Polymers, carbanionic chain ended

A fairly narrow MWD results from this polymerization. The living nature of polymerization allows control of branching and the production of rubbers with broadened MWDs, as shown in Fig. 8, for the case of post-reaction of reactive polymer carbanion chain ends with DVB. These branched polymers are easily oil-extended and exhibit lower cold flow than their hnear counterparts. 

The alkyllithium-initiated, anionic polymerization of vinyl and diene monomers can often be performed without the incursion of spontaneous termination or chain transfer reactions (1). The non-terminating nature of these reactions has provided methods for the synthesis of polymers with predictable molecular weights and narrow molecular weight distributions (2). In addition, these polymerizations generate polymer chains with stable, carbanionic chain ends which, in principle, can be converted into a diverse array of functional end groups using the rich and varied chemistry of organolithium compounds (3). 

Polar Vinyl Monomers The anionic polymerization of polar vinyl monomers is often complicated by side reactions of the monomer with both anionic initiators and growing carbanionic chain ends, as well as chain termination and chain transfer reactions. However, synthesis of polymers with well-defined structures can be effected under carefully controlled conditions. The anionic polymerizations of alkyl methacrylates and 2-vinylpyridine exhibit the characteristics of living polymerizations under carefully controlled reaction conditions and low polymerization temperatures to minimize or eliminate chain termination and transfer reactions [118, 119]. Proper choice of initiator for anionic polymerization of polar vinyl monomers is of critical importance to obtain polymers with predictable, well-defined structures. As an example of an initiator that is too reactive, the reaction of methyl methacrylate (MMA)... 

The active carbanion chain ends are contained in the polymer particle and are very accessible to the monomer which remains soluble in the pol niierization medium. 

Alkyllithitim-initiated, anionic polymerization of vinyl monomers is a very useful synthetic method since the major variables affecting polymer properties can generally be controlled, e.g., molecular weight, molecular weight distribution, copolymer structure and composition, configurational microstructure, molecular architecture, and chain-end functionality. This control is a direct consequence of the fact that in the absence of reactive impurities many of these polymerizations are termination and chain transfer free therefore, the products of these polymerizations are living polymers" with carbanionic chain ends. 

SCHEME 2.5 General functionalization method for carbanion chain ends (P = polymer) using hydrosilylation chemistry. 

Interest in anionic polymerizations arises in part from the reactivity of the living carbanionic sites4 7) Access can be provided to polymers with a functional chain end. Such species are difficult to obtain by other methods. Polycondensations yield ro-functional polymers but they provide neither accurate molecular weight control nor low polydispersity. Recently Kennedy51) developed the inifer technique which is based upon selective transfer to fit vinylic polymers obtained cationically with functions at chain end. Also some cationic ring-opening polymerizations52) without spontaneous termination can yield re-functional polymers upon induced deactivation. Anionic polymerization remains however the most versatile and widely used method to synthesize tailor made re-functional macromolecules. 

Anionic polymerizations are well suited for the synthesis of polymers fitted at chain end with reactive functions. Block copolymers can result from reactions between suitable functions carried by two different functional precursors. In some cases the carbanionic sites themselves are the reactive functions. In other cases, functional polymers (obtained anionically, or by other methods) can be reacted with low molecular weight coupling agents. Here are a few examples ... 

Functionalization of these reactive anionic chain ends can be achieved by a variety of methods all based on the general concepts of carbanion chemistry. For example, reaction with C02 or succinnic anhydride leads to the carboxy terminated derivatives [10], while hydroxy-terminated polymers can be easily obtained by reaction with ethylene oxide (Scheme 3) [11]. In select functionalization reactions, such as alkylation with p-vinyl benzyl chloride, the nucleophilicity of the carbanionic species may be necessary and this can be achieved by reaction of the chain end with 1,1-diphenylethene followed by functionalization [12,13]. 

