Pour-coat adhesive

Uses Catalyst for PU coatings, adhesives, and sealants Features Uniform activity and exc. stability FToperties Coloriess to le yel. clear liq. sp.gr. 1.25 dens. 10.5 Ib/gal vise. 310 cps pour pt. < -25 C flash pt. (PM) 142 C 28% total tin Toxicology Eye and skin irritant Metacure T-12 [Air Prods./Perf. Chems.]... [Pg.517]

Chem. Descrip. Blend of mineral oils, org. solids, surfactants Uses Defoamer for latexes (SBR, PVC, B/S, PVAc), paints/coatings, adhesives, water-borne flexographic or gravure inks, paper coatings Properties Off-wh. opaque llq. disp. in water sp.gr. 0.83 dens. 6.93 Ib/gal vise. 400 cps pour pt. 0 C... [Pg.1459]

Uses Chemical intermediate for coatings, adhesives, lubricants, metalworking, paper mfg., petrol, prod., ceramics, printing, electronics, solvs., cleaners, latex paints, mold release agent, rubber, textiles Properties Gardner < 1 liq. sol. in water, xylene disp. in Stod. dens. 9.4 Ib/gai vise. 33 cSt (100 F) pour pt. -10 C flash pt. > 400 F Emery 6752 [Cognis]... [Pg.1481]

There are two possibilities for practical implementation. If the polymers with the heterocyclic groups are to be isolated in powder form, the polycyclocondensation can be achieved in the same reaction mixture, i.e., in solution. However, if the polymer is to be isolated in the form of fibers, foils, coatings, or adhesives, the following procedure is appropriate The soluble, still reactive polymers of the first reaction step are poured out, e.g., as a film, or spun into a fiber. Then the solvent is evaporated and afterwards the polycyclocondensation is carried out by heating the finished article in the solid state. [Pg.313]

Flow or curtain Use a head with a slot in the bottom through which the adhesive is poured or lowered onto the parts or surfaces as they pass beneath the head by a conveyor provides materials savings and ability to coat irregular surfaces uniformly... [Pg.408]

Macromer . [Sartomer] Mediacrylate-terminated polystyrene pour pt dqxes-sant used in inks, coatings, sealants, glass reinforcements, adhesives, graft ccqjolymers. [Pg.220]

Ageflex FM-68 Ageflex FM-1620 A13-25418 EINECS 251-013-5 Methacrylio acid, octadecyi ester Methacrylic acid, stearyl ester Octadecyl methacrylate 2-Propenoic acid, 2-methyl-, octadecyl ester. Natural, C16-I8 methacrylates, with 100 ppm hydroquinone inhibitor lube oil additive, pour point depressant, paper coatings, textile finishes, paints, varnishes, pressure-sensitive adhesives. Lube oil additive, pour point depressant. Used in paper coatings, textile finishes, paints, varnishes, pressure-sensitive adhesives. Liquid bps = 181° d 8 = 0.868 f.p. -20° flash pt. 110°. Rit-Chem Rohm Haas Co. Sartomer. [Pg.451]

Eemarks on the Preparation of Useful Alloys.—In working with antimony alloys it is important to cast them at a temperature as low as possible, and to pour into cold moulds, so as to aid rapid solidification and obtain a fairly uniform noass instead of an eutectic alloy. Brass moulds must be used for casting, and must be coated on the interior with a mixture of lamp-black and oil of turpentine, or lamp-black alone, to prevent any adhesion of the alloy to the mould. Red chalk mixed to a uniform mass with water can also be used. [Pg.153]

In Fig. 3.33, comparative information is presented on the adhesive strength of polymer powder coatings formed on aluminum substrates by the electrostatic method under an external field of 2.5-3 kV/cm (the charge density in the layer was q/m 3 10 C/kg) and thermal treatment of a similar thickness poured layer of uncharged particles [52]. [Pg.219]

