Polymer-supported, acid synthesis

The structures of these ylide polymers were determined and confirmed by IR and NMR spectra. These were the first stable sulfonium ylide polymers reported in the literature. They are very important for such industrial uses as ion-exchange resins, polymer supports, peptide synthesis, polymeric reagent, and polyelectrolytes. Also in 1977, Hass and Moreau [60] found that when poly(4-vinylpyridine) was quaternized with bromomalonamide, two polymeric quaternary salts resulted. These polyelectrolyte products were subjected to thermal decyana-tion at 7200°C to give isocyanic acid or its isomer, cyanic acid. The addition of base to the solution of polyelectro-lyte in water gave a yellow polymeric ylide. 

E. Eichler, F. Yan, J. Sealy, and D. M. Whitfield, 1-Methyl l -cyclopropylmethyl - An acid labile O-protecting group for polymer-supported oligosaccharide synthesis, Tetrahedron, 57 (2001) 6679-6693. 

However, even the pre-synthesized tetrazolides were still too reactive to be routinely used in the automated solid phase synthesis. The major advance that solved the problem was made in 1981, when Beaucage and Caruthers, who were experimenting with the nucleoside 3 -phosphoramidite derivatives [83] following some previous Russian work on the phosphorus(III)-amino compounds [84], discovered that these otherwise pretty stable compounds can be rapidly and very efficiently coupled to a solid-supported nucleoside in the presence of a mildly acidic nucleophilic catalyst, tetrazole [85]. This discovery combined with the already existing solid-phase assembly layout [68, 69, 82] paved the way for the very rapid expansion of the polymer-supported oligonucleotide synthesis, which has been summarized in the timely book edited by Gait [12a]. 

Sinha, N. D., Biernat, J., and Koster, H. (1984) Polymer support oligonucleotide synthesis XVIII use of [i-cyanoethyl-V,V-dialkylamino-/N-morpholino phosphoramidite of deoxy nucleosides for the synthesis of DNA fragments simplifying deprotection and isolation of the final product. NucL Acids Res 12, 4539-4557. 

The N-to-C assembly of the peptide chain is unfavorable for the chemical synthesis of peptides on solid supports. This strategy can be dismissed already for the single reason that repeated activation of the carboxyl ends on the growing peptide chain would lead to a much higher percentage of racemization. Several other more practical disadvantages also tend to disfavor this approach, and acid activation on the polymer support is usually only used in one-step fragment condensations (p. 241). 

Polymer-supported esters are widely used in solid-phase peptide synthesis, and extensive information on this specialized protection is reported annually. Some activated esters that have been used as macrolide precursors and some that have been used in peptide synthesis are also described in this chapter the many activated esters that are used in peptide synthesis are discussed elsewhere. A useful list, with references, of many protected amino acids (e.g., -NH2, COOH, and side-chain-protected compounds) has been compiled/ Some general methods for the preparation of esters are provided at the beginning of this chapter conditions that are unique to a protective group are described with that group/ Some esters that have been used as protective groups are included in Reactivity Chart 6. 

Allylic alcohols can be converted to epoxy-alcohols with tert-butylhydroperoxide on molecular sieves, or with peroxy acids. Epoxidation of allylic alcohols can also be done with high enantioselectivity. In the Sharpless asymmetric epoxidation,allylic alcohols are converted to optically active epoxides in better than 90% ee, by treatment with r-BuOOH, titanium tetraisopropoxide and optically active diethyl tartrate. The Ti(OCHMe2)4 and diethyl tartrate can be present in catalytic amounts (15-lOmol %) if molecular sieves are present. Polymer-supported catalysts have also been reported. Since both (-t-) and ( —) diethyl tartrate are readily available, and the reaction is stereospecific, either enantiomer of the product can be prepared. The method has been successful for a wide range of primary allylic alcohols, where the double bond is mono-, di-, tri-, and tetrasubstituted. This procedure, in which an optically active catalyst is used to induce asymmetry, has proved to be one of the most important methods of asymmetric synthesis, and has been used to prepare a large number of optically active natural products and other compounds. The mechanism of the Sharpless epoxidation is believed to involve attack on the substrate by a compound formed from the titanium alkoxide and the diethyl tartrate to produce a complex that also contains the substrate and the r-BuOOH. ... 

