Potentiometric direct

The acid hydrolysis of the 2-aryl-1,3,4-oxadiazoles can be used for their analytical determination. The method used is either to break down the compound by heating with hydrochloric acid under reflux to give the acid hydrazide and then to titrate the hydrazide with iodide in bicarbonate solution,68, 69 or to titrate potentiometrically directly with sodium nitrite in a hydrochloric acid medium.128 In this way the acid hydrazide is formed in the first reaction step and is then converted into the insoluble azide by the sodium nitrite. 

Na+ ISEs in field mapping with potentiometric direct soil measurements (DSM). In these works, samples were taken at different locations and analyzed in the laboratory by the apparatus. Reference measurements also were conducted in commercial soil laboratories by conventional laboratory methods. Three pH electrodes, two K+, two N03, and one Na" " electrodes were selected for the experiments. 

The measurement of pK for bases as weak as thiazoles can be undertaken in two ways by potentiometric titration and by absorption spectrophotometry. In the cases of thiazoles, the second method has been used (140, 148-150). A certain number of anomalies in the results obtained by potentiometry in aqueous medium using Henderson s classical equation directly have led to the development of an indirect method of treatment of the experimental results, while keeping the Henderson equation (144). 

Although not commonly used, thermometric titrations have one distinct advantage over methods based on the direct or indirect monitoring of plT. As discussed earlier, visual indicators and potentiometric titration curves are limited by the magnitude of the relevant equilibrium constants. For example, the titration of boric acid, ITaBOa, for which is 5.8 X 10 °, yields a poorly defined equivalence point (Figure 9.15a). The enthalpy of neutralization for boric acid with NaOlT, however, is only 23% less than that for a strong acid (-42.7 kj/mol... 

Directions are provided in this experiment for determining the dissociation constant for a weak acid. Potentiometric titration data are analyzed by a modified Gran plot. The experiment is carried out at a variety of ionic strengths and the thermodynamic dissociation constant determined by extrapolating to zero ionic strength. 

Directions for preparing a potentiometric biosensor for penicillin are provided in this experiment. The enzyme penicillinase is immobilized in a polyacrylamide polymer formed on the surface of a glass pH electrode. The electrode shows a linear response to penicillin G over a concentration range of 10 M to 10 M. 

The free maleic acid content in maleic anhydride is determined by direct potentiometric titration (166). The procedure involves the use of a tertiary amine, A/-ethylpipetidine [766-09-6J, as a titrant. A tertiary amine is chosen as a titrant since it is nonreactive with anhydrides (166,167). The titration is conducted in an anhydrous solvent system. Only one of the carboxyhc acid groups is titrated by this procedure. The second hydrogen s dissociation constant is too weak to titrate (166). This test method is not only used to determine the latent acid content in refined maleic acid, but also as a measure of the sample exposure to moisture during shipping. 

Ion Selective Electrodes Technique. Ion selective (ISE) methods, based on a direct potentiometric technique (7) (see Electroanalytical techniques), are routinely used in clinical chemistry to measure pH, sodium, potassium, carbon dioxide, calcium, lithium, and chloride levels in biological fluids. 

DIRECT POTENTIOMETRIC DETERMINATION OF SULFATE CONTENT IN BIOLOGICAL FLUIDS (URINE)... 

CrP" -selective and Ni " -selective electrodes have been used to detenuine the copper and nickel ions in aqueous solutions, both by direct potentiometry and by potentiometric titration with EDTA. They have also been used for detenuining the CiT and Ni " ions in indushial waters by direct potentiomehy. 

The study of these electrodes has proved primary and secondary characteristics favorable to their practical utilization in potentiometric titrations and in direct potentiometric determinations. 

Methods of sulfate determination used in common practice suffer from essential disadvantages (time consumption, laboriousness, low sensitivity, etc.). For this reason, creation of sulfate-selective electrode suitable for direct potentiometric determination of this ion, has been attempted for a long time. Nowadays, nearly a dozen of sulfate-selective electrodes based on charged or neutral carriers of different stmcture have been described. Flowever, no known receptors for sulfate ions are available commercially. 

It may happen that AH is not available for the buffer substance used in the kinetic studies moreover the thermodynamic quantity A//° is not precisely the correct quantity to use in Eq. (6-37) because it does not apply to the experimental solvent composition. Then the experimentalist can determine AH. The most direct method is to measure AH calorimetrically however, few laboratories Eire equipped for this measurement. An alternative approach is to measure K, under the kinetic conditions of temperature and solvent this can be done potentiometrically or by potentiometry combined with spectrophotometry. Then, from the slope of the plot of log K a against l/T, AH is calculated. Although this value is not thermodynamically defined (since it is based on the assumption that AH is temperature independent), it will be valid for the present purpose over the temperature range studied. 

