Polytetrafluoroethylene properties

Tetrafluoroethylene. Emulsion polymerisation of tetrafluoroethylene, catalysed by oxygen, yields polytetrafluoroethylene (Tejlon) as a very tough horn-hke material of high melting point. It possesses excellent electrical insulation properties and a remarkable inertness towards all chemical reagents, including aqua regia. 

Electrical Properties. Polytetrafluoroethylene is an excellent electrical insulator because of its mechanical strength and chemical and thermal stabihty as well as excellent electrical properties (Table 6). It does not absorb water and volume resistivity remains unchanged even after prolonged soaking. The dielectric constant remains constant at 2.1 for a temperature range of —40 to 250°C and a frequency range of 5 Hz to 10 GHz. 

Surface Protection. The surface properties of fluorosihcones have been studied over a number of years. The CF group has the lowest known intermolecular force of polymer substituents. A study (6) of liquid and solid forms of fluorosihcones has included a comparison to fluorocarbon polymers. The low surface tensions for poly(3,3,3-trifluoropropyl)methylsiloxane and poly(3,3,4,4,5,5,6,6,6-nonafluorohexyl)methylsiloxane both resemble some of the lowest tensions for fluorocarbon polymers, eg, polytetrafluoroethylene. 

Electrical Properties. AH polyolefins have low dielectric constants and can be used as insulators in particular, PMP has the lowest dielectric constant among all synthetic resins. As a result, PMP has excellent dielectric properties and alow dielectric loss factor, surpassing those of other polyolefin resins and polytetrafluoroethylene (Teflon). These properties remain nearly constant over a wide temperature range. The dielectric characteristics of poly(vinylcyclohexane) are especially attractive its dielectric loss remains constant between —180 and 160°C, which makes it a prospective high frequency dielectric material of high thermal stabiUty. 

Composites. Another type of electro deposit in commercial use is the composite form, in which insoluble materials are codeposited along with the electro-deposited metal or alloy to produce particular desirable properties. Polytetrafluoroethylene (PTFE) particles are codeposited with nickel to improve lubricity (see Lubrication and lubricants). SiHcon carbide and other hard particles including diamond are co-deposited with nickel to improve wear properties or to make cutting and grinding tools (see Carbides Tool materials). 

Blends of the polysulfone tesia have been made with ABS, poly(ethylene terephthalate), polytetrafluoroethylene (PTFE), and polycarbonate. These ate sold by Amoco under the Miadel trademark. Additional materials ate compounded with mineral filler, glass, or carbon fiber to improve properties and lower price. 

Technical Service Note F. 12 Physical Properties of Polytetrafluoroethylene, ICI Ltd. (Plastics Division), Welwyn Garden City (1966)... 

Shock-resistant, flexible hose (Figure 40.32) assemblies are required to absorb the movements of mounted equipment under both normal operating conditions and extreme conditions. They are also used for their noiseattenuating properties and to connect moving parts of certain equipment. The two basic hose types are synthetic rubber and polytetrafluoroethylene (PTFE), such as DuPont s Teflon fluorocarbon resin. 

Some authors have suggested the use of fluorene polymers for this kind of chromatography. Fluorinated polymers have attracted attention due to their unique adsorption properties. Polytetrafluoroethylene (PTFE) is antiadhesive, thus adsorption of hydrophobic as well as hydrophilic molecules is low. Such adsorbents possess extremely low adsorption activity and nonspecific sorption towards many compounds [109 111]. Fluorene polymers as sorbents were first suggested by Hjerten [112] in 1978 and were tested by desalting and concentration of tRN A [113]. Recently Williams et al. [114] presented a new fluorocarbon sorbent (Poly F Column, Du Pont, USA) for reversed-phase HPLC of peptides and proteins. The sorbent has 20 pm in diameter particles (pore size 30 nm, specific surface area 5 m2/g) and withstands pressure of eluent up to 135 bar. There is no limitation of pH range, however, low specific area and capacity (1.1 mg tRNA/g) and relatively low limits of working pressure do not allow the use of this sorbent for preparative chromatography. 

Polytetrafluoroethylene (Teflon) (PTFE) is the most corrosion-resistant thermoplastic polymer. This polymer is resistant to practically every known chemical or solvent combination and has the highest useful temperature of commercially available polymers. It retains its properties up to 500°F (260°C). Because of its exceedingly high molecular weight PTFE is processed by sintering. The PTFE resin is compressed into shapes under high pressure at room temperature and then heated to 700°F (371°C) to complete the sintering process. 

Q. Lu and S.S. Hu, Studies on direct electron transfer and biocatalytic properties of haemoglobin in polytetrafluoroethylene film. Chem, Phys. Lett. 424, 167-171 (2006). 

It resembles polytetrafluoroethylene and fluorinated ethylene propylene in its chemical resistance, electrical properties, and coefficient of friction. Its strength, hardness, and wear resistance are about equal to the former plastic and superior to that of the latter at temperatures above 150°C. 

Polytetrafluoroethylene ionomers, properties of, 14 475 76 Poly(tetrafluoroethylene-co-hexafluoropropylene) films, 23 720... 

The success of this and the other operations derives from the correct application of back-pulse filtration principles, in particular the back-pulse step itself in which the filter cloths are cleaned and made ready for further filtration. The properties of the GORE-TEX membrane, composed of expanded polytetrafluoroethylene, give rise to the desirable results of these brine filtrations, in particular ... 

ISO 13000-2 1997 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products -Part 2 Preparation of test specimens and determination of properties... 

The most relevant property of stereoregular polymers is their ability to crystallize. This fact became evident through the work of Natta and his school, as the result of the simultaneous development of new synthetic methods and of extensive stractural investigations. Previously, the presence of crystalline order had been ascertained only in a few natural polymers (cellulose, natural rubber, bal-ata, etc.) and in synthetic polymers devoid of stereogenic centers (polyethylene, polytetrafluoroethylene, polyamids, polyesters, etc.). After the pioneering work of Meyer and Mark (70), important theoretical and experimental contributions to the study of crystalline polymers were made by Bunn (159-161), who predicted the most probable chain conformation of linear polymers and determined the crystalline structure of several macromolecular compounds. 

---