Chlorinated Rubber-Acrylic Resin Combinations. Physically drying acrylic resins are used for these combinations. These combinations have the same drying rates as normal chlorinated rubber paints (see Section 2.3.2). They have improved flow properties (particularly when applied by pouring techniques), improved weather resistance (chalking and yellowing), and favorable mechanical properties (adhesion and extensibility). Applications include topcoats for ship superstructures and priming coats on galvanized surfaces. [Pg.22]

Uses Emulsifier for emulsion polymerization of vinyl acetate, acrylates, methacrylates, styrene, butadiene for paints, adhesives, paper, textile, and industrial coatings stabilizer wetting agent, dispersant for agric. formulations food pkg. adhesives, paper Features Provides mech. and freeze/thaw stability Regulatory FDA21CFR 175.105,176.180 BGA XIV compliance Properties Pale yel. liq. sp.gr. 1.06 vise. Ill cks pour pt. 8 C surf. tens. 40 dynes/cm (1%) anionic 30% solids Abex EP-277 [Rhodia HPCII]... [Pg.5]

Uses Monomer for lube oil additives, pour pt. depressants, paper coatings, textile finishes, paints, varnishes, pressure-sensitive adhesives Properties APHA 200 color m.w. 338.58 sp.gr. 0.864 (20/20 C) f.p. 18... [Pg.40]

Chem. Descrip. Tri-n-butyi citrate CAS 77-94-1 EiNECS/ELiNCS 201-071-2 Uses Piasticizer for ceiiuiose nitrate, ethyi ceiiuiose, chiorinated rubber, ceiiuiosic coatings, PVAc, PVB, PVC, PVP, PVdC, poiy(acryiate/meth-acryiate) defoamer in proteinaceous soi ns. improved it. stability in cellulose acetate solvent for household, I I cleaners solvent, film-former, plasticizer in inks, adhesives, coatings food pkg. adhesives Features Environmentally friendly Regulatory FDA 21CFR 175.105 kosher Properties Clear Iiq., essentially odorless sol. in toluene, heptane, < 0.1 g/100 ml water m.w. 360 sp.gr. 1.037-1.045 vise. 32 cps vapor pressure 1 mm Hg (170 C) pour pt. -62 C flash pt. (COC) 185 C ref. index 1.443-1.445 99% assay... [Pg.189]

Uses Defoamer for latex/rubber applies, esp. monomer stripping, acrylic, PVAc, NBR, SBR, PVC, adhesives, coatings, paper mtg. food pkg. adhesives, paper, animal glue, cellophane Regulatory FDA 21 CFR 175.105,176.210,176.200,177.1200,178.3120 Properties Straw-colored opaque liq. emulsitiable in water sp.gr. 0.89 dens. 7.58 Ib/gal vise. 800 cps pour pt. 9 C flash pt. (PMCC) 93 C 100% act. [Pg.282]

Uses Defoamer tor latex/rubber applies. (SBR, PVAc, PVA, NBR, acrylic), esp. for paper coating and carpet backing defoamer in food-contact coatings, paper/paperboard food pkg. adhesives Regulatory FDA 21 CFR 175.105,176.200,176.210 Properties Yel. opaque liq. disp. in water sp.gr. 0.92 vise. 600 cps pour pt. -4 C flash pt. (PMCC) > 93 C Use Level 0.01-0.1% total wt. basis Drewplus L-139 [Ashland/Drew Ind. Div]... [Pg.282]

Chem. Descrip. Blend of silica derivs., hydrocarbons, and silicones Uses Defoamer for inks, adhesives, paints/coatings, aq. interior semigloss, eggshell or aq. exterior semigloss trade sales paints, food-contact adhesives/paper/animal glue/cellophane Regulat FDA 21 CFR 175.105,176.200,176.210,177.1200,178.3120 Properties Off-wh. opaque liq. disp. in water sp.gr. 0.98 dens. 8.18 lb/ gal vise. 1250 cps pour pt. 6 C Use Level 0.1 -0. /o by total wt. [Pg.283]

Chem. Descrip. Cetyl stearyl methacrylate, MEHQ stabilizer Uses Acrylic for mf of polymers used as oil additives, vise, index improvers, and pour pt. depressanis internal plasticizer for adhesives, UV-curable resins, and coatings... [Pg.319]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...