Solid oxide fuel cells performance

Huebner W, Reed DM, and Anderson HU. Solid oxide fuel cell performance studies anode development. In Singhal SC, Dokiya M, editors. Proceedings of the Sixth International Symposium on Solid Oxide Fuel cells (SOFC-VI), Pennington, NJ The Electrochemical Society, 1999 99(19) 503-512. 

Staffell I, (2007c). Review of Solid Oxide Fuel Cell performance. Available from http //www.form-eng.bham.ac.uk/fuelcells/staffell.htm. 

DEVELOPMENT OF SINGLE-CHAMBER SOLID OXIDE FUEL CELLS PERFORMANCE OPTIMIZATION AND MICRO-STACK DESIGNS ... 

Tsai, T. Barnett, S. A. (1997). Effect of LSM-YSZ cathode on thin-electrolyte solid oxide fuel cell performance. Solid State Ionics, Vol. 93, No. 3-4, 0anuary 1997), pp. (207-217), ISSN 0167-2738... 

Tanner, C. W., Fung, K.-Z., and Virkar, A. V. (1997). The effect of porous composite electrode structure on solid oxide fuel cell performance. 1. Theoretical analysis. J Electrochem. Soc 144 21-30. 

M.R., Nelson, D.J., Rancruel, D.F., Hartvigsen, J., and Gemmen, R.S. Jr. (2004) Solid-oxide-fuel-cell performance and durability resolution of the effects of power-conditioning systems and application loads. IEEE Trans. Power Elearon., 19, 1263-1278. 

Kobsiriphat W et al (2010) Nickel- and ruthenium-doped lanthanum chromite anodes effects of nanoscale metal precipitation on solid oxide fuel cell performance. J Electrochem Soc 157 B279... 

Fee DC, Zwick SA, Ackerman JP (1983) Solid oxide fuel cell performance. In Salzano FJ (ed) Proceedings of the conference on high temperature solid oxide electrolytes anion conductors, vol 1. Brookhaven National Laboratory, Upton, New York pp 29-38... 

Ni, M., Leung, M.K.H. Leung, D.Y.C. Parametric study of solid oxide fuel-cell performance. Energy Convers. Manage. 48 (2007), pp. 1525-1535. 

D.C. Fee, S A. Zwick, J.P. Ackerman, Solid Oxide Fuel Cell Performance, in Proc. Conf. High Temperature Solid Oxide Electrolytes, Anion Conductors, F.J. Salzano Ed., Brookhaven National Laboratory, Vol. 1, pp. 29-38 (1983)... 

Experimental data of anode porosity dependence on solid oxide fuel cell performance were taken from [4]. The network has two inlet parameters current density, A/cm, and anode porosity. A 2-5-1 network is the minimum network architecture allowing a reasonable level of relative error (0.3%). The result of the training procedure is shown in Fig. 5.26. The network was tested for three different anode porosities to check the network modeling quality. The network was observed to model the voltage appropriately. 

Experimental data of oxidant composition dependence on solid oxide fuel cell performance were taken from [14]. The network has three inlet parameters current density, A/cm oxygen flow density (ml/min/cm ) and nitrogen flow... 

Performance of an Anode-supported Solid Oxide Fuel Cell in a Mixed-gas Configuration... 

Tsipis EV, Kharton VV (2008) Electrode materials and reaction mechanisms in solid oxide fuel cells A brief review I. Performance-determining factors. J Solid State Electrochem 12 1039-1060 II. Electrochemical behavior vs. materials science aspects, ibid 1367-1391... 

Solid Oxide Fuel Cells Materials Properties and Performance... 

---