Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Plasma-sprayed oxides

Mantyla, T., Vuoristo, P., and Kettunen, P., Chemical Vapor Deposition of Plasma Sprayed Oxide Coatings, Thin Solid Films, 118(4) 437-444(24Aug. 1984)... [Pg.318]

Haqu, M. et al.. Influence of aqueous aging on surface properties of plasma sprayed oxide coatings, J. Colloid Interf. Sci., 313, 194, 2007. [Pg.918]

Haqu, M Areva, S Rosenholm, JB Mantyla, T. Characterization of water exposed plasma sprayed oxide coating materials using XPS. Applied Surface Science, 2008, 254, 5981-5989. [Pg.123]

Besides the chemical industry, sihcon is used as a powder in the ceramics (qv) industry for the production of sihcon carbide and sihcon nitride parts (see Advanced ceramics). Sihcon powder is also used as an explosive for defense apphcations and in the refractory industry for plasma spraying with other oxide mixtures (see Refractory coatings). [Pg.537]

A multilayer-type structure probably due to cords in the molten zone between single arc sprayed (0.25 MPa) Ni droplets and steel substrate were found in AES point depth profiles [2.158]. That particular arc spraying condition turned out to yield the best adhesion. Plasma-sprayed AI2O3 layers separated from pre-oxidized Ni Substrate had a micrometer-thick NiO layer on the substrate-sided face and micrometer-deep oxide interdiffusion [2.159]. In this work also, AES point depth profiling substantiated technological assumptions about adhesion mechanisms. [Pg.47]

Kesler O, Plasma spray processing of planar solid oxide fuel cells. Mat. Sci. Forum 2007 539-543 1385-1390. [Pg.281]

Gitzhofer F, Boulos M, Heberlein J, Henne R, Ishigaki T, and Yoshida T. Integrated fabrication processes for solid-oxide fuel cells using thermal plasma spray technology. Mater. Res. Soc. Bull. 2000 July 38-42. [Pg.281]

Schiller G, Henne R, and Ruckdaeschel R. Vacuum plasma sprayed protective layers for solid oxide fuel cell application. J. Adv. Mat. 2000 32 3-8. [Pg.281]

Tai L and Lessing PA. Plasma spraying of porous electrodes for a planar solid oxide fuel cell. J. Am. Ceram. Soc. 1991 74 501-504. [Pg.281]

Franco T, HoshiarDin Z, Szabo P, Lang M, and Schiller G. Plasma sprayed diffusion barrier layers based on doped perovskite-type LaCr03 at substrate-anode interface in solid oxide fuel cells. J. Fuel Cell Sci. Technol. 2007 4 406-412. [Pg.281]

Lang M, Franco T, Schiller G, and Wagner N. Electrochemical characterization of vacuum plasma sprayed thin-film solid oxide fuel cells (SOFC) for reduced operating temperatures. J. Appl. Electrochem. 2002 32 871-874. [Pg.281]

Vassen R, Hathiramani D, Mertens J, Haanappel VAC, and Vinke IC. Manufacturing of high performance solid oxide fuel cells (SOFCs) with atmospheric plasma spraying (APS). Surf. Coat. Technol. 2007 202 499-508. [Pg.281]

See other pages where Plasma-sprayed oxides is mentioned: [Pg.298]    [Pg.293]    [Pg.298]    [Pg.293]    [Pg.405]    [Pg.122]    [Pg.116]    [Pg.116]    [Pg.45]    [Pg.45]    [Pg.51]    [Pg.86]    [Pg.403]    [Pg.432]    [Pg.433]    [Pg.951]    [Pg.953]    [Pg.977]    [Pg.1072]    [Pg.249]    [Pg.266]    [Pg.173]    [Pg.45]    [Pg.179]    [Pg.196]    [Pg.45]    [Pg.45]    [Pg.51]    [Pg.218]    [Pg.104]    [Pg.119]    [Pg.143]    [Pg.116]    [Pg.116]    [Pg.86]    [Pg.113]    [Pg.90]   
See also in sourсe #XX -- [ Pg.298 ]



SEARCH



Oxidative plasma

Oxide plasma

Plasma oxidation

Plasma spray

© 2024 chempedia.info