Polymer supported xanthene derivatives have been used in the solid phase synthesis of 1-aminophosphinic acids, RCH(NH2)PH(0)0H, <%TL1647> and of C-terminal peptide amides <96JOC6326>. Xanthene units also feature in crown ethers <96JCS(P2)2091>, calixarenes <96JOC5670> and in a flexible template for a P-sheet nucleator <96JOC7408>. 

In the synthesis of polypeptides with biological activity on a crosslinked polymer support as pioneered by Merrifield (1 2) a strict control of the amino acid sequence requires that each of the consecutive reactions should go virtually to completion. Thus, for the preparation of a polypeptide with 60 amino acid residues, even an average conversion of 99% would contaminate the product with an unacceptable amount of "defect chains". Yet, it has been observed (13) that with a large excess of an amino acid reagent —Tn the solution reacting with a polymer-bound polypeptide, the reaction kinetics deviate significantly from the expected exponential approach to quantitative conversion, indicating that the reactive sites on the polymer are not equally reactive. 

The best results in the imidazole synthesis were obtained by microwave-assisted reaction of an eightfold excess of the polymer-supported isonitrile suspended in 1,2-dimethoxyethane (DME) with the appropriate amines. Cleavage with 50% trifluoroacetic acid in dichloromethane afforded the desired heterocyclic scaffolds in moderate yields. 

Several microwave-assisted protocols for soluble polymer-supported syntheses have been described. Among the first examples of so-called liquid-phase synthesis were aqueous Suzuki couplings. Schotten and coworkers presented the use of polyethylene glycol (PEG)-bound aryl halides and sulfonates in these palladium-catalyzed cross-couplings [70]. The authors demonstrated that no additional phase-transfer catalyst (PTC) is needed when the PEG-bound electrophiles are coupled with appropriate aryl boronic acids. The polymer-bound substrates were coupled with 1.2 equivalents of the boronic acids in water under short-term microwave irradiation in sealed vessels in a domestic microwave oven (Scheme 7.62). Work-up involved precipitation of the polymer-bound biaryl from a suitable organic solvent with diethyl ether. Water and insoluble impurities need to be removed prior to precipitation in order to achieve high recoveries of the products. 

The aforementioned polymer-supported bis-pyridyl ligand has also been applied in microwave-assisted asymmetric allylic alkylation [140], a key step in the enantio-selective synthesis of (R)-baclofen (Scheme 7.118), as reported by Moberg and coworkers. The ( (-enantiomer is a useful agonist of the GABAb (y-aminobutyric acid) receptor, and the racemic form is used as a muscle relaxant (antispasmodic). Under microwave heating, the enantioselectivity could be improved to 89% when using toluene as solvent (see also Scheme 6.52) [140],... 

In a more recent study, Wang and coworkers have discussed microwave-assisted Suzuki couplings employing a reusable polymer-supported palladium complex [141]. The supported catalyst was prepared from commercial Merrifield polystyrene resin under ultrasound Bonification. In a typical procedure for biaryl synthesis, 1 mmol of the requisite aryl bromide together with 1.1 equivalents of the phenyl-boronic acid, 2.5 equivalents of potassium carbonate, and 10 mg of the polystyrene-... 

Polymer-bound 1-hydroxybenzotriazole 1008 reacts with carboxylic acids in the presence of 1,3-diisopropylcarbo-diimide (1,3-DIC) and DMAP to produce esters 1009. Treated with hydroxylamine, esters 1009 are converted to hydroxamic acids 1010 (Scheme 167) <20030BC850>. Starting 1-hydroxybenzotriazole 1008 is recycled in the process and can be used for other syntheses. This method is well suited for automated synthesis of a library of hydroxamic acids. In similar applications of polymer-supported 1-hydroxybenzotriazole 1008, a wide variety of amides is synthesized <1997JOC2594, 2002JC0576>. 

---