The mechanism for the stereoselective polymerization of a-olefins and other nonpolar alkenes is a Ti-complexation of monomer and transition metal (utilizing the latter s if-orbitals) followed by a four-center anionic coordination insertion process in which monomer is inserted into a metal-carbon bond as described in Fig. 8-10. Support for the initial Tt-com-plexation has come from ESR, NMR, and IR studies [Burfield, 1984], The insertion reaction has both cationic and anionic features. There is a concerted nucleophilic attack by the incipient carbanion polymer chain end on the a-carbon of the double bond together with an electrophilic attack by the cationic counterion on the alkene Ti-electrons. 

The need for well defined polymer species of low polydls-perelty and of known structure arises from the Increasing Interest In structure-properties relationship In dilute solution as well as In the bulk. A great variety of methods have been attempted, to synthesize so-called model macromolecules or tailor made polymers-over the past 20 years. The techniques based on anionic polymerization, when carried out In aprotic solvents, have proved best suited for such synthesis, because of the absence of spontaneous transfer and termination reactions that characterize such systems. The "living 1 polymers obtained are fitted at chain end with carbanionic sites, which can either Initiate further polymerization, or react with various electrophilic compounds, intentionally added to achieve functionalizations. Another advantage of anionic polymerizations is that di-functlonal Initiators are available, yielding linear polymers fitted at both chain ends with carbanionic sites. In this paper we shall review the various utility of anionic polymerization to the synthesis of tailor made well defined macromolecules of various types. 

The use of alkyllithium initiators which contain functional groups provides a versatile method for the preparation of end functionalized polymers and macromonomers. For a living anionic polymerization, each functionalized initiator molecule produces one macromolecule with the functional group from the initiator residue at one chain end and the active carbanionic propagating species at the other chain end. 

SCBs play an important role in the formation of other block copolymers. For example, the relatively less nucleophilic poly(ethylene oxide) oxyanion cannot initiate the polymerization of styrene, which needs a more nucleophilic alkyllithium initiator. To enable the synthesis of multi-block copolymers from various combinations of monomers by anionic mechanisms, it is important to modify the reactivity of the growing anionic chain end of each polymer so as to attack the co-monomer. There have only been a few reports on the polymerization of styrene initiated by an oxyanion (see <2001MM4384> and references cited). Thus, there exists a need for a transitional species that is capable of converting oxyanions into carbanions. In 2000, Kawakami and co-workers came up with the concept of the carbanion pump , in which the ring-strain energy of the SCB is harnessed to convert an oxyanion into a carbanion (Scheme 13) <2000MI527>. 

Anionic polymerizations, when carried out in aprotic solvents, are characterized by the long lifetime of the carbanionic (or oxanionic) sites l2). When neither spontaneous transfer nor termination reactions are involved, the polymers obtained exhibit sharp molecular weight distributions, and their number average degree of polymerization is determined by the [Monomer]/[Initiator] molar ratio, provided initiation is fast as compared to propagation. However, the major advantage of these methods, as far as synthesis is concerned, is the socalled living character of the polymers 12) After completion of the polymerization the active sites retain their reactivity and can be used for functionalizations at the chain end. 

However, as in the preceding case, the hydrogen (both allylic and benzylic) in P-position with respect to the carbanionic site is acidic and metalation occurs readily at the expense of another living polymer molecule. Therefore, the fraction of the macromolecules bearing active carbon-carbon double bonds at a chain end is 0.5. 

The reaction of an unsaturated compound with an antagonist function located at the end of a polymer chain is still the most commonly used method to synthesize macromonomers. We have already mentioned some processes that can be used to introduce into the chain end of a macromolecule a functional group, e.g. by deactivation of living carbanionic sites and transfer reactions of various kinds in cationic polymerization. We have also described some methods used to link an active terminal double bond to the chain end originally bearing hydroxy groups. 

Various modes of termination of anionic polymerization can be visualized. The growing chain end could split out a hydride ion to leave a residual double bond. This is, however, a high activation energy process and has not as yet been reported in the cases where alkali metal cations are present. It is important in systems involving Al—C bonds, however (73). A second possibility is termination through isomerization of the carbanion to an inactive anion. Proton transfer from solvent, polymer, or monomer would also cause termination of the growing chain. Lastly, the carbanion could undergo an irreversible reaction with solvent or monomer. The latter three types have been shown or postulated as termination or transfer reactions. 

---