Pressure measurement diaphragm gauges

Pressure. Most pressure measurements are based on the concept of translating the process pressure into a physical movement of a diaphragm, bellows, or a Bourdon element. For electronic transmission, these basic elements are coupled with an electronic device for transforming a physical movement associated with the element into an electronic signal proportional to the process pressure, eg, a strain gauge or a linear differential variable transformer (LDVT). 

Strain-gauge pressure transducers are manufactured in many forms for measuring gauge, absolute, and differential pressures and vacuum. Full-scale ranges from 25.4 mm of water to 10,134 MPa are available. Strain gauges bonded direc tly to a diaphragm pressure-sensitive element usually have an extremely fast response time and are suitable for high-frequency dynamic-pressure measurements. 

Conditions of Use Bourdon tubes shoula not be exposed to temperatures over about 65°C (about 150°F) unless the tubes are specifically designed for such operation. When the pressure of a hotter fluid is to be measured, some type of hquid seal should be used to keep the hot fluid from the tube. In using either a Bourdon or a diaphragm gauge to measure gas pressure, if the gauge is below the... 

Those that are based on the measurement of the distortion of an elastic pressure chamber (mechanical pressure gauges such as Bourdon-tube gauges and diaphragm gauges)... 

Methods of measuring underwater shock waves by crusher gauges, diaphragm gauges piezoelectric gauges are thoroughly described by Cole (Ref 3) in Chapter 7. Cook (Ref 7) describes the use of a 16- to 64-frame/sec camera to measure the free surface vel produced by a shock wave at the surface, and the determination of the underwater pressure-distance curve for TNT... 

The measurement of pressure from a few torr to 104 torr in an all-metal system can be accomplished by means of a metal Bourdon or diaphragm gauge with a dial readout. Although a bronze chamber is the most common, these gauges are available with more corrosion-resistant metals, and some are available which are accurate to 0.5 torr.7... 

---