Polyolefin, linear

Thermoplastic materials often have a lower surface energy than do thermosetting materials. Thus, physical or chemical modification of the surface is necessary to achieve acceptable bonding. This is especially true of the crystalline thermoplastics such as polyolefins, linear polyesters, and fluoropolymers. Methods used to increase the surface energy and improve wettability and adhesion include... 

The motivation behind the molecular design of Nodax class PHA copolymers closely follows that of the well-known industrial polyolefin linear low density polyethylene (LLDPE). LLDPE is a random copolymer of ethylene with a small amount of a-olefin units, such as 1-butene or 1-hexene, which will result in the formation of the polymer chain structure with mcl alkyl side group branches. In a similar manner, one can envision the possibility of creating a polymer structure of LLDPE with a PHA backbone having short alkyl side chains, as depicted in Fig. 2. 

Many plastics and plastic composites can be treated prior to adhesive bonding by simple mechanical abrasion or alkaline cleaning to remove surface contaminants. In some cases it is necessary that the polymeric surface be physically or chemically modified to achieve acceptable bonding. This applies particularly to crystalline thermoplastics such as the polyolefins, linear polyesters, and fluorocarbons. Methods used to improve the bonding characteristics of these surfaces include ... 

Blends of primary anti-oxidants and a high-temperature hydrolytically stable organophosphite secondary anti-oxidant have been developed for high-temperature processing of polyolefins, polyamides, and polycarbonates in colour-critical applications. Irganox LM blends of primary anti-oxidants and a new phosphite processing stabilizer offer melting at 90°C and can be applied to polymer reactor products, especially polyolefins, linear polyesters, polycarbonates, polyamides, HIPS, ABS, SAN, and elastomers. 

Polymorphism. Many crystalline polyolefins, particularly polymers of a-olefins with linear alkyl groups, can exist in several polymorphic modifications. The type of polymorph depends on crystallisa tion conditions. Isotactic PB can exist in five crystal forms form I (twinned hexagonal), form II (tetragonal), form III (orthorhombic), form P (untwinned hexagonal), and form IP (37—39). The crystal stmctures and thermal parameters of the first three forms are given in Table 3. Form II is formed when a PB resin crystallises from the melt. Over time, it is spontaneously transformed into the thermodynamically stable form I at room temperature, the transition takes about one week to complete. Forms P, IP, and III of PB are rare they can be formed when the polymer crystallises from solution at low temperature or under pressure (38). Syndiotactic PB exists in two crystalline forms, I and II (35). Form I comes into shape during crystallisation from the melt (very slow process) and form II is produced by stretching form-1 crystalline specimens (35). 

Polybutenes enjoy extensive use as adhesives, caulks, sealants, and glaring compounds. They are used as plasticizers in mbber formulations with butyl mbber, SBR, and natural mbber. In linear low density polyethylene (LLDPE) blends they induce cling to stretch-wrap films. Polybutenes when modified at their unsaturated end groups with polar fiinctionahty are widely employed in lubricants as dispersants. Blends of polybutene with polyolefins produce semisoHd gels that can be used as potting and electrical cable filling materials. 

The aim of this research was the preparation of unique silicon-functional macroreagents, particularly linear polyolefins carrying one or two Si-Cl or Si-H termini and thus to combine the excellent physical properties offered by these polyhydrocarbons with the versatility and chemical reactivity of the Si-Cl and Si-H bonds. 

Most commercial polymers are substantially linear. They have a single chain of mers that forms the backbone of the molecule. Side-chains can occur and can have a major affect on physical properties. An elemental analysis of any polyolefin, (e.g., polyethylene, polypropylene, poly(l-butene), etc.) gives the same empirical formula, CH2, and it is only the nature of the side-chains that distinguishes between the polyolefins. Polypropylene has methyl side-chains on every other carbon atom along the backbone. Side-chains at random locations are called branches. Branching and other polymer structures can be deduced using analytical techniques such as NMR. 

The metal catalyzed production of polyolefins such as high density polyethylene (HDPE), linear low density polyethylene (LLDPE) and polypropylene (PP) has grown into an enormous industry. Heterogeneous transition metal catalysts are used for the vast majority of PE and all of the PP production. These catalysts fall generally within two broad classes. Most commercial PP is isotactic and is produced with a catalyst based on a combination of titanium chloride and alkylaluminum chlorides. HDPE and LLDPE are produced with either a titanium catalyst or one based on chromium supported on silica. Most commercial titanium-based PE catalysts are supported on MgCl2. 

And finally, irrespective of the types of elements in the backbone, the properties of a linear polymer will depend on the side groups attached to that backbone. This principle underlies all polyolefin and polyvinyl macromolecular science and technology. It applies equally well to inorganic polymer systems. 

However, the practical, direct synthesis of functionalized linear polyolefins via coordination copolymerization olefins with polar monomers (CH2 = CHX) remains a challenging and industrially important goal. In the mid-1990s Brookhart et al. [25, 27] reported that cationic (a-diimine)palladium complexes with weakly coordinating anions catalyze the copolymerization of ethylene with alkylacrylates to afford hyperbranched copolymers with the acrylate functions located almost exclusively at the chain ends, via a chain-walking mechanism that has been meticulously studied and elucidated by Brookhart and his collaborators at DuPont [25, 27], Indeed, this seminal work demonstrated for the first time that the insertion of acrylate monomers into certain late transition metal alkyl species is a surprisingly facile process. It spawned almost a decade of intense research by several groups to understand and advance this new science and to attempt to exploit it commercially [30-33, 61]. 

After five decades of catalyst research there is slowly emerging a family of discrete late transition metal catalysts that are capable of generating high molecular weight, linear, random copolymers of ethylene and polar comonomers such as acrylates. Further advances in the efficiency of these catalysts will likely give rise to new families of commercial polyolefins with a wealth of new performance properties imparted by the polar groups attached to the polymer backbone. 

Similarly large anisotropies were later reported for highly emissive blends of alkoxy-substituted bis(phenylethynyl)benzene derivatives and polyolefins such as linear low-density polyethylene (LLDPE) and isotactic polypropylene (z-PP) [8,9]. The latter systems reach high levels of anisotropy at very low draw ratios, which is advantageous from a processing point of view. 

---