your choice. Chemical grade propylene (90—95% purity) is premixed with steam and oxygen and then reacted at 650—700°F and 60—70 psi over a molybdate-cobait or nickel metal oxide catalyst on a silica support to give acrolein (CH2=CH-CHO), an intermediate oxidation product on the way to AA. Other catalysts based on cobalt-molybdenum vanadium oxides are sometimes used for the acrolein oxidation step. 

Three well known examples of processes employing fluidised-bed operations are the oxidations of naphthalene and xylene to phthalic anhydride using a supported V2O5 catalyst and ammoxidation of propylene utilising a mixed oxide composition containing bismuth molybdate. Typically, this latter reaction is executed by passing a mixture of ammonia, air and propylene to a fluidised bed operating at about 0.2 MPa pressure, 400—500°C and a few seconds contact time between gas and fluidised catalyst peirticles. 

Acrolein Production. Adams et al. [/. Catalysis, 3,379 (1964)] studied the catalytic oxidation of propylene on bismuth molybdate catalyst to form acrolein. With a feed of propylene and oxygen and reaction at 460°C, the following three reactions occur. 

Mechanisms There is a derth of knowledge about the mechanisms operative in selective oxidation reactions. The only exceptions are the reactions of ethylene to ethylene oxide on supported silver catalysts and of propylene to acrolein on bismuth molybdate type catalysts. For the latter, it is well established through isotopic labeling experiments that a symmetric allyl radical is an intermediate in the reaction and that its formation is rate-determining. Many studies simply extrapolate the results substantiated for this case to other reactions. New ideas on mechanisms are presented by Oyama, et oL, Parmaliana, et aL, and Laszlo. 

Light hydrocarbons consisting of oxygen or other heteroatoms are important intermediates in the chemical industry. Selective hydrocarbon oxidation of alkenes progressed dramatically with the discovery of bismuth molybdate mixed-metal-oxide catalysts because of their high selectivity and activity (>90%). These now form the basis of very important commercial multicomponent catalysts (which may contain mixed metal oxides) for the oxidation of propylene to acrolein and ammoxidation with ammonia to acrylonitrile and to propylene oxide. 

These results suggest that the (101) superstructure observed on the (001) -phase at the catalyst s operating temperature is closely related to Bi2M02O9. A quantification of the microanalysis of the jS-preparation shows a Bi-deficiency. Similar results are observed in the reaction of the a-phase in propylene. In a C3 H6-O2 mixture under working conditions both phases show the presence of this superstructure similar to the jS-structure. The ETEM results are consistent with XPS and Raman data which show that the surface structure of the active bismuth molybdate is close to the jS-phase and that the jS-phase is more active (Matsurra et al 1980, Burrington et al 1983). In these studies dramatic increases in the activity... 

Ammoxidation of propylene Bismuth molybdates, uranyl antimonate... 

Among the oxide catalysts, bismuth molybdates that catalyse selective oxidation and ammoxidation of propylene to yield acrolein and acrylonitrile have received considerable attention (Grasselli Burrington, 1981) ... 

At lower temperatures the Mars-van Krevelen mechanism no longer applies. Sancier et al. (440) studied propylene oxidation in the presence of 1802 over bismuth molybdate and found that the acrolein product contained 180 and not exclusively leO from the oxide lattice in contrast with results obtained by Keulks and co-workers (441, 442) at higher temperatures. This lower-temperature oxidation must involve adsorbed oxygen in some form but the nature is not clear. It is now accepted that not all these oxidation reactions do involve lattice oxygen (442,443). 

Acrolein and Acrylic Acid. Acrolein and acrylic acid are manufactured by the direct catalytic air oxidation of propylene. In a related process called ammoxida-tion, heterogeneous oxidation of propylene by oxygen in the presence of ammonia yields acrylonitrile (see Section 9.5.3). Similar catalysts based mainly on metal oxides of Mo and Sb are used in all three transformations. A wide array of single-phase systems such as bismuth molybdate or uranyl antimonate and multicomponent catalysts, such as iron oxide-antimony oxide or bismuth oxide-molybdenum oxide with other metal ions (Ce, Co, Ni), may be employed.939 The first commercial process to produce acrolein through the oxidation of propylene, however, was developed by Shell applying cuprous oxide on Si-C catalyst in the presence of I2 promoter. 

Practically complete conversion of propylene and ammonia is achieved to produce acrylonitrile in 65-70% yield. Acetonitrile and HCN are the main byproducts. The Sohio process originally used oxides of Bi, Co, and Mo, and bismuth and cobalt molybdates.898,915,941,953 Other catalysts developed later (uranyl antimonate antimony oxide-iron oxide oxides of Fe, Ce, and Mo mixed oxides of Sb and Sn)898,915,939,953,955,956 produce fewer byproducts and ensure higher yields of acrylonitrile. 

During the history of a half century from the first discovery of the reaction (/) and 35 years after the industrialization (2-4), these catalytic reactions, so-called allylic oxidations of lower olefins (Table I), have been improved year by year. Drastic changes have been introduced to the catalyst composition and preparation as well as to the reaction process. As a result, the total yield of acrylic acid from propylene reaches more than 90% under industrial conditions and the single pass yield of acrylonitrile also exceeds 80% in the commercial plants. The practical catalysts employed in the commercial plants consist of complicated multicomponent metal oxide systems including bismuth molybdate or iron antimonate as the main component. These modern catalyst systems show much higher activity and selectivity... 

Fig. I. Mechanism of selective oxidation of propylene to acrolein over bismuth molybdate catalyst by Burrington et al. (19).

---