Plastic Quad Flat Package

ECTC Electronic Components and Technology Conference PQFP plastic quad flat package... 

Numerous geometrical factors of the specific interconnection will also influence anisotropic adhesive formulation and processing, including lead planarity, IC pad metallization, and IC test patterns. The planarity of the leads on the substrate and/or device and the compliance of the conductive particles will determine if anisotropically conductive adhesives can be used in a particular application. For systems with large disparities between lead height, no electrical interconnection will be formed, as shown in Fig. 5. Fine-pitch IC packages for surface-mounted applications, such as the plastic quad flat pack (PQFP), often use gullwing leads that olfer much compliance to the joint. Even if the... 

Rigid laminate substrate (with or without soldermask), wire bonds, over-molded Small outline, low profile (1.0 mm), enhanced electrical performance over 2.4 GHz, JEDEC moisture sensitivity level (MSL) 3 Plastic thin fine pitch quad flat no lead package (P-TFQFN), plastic thin shrink small outline no lead package (P-TSSON), and fine-pitch BGA, FBGA (National) Portable applications, flash memory... 

MQFP—Metal Quad Flatpack. Sometimes used to refer to a plastic metric quad flat pack (such as Harris Corporation, Harris sold its semiconductor operations, now known as Intersil Corp.). MQuad, designed by the Olin Corporation, a high thermal dissipation aluminum package available in plastic leaded chip carrier (PLCC) and QFP packages (with 28-300 leads, and clock speeds of 150 MHz) (see Fig. 8.137). 

---