Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Porphyrin in oxidations

The results of the catalytic activity of meso-para-carboxylphenyl and meso-o/f/w-nitro-phenyl derivatives of iron(III) porphyrins in oxidation of d.v-cyclooctcnc, cyclohexene and cyclohexane with iodosylbenzene. The source compounds were dissolved in dichloroethane or dichloroethane mixture with methanol ... [Pg.279]

Rayati S, Jafarzadeh P, Zakavi S. Catalytic activity of carbon nanotube supported iron(lll) and manganese(III) porphyrins in oxidation of olefins with tert-butyl hydroperoxide higher activity of the iron(III) porphyrin. Inorg Chem Commun 2013 29 40. ... [Pg.511]

N—Fe(IV)Por complexes. Oxo iron(IV) porphyrin cation radical complexes, [O—Fe(IV)Por ], are important intermediates in oxygen atom transfer reactions. Compound I of the enzymes catalase and peroxidase have this formulation, as does the active intermediate in the catalytic cycle of cytochrome P Q. Similar intermediates are invoked in the extensively investigated hydroxylations and epoxidations of hydrocarbon substrates cataly2ed by iron porphyrins in the presence of such oxidizing agents as iodosylbenzene, NaOCl, peroxides, and air. [Pg.442]

The abihty of iron to exist in two stable oxidation states, ie, the ferrous, Fe ", and ferric, Fe ", states in aqueous solutions, is important to the role of iron as a biocatalyst (79) (see Iron compounds). Although the cytochromes of the electron-transport chain contain porphyrins like hemoglobin and myoglobin, the iron ions therein are involved in oxidation—reduction reactions (78). Catalase is a tetramer containing four atoms of iron peroxidase is a monomer having one atom of iron. The iron in these enzymes also undergoes oxidation and reduction (80). [Pg.384]

The 7/NMR spectrum displays signals of shielded protons = - 2.35, integral level 1) and of deshielded ones = 10.45 and 9.39, integral levels 1 1). This reflects a ring current due to aromaticity as described for annulenes and porphyrins in section 2.5.2. To conclude, the reaction involves an oxidative cyclisatlon of 2,5-bis(2-pyrrolylmethyl)-17/-pyrrole 2 with 47/-trlazole-3,5-dlaldehyde 3 to the corresponding 2,3-diazaporphyrin 4, following the 3-t-l pathway of porphyrin synthesis. Two non-equivalent tautomers may exist these are the diaza[ 18]annulene 4a and the tetraaza[18]annulene 4b. [Pg.213]

Similiar problems of regioselectivity as in reduction reactions are encountered in oxidation reactions of porphyrins and chlorins. The oxidation of chlorins to isobacteriochlorins can be directed by insertion of zinc(II) or nickel(II) into the macrocycle. Again here, the metal-free chlorins give the bacteriochlorins whereas the metal chlorins, e.g. 1, give isobacteriochlorins, e.g. 3.15a,b I 7... [Pg.647]

The olive-green osmium(VI) octaethylporphyrin complex 0s02(0EP) (IR v(0s—0) 825 cm-1) is representative of a number of osmyP porphyrins [185] they can readily be transformed into a number of osmium porphyrins in lower oxidation states (Figure 1.73). [Pg.71]

Over the last decade a number of high oxidation state ruthenium porphyrin complexes containing 0x0 or imido ligands have been reported and have been thoroughly studied for their role in oxidation and atom-transfer chemistry. Although comparisons can be drawn with organometallic species (carbene, imido. and 0x0 ligands are formally isolobal) the chemistry of the 0x0 and imido complexes is beyond the scope of the review and will not be covered here. [Pg.265]

These metalloporphyrins are unique among Fe and Co porphyrins in their high catalytic efficiency of electroreduction of H2O2 (at potentials <0.75 V vs. NHE at pH 7), as well as disproportionation and oxidation of H2O2 (at potentials >0.8 V). [Pg.680]

In some electron-rich systems, the usual trend that the isomer shift increases with the number of valence electrons appears to be inverted. This is the case for the comparison of planar iron porphyrins in the formal oxidation states (I) and (0), which are obtained by one- and two-electron reduction of iron(II) porphyrins in... [Pg.441]

Tetra(o-aminophenyl)porphyrin, H-Co-Nl TPP, can for the purpose of electrochemical polymerization be simplistically viewed as four aniline molecules with a common porphyrin substituent, and one expects that their oxidation should form a "poly(aniline)" matrix with embedded porphyrin sites. The pattern of cyclic voltammetric oxidative ECP (1) of this functionalized metal complex is shown in Fig. 2A. The growing current-potential envelope represents accumulation of a polymer film that is electroactive and conducts electrons at the potentials needed to continuously oxidize fresh monomer that diffuses in from the bulk solution. If the film were not fully electroactive at this potential, since the film is a dense membrane barrier that prevents monomer from reaching the electrode, film growth would soon cease and the electrode would become passified. This was the case for the phenolically substituted porphyrin in Fig. 1. [Pg.410]

