Differential scanning calorimetry poly

The thermal glass-transition temperatures of poly(vinyl acetal)s can be determined by dynamic mechanical analysis, differential scanning calorimetry, and nmr techniques (31). The thermal glass-transition temperature of poly(vinyl acetal) resins prepared from aliphatic aldehydes can be estimated from empirical relationships such as equation 1 where OH and OAc are the weight percent of vinyl alcohol and vinyl acetate units and C is the number of carbons in the chain derived from the aldehyde. The symbols with subscripts are the corresponding values for a standard (s) resin with known parameters (32). The formula accurately predicts that resin T increases as vinyl alcohol content increases, and decreases as vinyl acetate content and aldehyde carbon chain length increases. 

ADMET polymers are easily characterized using common analysis techniques, including nuclear magnetic resonance ( H and 13C NMR), infrared (IR) spectra, elemental analysis, gel permeation chromatography (GPC), vapor pressure osmometry (VPO), membrane osmometry (MO), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The preparation of poly(l-octenylene) (10) via the metathesis of 1,9-decadiene (9) is an excellent model polymerization to study ADMET, since the monomer is readily available and the polymer is well known.21 The NMR characterization data (Fig. 8.9) for the hydrogenated versions of poly(l-octenylene) illustrate the clean and selective nature of ADMET. 

Figure 10.7 The phase diagram (a) and the glass transition temperatures (b) of a PSC/PVME mixture obtained, respectively, by light scattering and differential scanning calorimetry (DSC). Irradiation experiments were performed in the miscible region at 127 C indicated by (X) in the figure of trans-cinnamic acid-labeled polystyrene/poly(vinyl methyl ether) blends.

Thermal Analysis - Differential Scanning Calorimetry (DSC) and thermal gravimetric analysis (TGA) were used to characterize the thermal properties of the polymers synthesized. DSC analysis was performed on a Perkin-Elmer Differential Scanning Calorimeter, Model 2C with a thermal analysis data station. Thermal gravimetric analysis (TGA) was carried out on a DuPont thermal gravimeter, Model 951. From the DSC and TGA plots of poly (N-pheny 1-3,4-dimethylene-... 

Figure 15. Differential Scanning Calorimetry (DSC) curve of 90% trans-i, 4-poly butadiene...

Block copolymers with PS and a polymethacrylate block carrying a liquid crystalline group, PS-b-poly 6-[4-(cyanophenylazo)phenoxy]hexyl methacrylate, were successfully prepared in quantitative yields and with relatively narrow molecular weight distributions (Scheme 5) [18]. The thermotropic liquid crystalline behavior of the copolymers was studied by differential scanning calorimetry. 

AFM Atomic force microscopy aPP Atactic polypropylene DSC Differential scanning calorimetry HDPE High-density polyethylene iPP Isotactic polypropylene LLDPE Linear low-density polyethylene MD Microdomain ODT Order-disorder transition PB Poly(butadiene)... 

There appear to be no reported values for the Tg of poly(TBTM) and it proved difficult to measure any meaningful transition by differential scanning calorimetry. The value of 0°C was selected as It gave a reasonable fit to experimental data when using equations 7 and 8. 

Oxidation of mixtures of 2,6-disubstituted phenols leads to linear poly(arylene oxides). Random copolymers are obtained by oxidizing mixtures of phenols. Block copolymers can be obtained only when redistribution of the first polymer by the second monomer is slower than polymerization of the second monomer. Oxidation of a mixture of 2,6-di-methylphenol (DM ) and 2fi-diphenylphenol (DPP) yields a random copolymer. Oxidation of DPP in the presence of preformed blocks of polymer from DMP produces either a random copolymer or a mixture of DMP homopolymer and extensively randomized copolymer. Oxidation of DMP in the presence of polymer from DPP yields the block copolymer. Polymer structure is determined by a combination of differential scanning calorimetry, selective precipitation from methylene chloride, and NMR spectroscopy. 

Isomerization from cis to trans does not occur with equal ease in all polymers. Qualitatively, the more conjugated poly-n-octylCOT isomerizes more quickly in solution than the less conjugated poly-TMSCOT. Differential scanning calorimetry was performed on all of the polymers (Table HI). 

Figure 18.16. Standard differential scanning calorimetry scan of poly(methyl methacrylate) indicating p relaxation near 40°C and a-relaxation (Tg) near 119°C. Reproduced from DeLapp et al. (2004), by permission of Elsevier, Ltd.

In another study, it was successfully reported an intimate ternary blend system of poly(carbonate) (PC)/poly(methyl methacrylate ) (PMMA)/poly (vinyl acetate) (PVAc) obtained by the simultaneous coalescence of the three guest polymers from their common y-cyclodextrin (y-CD) inclusion complex (IC). The thermal transitions and the homogeneity of the coalesced ternary blend were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) [50]... 

---