Ppmv

Adsorption (qv) of gases has been reviewed (40,50) (see also Adsorption, gas separation). Adsorption, used alone or in combination with other removal methods, is excellent for removing pollutant gases to extremely low concentrations, eg, 1 ppmv. When used in combination, it is typically the final step. Adsorption, always exothermic, is even more attractive when very large gas volumes must be made almost pollutant free. Because granular adsorbent beds ate difficult to cool because of poor heat transfer, gas precooling is often practiced to minimize adsorption capacity loss toward the end of the bed. Pretreatment to remove or reduce adsorbable molecules, such as water, competing for adsorption sites should also be considered (41). 

Temperature, °C Time to form 500 ppmv NO, s NO equihbrium concentration, ppmv... 

Impurity Commercial, ppmv VLSI, ppmv Megaclass, ppmv... 

Products of Incomplete Combustion Emission Limits. Products of iacomplete combustion typically are not directly measured duting the trial bum. Instead, levels of carbon monoxide (qv) emissions are used as an iadication of combustion efficiency. High combustion efficiencies are assumed to result ia acceptable levels of products of incomplete combustion. If carbon monoxide emissions are measured at less than 100 ppmv dry basis, the standard is met. However, if emissions are greater than 100 ppmv, no more than 20 ppmv of total hydrocarbons (qv) are allowed at the iaciaerator stack duting the trial bum. 

Gas and Hquid dehydrators employing molecular sieves provide product gas streams of <0.1 ppmv water and product Hquid streams routinely to <10 ppmv water. AppHcable pressures range from less than one to several hundred times atmospheric pressure. Temperatures range from subzero to several hundred °C. Processing units range in capacity from as Httle as 10 m /h to as much as 10 mr /d in multiple-train units. 

Environmental Impact of Ambient Ozone. Ozone can be toxic to plants, animals, and fish. The lethal dose, LD q, for albino mice is 3.8 ppmv for a 4-h exposure (156) the 96-h LC q for striped bass, channel catfish, and rainbow trout is 80, 30, and 9.3 ppb, respectively. Small, natural, and anthropogenic atmospheric ozone concentrations can increase the weathering and aging of materials such as plastics, paint, textiles, and mbber. For example, mbber is degraded by reaction of ozone with carbon—carbon double bonds of the mbber polymer, requiring the addition of aromatic amines as ozone scavengers (see Antioxidants Antiozonants). An ozone decomposing polymer (noXon) has been developed that destroys ozone in air or water (157). 

CCI4, 900 ppmv CHCl, 500 ppmv CH2CI2, 800 ppmv and CH Cl, 600 ppmv. 

Example 6 Solvent Rate for Absorption Let us consider the absorption of acetone from air at atmospheric pressure into a stream of pure water fed to the top of a packed absorber at 25 C. The inlet gas at 35 C contains 2 percent by volume of acetone and is 70 percent saturated with water vapor (4 percent H2O by volume). The mole-fraction acetone in the exit gas is to be reduced to 1/400 of the inlet value, or 50 ppmv. For 100 kmol of feed-gas mixture, how many Idlomoles of fresh water should be fed to provide a positive-driving force throughout the pacldug How many transfer units will be needed according to the classical adiabatic method What is the estimated height of pacldug required if Hqq = 0.70 m ... 

MWCs Acid Gas Emissions The NSPS requires a 95 percent reduction of HCl emissions and an 80 percent rediiction of SO9 emissions for new MWCs or an emission limit of 25 ppmv for HCl and 30 ppmv for SO2 (at 7 percent O2 dv). 

Nitrogen Oxides Emissions The NSPS limits NO emissions to 180 ppmv (at 7 percent O2 dv). 

Under normal operating conditions, the concentration of the trioxide is unlikely to exceed 10 ppmv, but this is sufficient to elevate the acid dew point to around 422 K (300°F). This places a limit on the lowest acceptable back-end temperature if acid condensation and resulting corrosion problems are to be avoided. 

The large number of individual hydrocarbons in the atmosphere and the many different hydrocarbon classes make ambient air monitoring a very difficult task. The ambient atmosphere contains an ubiquitous concentration of methane (CH4) at approximately 1.6 ppm worldwide (9). The concentration of all other hydrocarbons in ambient air can range from 100 times less to 10 times greater than the methane concentration for a rural versus an urban location. The terminology of the concentration of hydrocarbon compounds is potentially confusing. Hydrocarbon concentrations are referred to by two units—parts per million by volume (ppmV) and parts per million by carbon (ppmC). Thus, 1 fx of gas in 1 liter of air is 1 ppmV, so the following is true ... 

The U.S. Environmental Protection Agency has established National Ambient Air Quality Standards (NAAQS) for protection of human health and welfare. These standards are defined in terms of concentration and hme span for a specific pollutant for example, the NAAQS for carbon monoxide is 9 ppmV for 8 hr, not to be exceeded more than once per year. For a state or local government to establish compliance with a National Ambient Air Quality Standard, measurements of the actual air quality must be made. To obtain these measurements, state and local governments have established stationary monitoring networks with instrumentation complying with federal specifications, as discussed in Chapter 14. The results of these measurements determine whether a given location is violating the air quality standard. 

---