Polymer-supported catalysts often have lower activities than the soluble catalysts because of the intraparticle diffusion resistance. In this case the immobilization of the complexes on colloidal polymers can increase the catalytic activity. Catalysts bound to polymer latexes were used in oxidation reactions, such as the Cu-catalyzed oxidation of ascorbic acid,12 the Co-catalyzed oxidation of tetralin,13 and the CoPc-catalyzed oxidation of butylphenol14 and thiols.1516 Mn(III)-porphyrin bound to colloidal anion exchange resin was... [Pg.248]

Dioxo-ruthenium porphyrin (19) undergoes epoxidation.69 Alternatively, the complex (19) serves as the catalyst for epoxidation in the presence of pyridine A-oxide derivatives.61 It has been proposed that, under these conditions, a nms-A-oxide-coordinated (TMP)Ru(O) intermediate (20) is generated, and it rapidly epoxidizes olefins prior to its conversion to (19) (Scheme 8).61 In accordance with this proposal, the enantioselectivity of chiral dioxo ruthenium-catalyzed epoxidation is dependent on the oxidant used.55,61 In the iron porphyrin-catalyzed oxidation, an iron porphyrin-iodosylbenzene adduct has also been suggested as the active species.70... [Pg.214]

Besides the use of porphyrins as azomethinic ylide derivatives, the porphyrin macrocycle can also be used to generate porphyrinic nitrile oxides 55 (Scheme 17) <04RCB(E)2192>. Thus, the treatment of oxime 54 with /V-bromosuccinimide in the presence of triethylamine, led to the formation of nitrile oxide 55, which was trapped in 1,3-DC reactions with dimethyl maleate and 2,5-norbomadiene to afford 56 and 57, respectively. In the reaction with 2,5-norbomadiene, if an excess of 55 was used, then the corresponding bis-adduct was obtained in good yield. [Pg.57]

Surface modified NO sensors incorporate an electrode surface that has been modified or treated in some way so as to increase the selectivity of the sensor for NO and promote catalytic oxidation of NO. An early example of such a sensor was presented by Malinski and Taha in 1992 [27], In this publication an —500nm diameter carbon fiber electrode was coated with tetrakis(3-methoxy-4-hydroxyphenyl)porphyrin, via oxidative polymerization, and Nation. This electrode was shown to have a detection limit of — lOnM for NO and great selectivity against common interferences. However, recently it has been shown that this electrode suffers severe interference from H202 [28],... [Pg.28]

What can all these studies suggest to the inorganic chemist interested in the controlled and fAcile catalytic oxidation of hydrocarbons Groves and coworkers have already shown that iron porphyrins in the presence of iodosylbenzene and peracids can be used for such catalytic reactions (37, 38). However, the cost of the oxidants makes such reaction uneconomical at this time. [Pg.106]

Another study by Neta and coworkers169, on the redox chemistry of several metallo-porphyrins in aqueous solution where metals were Zn, Pd, Ag, Cd, Cu, Sn and Pb, shows them to have well defined oxidation and reduction steps, yet the metals seem to exert merely an inductive effect on the porphyrin tt level. [Pg.697]

Electrochemistry. The redox processes for porphyrazines 21, 25, 28, 29, the heteroleptic Zr (pz/porphyrin) 30 and 31 have been measured by cyclic voltammetry and the formal potentials are given in Table VII. The potentials are compared to the available data for the analogous porphyrin and pc complexes. In general, the electrochemical behavior of the pz sandwiches more closely mirror that observed for the phthalocyanines than the porphyrins. In particular, all of the porphyrazines have at least one ring-based oxidation, attributable to the formation of the bis Jt-radical cation for Lu(III) sandwiches and the formation of the 7T-radical cation for the Zr(IV) and Ce(IV) sandwiches. Additionally, all of the porphyrazines exhibit at least one ring-based reduction. [Pg.496]


See other pages where Porphyrin in oxidations is mentioned: [Pg.27]    [Pg.27]    [Pg.580]    [Pg.593]    [Pg.620]    [Pg.201]    [Pg.47]    [Pg.244]    [Pg.247]    [Pg.250]    [Pg.259]    [Pg.666]    [Pg.412]    [Pg.413]    [Pg.415]    [Pg.32]    [Pg.68]    [Pg.270]    [Pg.1218]    [Pg.221]    [Pg.64]    [Pg.171]    [Pg.180]    [Pg.211]    [Pg.62]    [Pg.214]    [Pg.238]    [Pg.736]    [Pg.696]   
See also in sourсe #XX -- [ Pg.958 ]

See also in sourсe #XX -- [ Pg.474 ]




SEARCH



Porphyrin catalysts in oxidation reactions

Porphyrin oxidation

© 2024 chempedia.info