Polyvinylidene fluoride properties

Other fluorine-containing plastics These materials, in general, attempt to compromise between the exceptional end-use properties of p.t.f.e. and the processability of ordinary thermoplastics. Examples include polychlor-trifluorethylene, tetrafluorethylene-hexafluorpropylene copolymers (FEP resins) and polyvinylidene fluoride. Polyvinyl fluoride is available in film form (Tedlar) with excellent weathering resistance. 

A specific set of experiments which must be mentioned, being directly associated with the main topic of this paper, is the work of Bergman, et. al. (22) dealing with the second-order nonlinear optical properties of polyvinylidene fluoride (PVF2). Nonvanishing the second-order nonlinear electric dipole susceptibility, is expected in PVF2 since it exhibits other properties requiring noncentrosymmetric microscopic structure. These properties appear... 

It also appears, as we shall discuss presently, that some macromolecules, such as polyvinylidene fluoride noted above, have exceptional interaction properties, in which the segments may behave rather differently than the chemical monomer units would imply. For these and many related reasons, the studies of E. Helfand at Bell Laboratories on theoretical concepts of interfaces in polyphase systems of macromolecules give us a keen sense of the scope of future discoveries that are possible in this field. 

PVC, another widely used polymer for wire and cable insulation, crosslinks under irradiation in an inert atmosphere. When irradiated in air, scission predominates.To make cross-linking dominant, multifunctional monomers, such as trifunctional acrylates and methacrylates, must be added. Fluoropolymers, such as copol5miers of ethylene and tetrafluoroethylene (ETFE), or polyvinylidene fluoride (PVDF) and polyvinyl fluoride (PVF), are widely used in wire and cable insulations. They are relatively easy to process and have excellent chemical and thermal resistance, but tend to creep, crack, and possess low mechanical stress at temperatures near their melting points. Radiation has been found to improve their mechanical properties and crack resistance. Ethylene propylene rubber (EPR) has also been used for wire and cable insulation. When blended with thermoplastic polyefins, such as low density polyethylene (LDPE), its processibility improves significantly. The typical addition of LDPE is 10%. Ethylene propylene copolymers and terpolymers with high PE content can be cross-linked by irradiation. ... 

Fluoropolymers, such as copolymer of ethylene and tetrafluoroethylene (ETFE), polyvinylidene fluoride (PVDF) and polyvinyl fluoride (PVF), are widely used in wire and cable insulations. They are relatively easy to process and have excellent chemical and thermal resistance, but tend to creep, crack and possess low mechanical stress at temperatures near their melting points. Radiation has been found to improve their mechanical properties and crack resistance.36... 

More recently, modified fluoroplastics such as fluorinated ethylene/propylene copolymer, polychlorotrifluoroethylene, and polyvinylidene fluoride have been offered by DuPont, Allied Chemical, 3M, and Pennwalt respectively, to provide improved processability and mechanical strength at some sacrifice in heat-resistance, electrical properties, and chemical resistance and at prices of 3.70-7.15 these have also been finding appropriate if smaller markets. 

The principles behind ultrafiltration are sometimes misunderstood. The nomenclature implies that separations are the result of physical trapping of the particles and molecules by the filter. With polycarbonate and fiberglass filters, separations are made primarily on the basis of physical size. Other filters (cellulose nitrate, polyvinylidene fluoride, and to a lesser extent cellulose acetate) trap particles that cannot pass through the pores, but also retain macromolecules by adsorption. In particular, these materials have protein and nucleic acid binding properties. Each type of membrane displays a different affinity for various molecules. For protein, the relative binding affinity is polyvinylidene fluoride > cellulose nitrate > cellulose acetate. We can expect to see many applications of the affinity membranes in the future as the various membrane surface chemistries are altered and made more specific. Some applications are described in the following pages. 

Polyvinylidene fluoride (PVDF) and Ethylene tetrafluoroethylene copolymer (ETFE) can be considered as diluted PTFE s, which in their structure and their properties... 

