Plant Security System

The plant security system has no design requirements associated with safety. 

Align security measures for the computer system with your corporation s Information Asset Protection Policies (lAPP) and coordinate with the building and/or plant security plans. For some systems, strict compliance with specific security requirements mentioned in the lAPP may not be possible given proprietary system limitations. Examples may include unique user identification codes, specified lengths for user identification codes and passwords, or inactivity time-outs. Use a deviation change process to document and justify these situations. 

Establishing and implementing a project security system is a joint responsibility of all parties contractor, Project Manager, C.M.. and plant security. 

When bonding compounded rubber to fabric, for the manufacture of fabric reinforced expansion joints in the chemical plant piping systems, mechanical anchoring between cotton/Nylon/fibre and compounded rubber should be sufficient to ensure good adhesion. Synthetic fibres require treatment with chemical coatings to secure maximum adhesion and bond [8, 9]. 

By using the checklist that follows, the plant or facilities engineer can cite deficiencies in the security system and take action to correct deficiencies (Piper 1988b Pearlman and Cana 1999) ... 

Does the electronic building control system automatically notify fire and police as well as plant security personnel of incidents ... 

Engineered safeguards systems are integrated with the other main and auxiliary systems to protect the plant, its personnel, and the general public. After 2001, security systems were beefed up in the United States and elsewhere to meet the terrorist threat. These latter... 

The physical security system provides physical features to detect, delay, assist response to, and defend against the design basis threat (DBT) for radiological sabotage. The physical security system consists of physical barriers and an intrusion detection system. The details of the physical security system are protected information. The physical security system provides protection for vital equipment and plant persormel. 

Cyber security of industrial plant contfol systems. 

During a station blackout, the security system at some plants locks the powered security restrictive and key-locked doors, that is, they do not fail open, thereby, potentially restricting accident response actions. The plant configuration is not always obvious during special types of accidents such as a station blackout. 

The use of component logic models to build system fault logic has been discussed by several authors for chemical and electrical systems (Powers and Thompkins, 1974 Fussell, 197.S and Powers and Lapp, 1976). In addition, generic sabotage fault trees have been used for some time in the analysis of security concerns for nuclear power plants (NUREG /CR-0809, NUREG/CR. 121,... 

In industrial premises it is also important that the target level values are guaranteed and that the ventilation system operation can be secured so that the process is not violated because of the ventilation. There are many examples where important fans have failed or important components have corroded, causing extensive losses for the company. In many cases the whole production plant has stopped. 

---