Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Poly methyl methacrylate PMMA

EVAL is a poly(vinyl alcohol), a copolymer of ethylene and vinyl alcohol. PMMA = poly(methyl methacrylate). [Pg.35]

MMA methyl methacrylate PMMA poly(methyl methacrylate)... [Pg.2]

Notes Cellulose (Whatman) PTMSP, poly(trimethyl silyl propine) PS, polystyrene PP, polypropylene PE, polyethylene PA 66, polyamide 66 PA 6, polyamide 6 PVP, poly(vinyl pyrrolidone) PPO, poly(2,6-dimetyl-l,4-phenylene oxide) PMMA, poly(methyl methacrylate) PETP, polyethylene terephthalate) Irganox 1010 is a Ciba anti-oxidant. [Pg.471]

PS—polystyrene, PMMA—poly(methyl methacrylate), PMA—poly(methyl acrylate), PDMAEMA—poly((Nd f-dimethylamino)ethyl methacrylate), PDMA—poly( dimethyl-acrylamide), P(t-BA)—poly(tert-butyl acrylate), PAA—poly(acrylic acid), PPFS—poly (pentafluorostyrene), PHFA—poly(heptadecafluorodecyl acrylate)... [Pg.131]

PMMA Poly(methyl methacrylate) (7H, R6hm) Co-hydrophob... [Pg.188]

PS (polystyrene), PVC [poly(vinyl chloride)], PC (bisphenol A polycarbonate) PMMA [poly (methyl methacrylate)], PB (polybutadiene), SAN (styrene-acrylonitrile copolymer),NBR (acrylonitrile-butadiene rubber), PPE (polyphenylene ether), SBR (styrene-butadiene rubber)... [Pg.366]

Copolymerization reaction initiated by -radiation. PVA, poly (vinyl acetate) PAN, polyacrylonitrile PMMA, poly (methyl methacrylate). [Pg.346]

Whereas UL 94 delivers only a classification based on a pass-and-fail system, LOI can be used to rank and compare the flammability behavior of different materials. In Figure 15.2 the increasing LOI values are presented for different polymers as an example POM = poly(oxymethylene), PEO = poly(ethyl oxide), PMMA = poly(methyl methacrylate), PE = polyethylene), PP, ABS, PS, PET = polyethylene terephthalate), PVA = poly(vinyl alcohol), PBT, PA = poly(amide), PC, PPO = poly(phenylene oxide), PSU, PEEK = poly(ether ether ketone), PAEK = poly(aryl ether ketone), PES, PBI = poly(benzimidazole), PEI = poly(ether imide), PVC = poly(vinyl chloride), PBO = poly(aryl ether benzoxazole), PTFE. The higher the LOI, the better is the intrinsic flame retardancy. Apart from rigid PVC, nearly all commodity and technical polymers are flammable. Only a few high-performance polymers are self-extinguishing. Table 15.1 shows an example of how the LOI is used in the development of flame-retarded materials. The flame retardant red phosphorus (Pred) increases... [Pg.391]

See other pages where Poly methyl methacrylate PMMA is mentioned: [Pg.252]    [Pg.835]    [Pg.316]    [Pg.3]    [Pg.568]    [Pg.504]    [Pg.140]    [Pg.104]    [Pg.424]    [Pg.150]    [Pg.686]    [Pg.164]    [Pg.53]    [Pg.126]    [Pg.405]    [Pg.654]    [Pg.19]    [Pg.36]    [Pg.1]    [Pg.3]    [Pg.48]    [Pg.524]    [Pg.344]    [Pg.346]    [Pg.220]    [Pg.298]    [Pg.3]    [Pg.251]    [Pg.3]    [Pg.138]    [Pg.49]    [Pg.132]    [Pg.174]    [Pg.643]   


SEARCH



Methacrylates PMMA)

Methyl methacrylate

PMMA

Poly , PMMA

Poly - methacrylic

Poly methacrylate

Poly methacrylics

Poly methyl methacrylate

Poly(methyl

Poly(methyl methacrylate) (PMMA)-based Nanocomposites

Poly(methyl methacrylate) Polymer (PMMA)

Typical Measurements on Poly(Methyl Methacrylate) (PMMA)

© 2024 chempedia.info