Commercial products based on copolymers of ethylene and TEE are made by free radical-initiated addition copolymerization.69 Small amounts (1 to 10 mol%) of modifying comonomers are added to eliminate a rapid embrittlement of the product at exposure to elevated temperatures. Examples of the modifying comonomers are perfluorobutyl ethylene, hexafluoropropylene, perfluorovinyl ether, and hexafluoro-isobutylene.70 ETFE copolymers are basically alternating copolymers,70 and in the molecular formula, they are isomeric with polyvinylidene fluoride (PVDF) with a head-to-head, tail-to-tail structure. However, in many important physical properties, the modified ETFE copolymers are superior to PVDF with the exception of the latter s remarkable piezoelectric and pyroelectric characteristics. 

The structure of polyvinylidene fluoride chain, namely, alternating CH2 and CF2 groups, has an effect on its properties which combine some of the best performance characteristics of both polyethylene (-CH2-CH2-)n and polytetrafluoroethylene (-CF2-CF2-)n. Certain commercial grades of PVDF are copolymers of VDF with small amounts (typically less than 6%) of other fluorinated monomers, such as HFP, CTFE, and TFE. These exhibit somewhat different properties than the homopolymer. 

The unique dielectric properties and polymorphism of PVDF are the source of its high piezoelectric and pyroelectric activity.75 The relationship between ferroelectric behavior, which includes piezoelectric and pyroelectric phenomena and other electrical properties of the polymorphs of polyvinylidene fluoride, is discussed in Reference 76. 

PVDF is among the few semicrystalline polymers that exhibit thermodynamic compatibility with other polymers,80 in particular with acrylic or methacrylic resins.81 The morphology, properties, and performance of these blends depend on the structure and composition of the additive polymer, as well as on the particular PVDF resin. These aspects have been studied and are reported in some detail in Reference 82. For example, polyethyl acrylate is miscible with polyvinylidene fluoride, but polyisopropyl acrylate and homologues are not. Strong dipolar interactions are important to achieve miscibility with PVDF, as suggested by the observation that polyvinyl fluoride is incompatible with polyvinylidene fluoride.83... 

It is instructive to compare the basic properties of the piezoelectric polymer, polyvinylidene fluoride (PYDF) with those of PZT . The flexibility and low density of the polymer contrasts with the stiffness, brittleness and high density of PZT . On the other hand the piezoelectric d coefficient for PYDF is relatively small ( — 30pCN the mechanisms by which the polarisation in PVDF... 

Several plastics, with high resistance to chemical attack and high temperatures, deserve special mention for process designers of inherently safer plants. For example, tetrafluoroethylene (TFE), commonly called Teflon brand TFE, is practically unaffected by all alkalies and acids except fluorine and chlorine gas at elevated temperatures, and molten metals. It retains its properties at temperatures up to 260°C. Other plastics that have similarly excellent properties (but are different enough that they each have their niche) include chlorotrifluoroethylene (CTFE) Teflon FEP, a copolymer of tetrafluoroethylene and hexafluoropropylene polyvinylidene fluoride (PVF2) (also... 

Typical Electrical Properties of Polyvinylidene Fluoride Homopolymer... 

Powder X-Ray diffraction was employed to identify the crystalline phase of the prepared powder samples. Rietveld refinement was then performed on the XRD data to obtain the lattice constants. The electrochemical properties of LiCo,YyMn2 x.y04 powders were characterized in Li/LiCo,.YyMn2.,..y04 cells. The working electrodes were prepared by mixing polyvinylidene fluoride(PVDF), carbon black and LiCo,YyMn2.x.y04 powders in the ratio of 8 12 80% w/w, respectively. Electrochemical measurements were performed using lithium metal as counter and reference electrodes. The electrolyte was 1. OM anhydrous LiC104 dissolved in a 1 1 v/v ethylene carbonate and dimethyl carbonate mixture. The cell was cycled at a current rate of 0.2C between 3.6 and 4.3V, unless otherwise specified. 

Polyvinylidene fluoride is a semicrystalline polymer (35-70% crystallinity) with an extended zigzag chain.f Head-to-tail addition of VDF dominates, but there are head-to-head or tail-to-tail defects that affect crystallinity and properties of PVDF. It has a number of transitions, and its density alters for each polymorph state. There are four known states, named as a, (3, y, and 8, and a proposed state. The most common phase is a-PVDF, which exhibits transitions at -70°C (y), -38°C (p), 50°C (ot"), and 100°C (a ). 

Polyvinylidene fluoride (PVDF) is produced by free radical polymerization of vinylidene fluoride (CH2=CF2). The demand for PVDF has been growing remarkably because of its outstanding properties such as ... 

---