Polyurethanes High thermal stability

High Thermal Stability Polyurethane with Low Heat Generation... 

Hydroxy-3,5-ditertiarybutylphenyl)-7-chlorobenzotriazol n. An off-white, nontoxic, crystalline powder with high thermal stability, used as an ultraviolet absorber for polyolefins, PVC, polyurethanes, polyamides, and polyesters. 

A nitro analog to polyurethane 19 was prepared by triethylamine-catalyzed polycondensation of (N,N-diethanol)-4 - amino-4-nitrostilbene 16 and the chaige transporting diisocyanate 17 (Figure 6). The Xj for 19 was also 316 nm but its absorption extended out to 548 nm. The H NMR spectrum was consistent with the polyurethane structure. The TGA analysis revealed high thermal stability of the polymer, with decomposition beginning at 247. The Tg of polyurethane 19 was... 

Block copolymers can contain crystalline or amorphous hard blocks. Examples of crystalline block copolymers are polyurethanes (e.g. B.F. Goodrich s Estane line), polyether esters (e.g. Dupont s Hytrel polymers), polyether amides (e.g. Atofina s Pebax grades). Polyurethanes have enjoyed limited utility due to their relatively low thermal stability use temperatures must be kept below 275°F, due to the reversibility of the urethane linkage. Recently, polyurethanes with stability at 350°F for nearly 100 h have been claimed [2]. Polyether esters and polyether amides have been explored for PSA applications where their heat and plasticizer resistance is a benefit [3]. However, the high price of these materials and their multiblock architecture have limited their use. All of these crystalline block copolymers consist of multiblocks with relatively short, amorphous, polyether or polyester mid-blocks. Consequently they can not be diluted as extensively with tackifiers and diluents as styrenic triblock copolymers. Thereby it is more difficult to obtain strong, yet soft adhesives — the primary goals of adding rubber to hot melts. 

Much attention has been paid to the synthesis of fluorine-containing condensation polymers because of their unique properties (43) and different classes of polymers including polyethers, polyesters, polycarbonates, polyamides, polyurethanes, polyimides, polybenzimidazoles, and epoxy prepolymers containing pendent or backbone-incorporated bis-trifluoromethyl groups have been developed. These polymers exhibit promise as film formers, gas separation membranes, seals, soluble polymers, coatings, adhesives, and in other high temperature applications (103,104). Such polymers show increased solubility, glass-transition temperature, flame resistance, thermal stability, oxidation and environmental stability, decreased color, crystallinity, dielectric constant, and water absorption. 

As a general rule the thermal stability of polyurethanes is directly linked with the mobility of polymeric chains. Low mobility, crosslinked polyurethane structures, based on high functionality polyols are more thermostable than the high mobility, low crosslinked... 

Aerogels are particularly well suited for insulation applications because of their exceptionally low density, thermal stability, and high transparency. In fact, they can have a thermal conductivity only one-third that of polyurethane or polystyrene foam, and with recent process improvements that reduce the cost of manufacmre by an order of magnitude their practical use in certain construction applications is now feasible [31]. The insulating properties can be enhanced through the addition of IR opacifiers [32]. The high transparency of aerogels makes them suitable as insulation in windows or translucent panels. 

Polyurethanes Good flexibility at low temperatures. Stress absorbing. Highly versatile chemistry. Lower thermal stability and service temperature than epoxies (150°C-163°C). Average bond strength unless primer used. 

The initial degradation of vegetable oil-based polyurethanes occurs at a faster rate than in synthetic poly(propylene oxide) (PPO)-based polyurethanes, although at relatively high temperatures, PPO-based polyurethanes display a faster loss. However, the situation is reversed in an oxygen atmosphere (air). Thus, vegetable oil-based polyurethanes exhibit better oxidative thermal stability than standard PPO-based polyurethane. ... 

As with other polymers and resins, the modification of epoxy resins eliminates a number of disadvantages including brittleness, low thermal stability and high flammability to give the required properties for end applications. Considerable effort has therefore been made to improve the thermal and mechanical properties of vegetable oil-based epoxy resins. These may be grafted or blended with other flexible resins such as polyester, polyacrylate and polyurethane to improve their flexibility and other performance characteristics. 

Besides durability, premium sealants are judged by special properties as shown in Table 4. The ability to take on greater elongation and compression is measured by movement capability in terms of joint width. The stability to UV exposure is important for those glazing and insulation compounds used in modern high-rise structures. Thermal stability is in demand for solar collectors, or for other structural materials. On the basis of these evaluations, we can foresee future trends of sealants as shown in Table 4. Silicones appear to out-perform others. In the meantime, technical advances will provide low-modulus polysulfides, and better movement ability for both polysulfides and polyurethanes. Their cure time will be decreased and the UV stability will be improved to match or compete with silicones. All three will be developed for better adhesion under the un-primed conditions. 

---