Polymer reaction polyolefin

A pioneering and comprehensive study of the effect of copper on the thermal oxidative degradation of polyolefins has been made by a Bell Laboratories research group (1-6). They found that surface reactions at the interface between metal and polymer are important factors in many applications including metal-polymer composites, polyolefin-insulated... 

J. Soarez, T. McKenna, Polymer Reaction Engineering. Polyolefin Reactors and Processes . (Wiley, Hoboken, 2012) doi 10.1002/9783527646944.ch4... 

From a polymer reaction engineering point of view, polyolefins made with metallocene catalysts provide an excellent opportunity for model development because they have well-behaved microstructures. Later it will be shown that models developed for single-site catalysts can also be extended to describe the more complex microstructures of polyolefins made with multiple-site catalysts such as Ziegler-Natta and Phillips catalysts. 

Polyolefins are produced in practically all types of reactor configurations -autoclaves, tubular reactors, loop reactors, fiuidized-bed reactors - making them a prime choice for polymer reaction engineering studies. Polymerization may take place in either gas or liquid phases. For liquid-phase reactors, the monomers can be either liquid (as in the case of propylene and higher a-olefins) or dissolved in an inert diluent. Industrial catalysts for olefin polymerization are mainly heterogeneous, but some processes also use soluble catalysts. There are many different types of catalysts for olefin polymerization and they can be used to synthesize polymer chains with very different microstructures and properties. 

As compared with conventional monomeric reactions, analogous polymer reactions are hindered by slow diffusion, low concentration of reactive groups, steric hindrance, and short time in the extruder [8] and polyolefins in particular have very little natural reactivity available for rapid efficient synthesis of... 

The most important chain-growth polymers are polyolefins and other vinyl polymers. Examples of the former are polyethylene, and polypropylene, and examples of the latter are poly(vinyl chloride), polystyrene, poly(vinyl alcohol), polyacrylonitrile, and poly(methyl acrylates). The most common stepwise reactions are condensation polymerizations. Polyamides, such as nylon 6-6, which is poly(hexamethylene adipamide), and polyesters, such as poly(ethylene terephthalate), are the most important commercial condensation polymers. These polymers were originally developed for use in fiber manufacture because of their high melting points but are now used also as thermoplastics. Polycarbonate is an engineering plastic that is made from bisphenol A and phosgene by a stepwise reaction. 

Supercritical fluids are already used as alternative for classical separation processes such as extraction, adsorption, chromatography, and crystallization, as reaction media as in polymerization or depolymerization, as plasticization agents or simply as particles, fibers, or foams formation even some processes becoming commercial. A variety of polymers, including polyolefins. 

In order for a soHd to bum it must be volatilized, because combustion is almost exclusively a gas-phase phenomenon. In the case of a polymer, this means that decomposition must occur. The decomposition begins in the soHd phase and may continue in the Hquid (melt) and gas phases. Decomposition produces low molecular weight chemical compounds that eventually enter the gas phase. Heat from combustion causes further decomposition and volatilization and, therefore, further combustion. Thus the burning of a soHd is like a chain reaction. For a compound to function as a flame retardant it must intermpt this cycle in some way. There are several mechanistic descriptions by which flame retardants modify flammabiUty. Each flame retardant actually functions by a combination of mechanisms. For example, metal hydroxides such as Al(OH)2 decompose endothermically (thermal quenching) to give water (inert gas dilution). In addition, in cases where up to 60 wt % of Al(OH)2 may be used, such as in polyolefins, the physical dilution effect cannot be ignored. 

Other than fuel, the largest volume appHcation for hexane is in extraction of oil from seeds, eg, soybeans, cottonseed, safflower seed, peanuts, rapeseed, etc. Hexane has been found ideal for these appHcations because of its high solvency for oil, low boiling point, and low cost. Its narrow boiling range minimises losses, and its low benzene content minimises toxicity. These same properties also make hexane a desirable solvent and reaction medium in the manufacture of polyolefins, synthetic mbbers, and some pharmaceuticals. The solvent serves as catalyst carrier and, in some systems, assists in molecular weight regulation by precipitation of the polymer as it reaches a certain molecular size. However, most solution polymerization processes are fairly old it is likely that those processes will be replaced by more efficient nonsolvent processes in time. 