Standard potentials are determined with full consideration of activity effects, and are really limiting values. They are rarely, if ever, observed directly in a potentiometric measurement. In practice, measured potentials determined under defined concentration conditions (formal potentials) are very useful for predicting the possibilities of redox processes. Further details are given in Section 10.90. 

A. Direct titration. The solution containing the metal ion to be determined is buffered to the desired pH (e.g. to PH = 10 with NH4-aq. NH3) and titrated directly with the standard EDTA solution. It may be necessary to prevent precipitation of the hydroxide of the metal (or a basic salt) by the addition of some auxiliary complexing agent, such as tartrate or citrate or triethanolamine. At the equivalence point the magnitude of the concentration of the metal ion being determined decreases abruptly. This is generally determined by the change in colour of a metal indicator or by amperometric, spectrophotometric, or potentiometric methods. 

In view of the problems referred to above in connection with direct potentiometry, much attention has been directed to the procedure of potentio-metric titration as an analytical method. As the name implies, it is a titrimetric procedure in which potentiometric measurements are carried out in order to fix the end point. In this procedure we are concerned with changes in electrode potential rather than in an accurate value for the electrode potential with a given solution, and under these circumstances the effect of the liquid junction potential may be ignored. In such a titration, the change in cell e.m.f. occurs most rapidly in the neighbourhood of the end point, and as will be explained later (Section 15.18), various methods can be used to ascertain the point at which the rate of potential change is at a maximum this is at the end point of the titration. 

In the present chapter consideration is given to various types of indicator and reference electrodes, to the procedures and instrumentation for measuring cell e.m.f., to some selected examples of determinations carried out by direct potentiometry, and to some typical examples of potentiometric titrations. 

To measure the e.m.f. the electrode system must be connected to a potentiometer or to an electronic voltmeter if the indicator electrode is a membrane electrode (e.g. a glass electrode), then a simple potentiometer is unsuitable and either a pH meter or a selective-ion meter must be employed the meter readings may give directly the varying pH (or pM) values as titration proceeds, or the meter may be used in the millivoltmeter mode, so that e.m.f. values are recorded. Used as a millivoltmeter, such meters can be used with almost any electrode assembly to record the results of many different types of potentiometric titrations, and in many cases the instruments have provision for connection to a recorder so that a continuous record of the titration results can be obtained, i.e. a titration curve is produced. 

Potentiometric titrations - continued EDTA titrations, 586 neutralisation reactions, 578, 580 non-aqueous titrations, 589, (T) 590 oxidation-reduction reactions, 579, 581, 584 precipitation reactions, 579, 582 Potentiometry 548 direct, 548, 567 fluoride, D. of, 570 Potentiostats 510, 607 Precipitants organic, 437 Precipitate ageing of, 423 digestion of, 423... 

It was found that chlorides, chlorates, and nitrates interfere by forming in sol ppts (Ref 6). Later it was found that w sol perchlorates could be analyzed gravimetrically by pptn of the perchlorate ion as tetraphenylarsonium perchlorate (Ksp at 20° = 2.60 0.14 x 10"9). The ppt can be (Tried at 105° and weighed directly (Ref 16). Still more recently a specific perchlorate ion electrode has been developed (Ref 17) which can be used for the potentiometric titration of the perchlorate ion using a soln of tetraphenylarsonium chloride as the titrant (Ref 15). Tetra-phenylphosphonium chloride has been similarly used, but the corresponding Sb compd is too insol in w for practical use (Ref 8), For routine assay of perchlorates for use by the armed forces, a Na carbonate fusion procedure is described in Mil Specs MlL-A-23946 (19 Aug 1964) MIL-A-23948 (19 Aug 1964) (see also under Ammonium Perchlorate). The tetraphenylarsonium chloride procedure has also been proposed for use in Mil Specs (Ref 11)... 

Potentiometry (discussed in Chapter 5), which is of great practical importance, is a static (zero current) technique in which the information about the sample composition is obtained from measurement of the potential established across a membrane. Different types of membrane materials, possessing different ion-recognition processes, have been developed to impart high selectivity. The resulting potentiometric probes have thus been widely used for several decades for direct monitoring of ionic species such as protons or calcium, fluoride, and potassium ions in complex samples. 

The equipment required for direct potentiometric measurements includes an ion-selective electrode (ISE), a reference electrode, and a potential-measuring device (a pH/millivolt meter that can read 0.2mV or better) (Figure 5-1). Conventional voltmeters cannot be used because only very small currents are allowed to be drawn. The ion-selective electrode is an indicator electrode capable of selectively measuring the activity of a particular ionic species. Such electrodes exhibit a fast response and a wide linear range, are not affected by color or turbidity, are not... 

---