Polymer Technology Systems, Inc

PTS Bioscanner Test Strips Cholesterol Polymer Technology Systems, Inc. ... 

T0614 Polylonix Separation Technologies, Inc., Polymer Filtration System T0615 Polymer-Based Sohdification/Stabilization—General... 

Cold-rolled steel panels were purchased from Advanced Coating Technologies, Inc. (Hillsdale, Michigan). Silane chemicals (methylsilane, trimethylsilane, and tetramethylsilane) were purchased from Petrarch Systems, Inc. The silane plasma-deposited steel was then dip-coated with a polymer film 10-25 pim thick. The polymer coating resins used were silane-modified polymers with functionalities such as hydroxyl, acrylate, or amine. 

There is a demand for more powerful polymers like for example PEEK [103, 107, 111], which enables new application areas in the automobile industry and medical fields, as shown in Fig. 81 and underlines the increasing potential of SLS-technologies. Because of this EOS GmbH recently presented a high temperature system, EOSINT P 800, along with PEEK HP3 for SLS. There is a further interest in qualification of bulk polymers like polypropylene [100]. 3D Systems Inc. recently presented DuraForm PP 100 for SLS. Further more there is an interest in some technical polymers like Polyoxymethylene [112]. 

The non-random two-liquid segment activity coefficient model is a recent development of Chen and Song at Aspen Technology, Inc., [1], It is derived from the polymer NRTL model of Chen [26], which in turn is developed from the original NRTL model of Renon and Prausznitz [27]. The NRTL-SAC model is proposed in support of pharmaceutical and fine chemicals process and product design, for the qualitative tasks of solvent selection and the first approximation of phase equilibrium behavior in vapour liquid and liquid systems, where dissolved or solid phase pharmaceutical solutes are present. The application of NRTL-SAC is demonstrated here with a case study on the active pharmaceutical intermediate Cimetidine, and the design of a suitable crystallization process. 

T0005 Active Environmental Technologies, Inc., TechXtract T0025 Akzo Nobel MPP Systems, Macro Porous Polymer (MPP)... 

Air Products and Chemicals, Inc. has been selected to supply a hydrocarbon and nitrogen recovery system for a new polyethylene manufacturing plant in Baytown, TX. The plant will be owned by Chevron Phillips Chemical Company and Solvay Polymers, Inc. The recovery system uses partial condensation in conjunction with Air Products pressure swing adsorption technology to recover hydrocarbons in the polyolefin plants, and recycle nitrogen with a purity of greater than 99%55. 

---