Thermal, Thermooxidative, and Photooxidative Degradation. Polymers of a-olefins have at least one tertiary C-H bond in each monomer unit of polymer chains. As a result, these polymers are susceptible to both thermal and thermooxidative degradation. Reactivity in degradation reactions is especially significant in the case of polyolefins with branched alkyl side groups. For example, thermal decomposition of... 

Some of the most difficult heterophase systems to characterize are those based on hydrocarbon polymers such as mbber-toughened polypropylene or other blends of mbbers and polyolefins. Eecause of its selectivity, RuO staining has been found to be usehil in these cases (221,222,230). Also, OsO staining of the amorphous blend components has been reported after sorption of double-bond-containing molecules such as 1,7-octadiene (231) or styrene (232). In these cases, the solvent is preferentially sorbed into the amorphous phase, and the reaction with OsO renders contrast between the phases. 

Degradation of polyolefins such as polyethylene, polypropylene, polybutylene, and polybutadiene promoted by metals and other oxidants occurs via an oxidation and a photo-oxidative mechanism, the two being difficult to separate in environmental degradation. The general mechanism common to all these reactions is that shown in equation 9. The reactant radical may be produced by any suitable mechanism from the interaction of air or oxygen with polyolefins (42) to form peroxides, which are subsequentiy decomposed by ultraviolet radiation. These reaction intermediates abstract more hydrogen atoms from the polymer backbone, which is ultimately converted into a polymer with ketone functionahties and degraded by the Norrish mechanisms (eq. 

Polyolefins such as polyethylene and polypropylene contain only C—C and C—H bonds and may be considered as high molecular weight paraffins. Like the simpler paraffins they are somewhat inert and their major chemical reaction is substitution, e.g. halogenation. In addition the branched polyethylenes and the higher polyolefins contain tertiary carbon atoms which are reactive sites for oxidation. Because of this it is necessary to add antioxidants to stabilise the polymers against oxidation Some polyolefins may be cross-linked by peroxides. 

There are two great families of synthetic polymers, those made by addition methods (notably, polyethylene and other polyolefines), in which successive monomers simply become attached to a long chain, and those made by condensation reactions (polyesters, polyamides, etc.) in which a monomer becomes attached to the end of a chain with the generation of a small by-product molecule, such as water. The first sustained programme of research directed specifically to finding new synthetic macromolecules involved mostly condensation reactions and was master-... 

Cyanoacrylate adhesives cure by anionic polymerization. This reaction is catalyzed by weak bases (such as water), so the adhesives are generally stabilized by the inclusion of a weak acid in the formulation. While adhesion of cyanoacrylates to bare metals and many polymers is excellent, bonding to polyolefins requires a surface modifying primer. Solutions of chlorinated polyolefin oligomers, fran-sition metal complexes, and organic bases such as tertiary amines can greatly enhance cyanoacrylate adhesion to these surfaces [72]. The solvent is a critical component of these primers, as solvent swelling of the surface facilitates inter-... 

Blends based on polyolefins have been compatibilized by reactive extrusion where functionalized polyolefins are used to form copolymers that bridge the phases. Maleic anhydride modified polyolefins and acrylic acid modified polyolefins are the commonly used modified polymers used as the compatibilizer in polyolefin-polyamide systems. The chemical reaction involved in the formation of block copolymers by the reaction of the amine end group on nylon and anhydride groups or carboxylic groups on modified polyolefins is shown in Scheme 1. 

In addition, there are many surface modification processes that use triplet sensitizers to permit oxidation reactions. In a typical process, polyisocyanate is applied on a polyolefin together with a sensitizer such as benzo-phenone and then irradiated with UV light. As shown in Eq. (15) the sensitizer has an oxidizing effect to produce hydroxyl groups over the polymer surface. These hydroxyl groups finally react with isocyanate to provide a functional polymer [56,57]. 

Major fiber-making polymers are those of polyesters, polyamides (nylons), polyacrylics, and polyolefins. Polyesters and polyamides are produced by step polymerization reactions, while polyacrylics and polyolefins are synthesized by chain-addition polymerization. 

However, Pacansky and his coworkers77 studied the degradation of poly(2-methyl-l-pentene sulfone) by electron beams and from infrared studies of the products suggest another mechanism. They claim that S02 was exclusively produced at low doses with no concomitant formation of the olefin. The residual polymer was considered to be essentially pure poly(2-methyl-l-pentene) and this polyolefin underwent depolymerization after further irradiation. However, the high yield of S02 requires the assumption of a chain reaction and it is difficult to think of a chain reaction which will form S02 and no olefin. 

---