Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Phase transitions thermodynamic properties

Thermodynamic. The thermodynamic properties of elemental plutonium have been reviewed (35,40,41,43—46). Thermodynamic properties of sohd and Hquid Pu, and of the transitions between the known phases, are given in Table 5. There are inconsistencies among some of the vapor pressure measurements of Hquid Pu (40,41,43,44). [Pg.195]

Denotes phase transition from liquid to vapor Denotes residual thermodynamic property Denotes a total value of a thermodynamic property V Denotes vapor phase... [Pg.512]

It is of special interest for many applications to consider adsorption of fiuids in matrices in the framework of models which include electrostatic forces. These systems are relevant, for example, to colloidal chemistry. On the other hand, electrodes made of specially treated carbon particles and impregnated by electrolyte solutions are very promising devices for practical applications. Only a few attempts have been undertaken to solve models with electrostatic forces, those have been restricted, moreover, to ionic fiuids with Coulomb interactions. We would hke to mention in advance that it is clear, at present, how to obtain the structural properties of ionic fiuids adsorbed in disordered charged matrices. Other systems with higher-order multipole interactions have not been studied so far. Thermodynamics of these systems, and, in particular, peculiarities of phase transitions, is the issue which is practically unsolved, in spite of its great importance. This part of our chapter is based on recent works from our laboratory [37,38]. [Pg.337]

Nevertheless, previous developments and some of our results prove that the structural properties of several systems with short-range repulsive forces are straightforwardly and sufficiently accurately given by ROZ integral equations. Thermodynamic properties are much more difficult to describe. Reliable tools exist to obtain thermodynamics at high temperatures or for states far from phase transitions. Of particular importance, and far from being solved, are the issues related to phase transitions in partly quenched systems, even for simple models with attractive interactions. It seems that the results obtained by Kierlik et al. [27], may serve as a helpful reference in this direction. [Pg.342]

In a fundamental sense, the miscibility, adhesion, interfacial energies, and morphology developed are all thermodynamically interrelated in a complex way to the interaction forces between the polymers. Miscibility of a polymer blend containing two polymers depends on the mutual solubility of the polymeric components. The blend is termed compatible when the solubility parameter of the two components are close to each other and show a single-phase transition temperature. However, most polymer pairs tend to be immiscible due to differences in their viscoelastic properties, surface-tensions, and intermolecular interactions. According to the terminology, the polymer pairs are incompatible and show separate glass transitions. For many purposes, miscibility in polymer blends is neither required nor de-... [Pg.649]

Thermodynamic, statistical This discipline tries to compute macroscopic properties of materials from more basic structures of matter. These properties are not necessarily static properties as in conventional mechanics. The problems in statistical thermodynamics fall into two categories. First it involves the study of the structure of phenomenological frameworks and the interrelations among observable macroscopic quantities. The secondary category involves the calculations of the actual values of phenomenology parameters such as viscosity or phase transition temperatures from more microscopic parameters. With this technique, understanding general relations requires only a model specified by fairly broad and abstract conditions. Realistically detailed models are not needed to un-... [Pg.644]

An extensive treatment of the thermodynamic properties of second-order phase transitions in magnetic crystals has been given by K. P. Belov, Magnetic Transitions, Consultants Bureau, Enterprises, Inc., New York, 1961. [Pg.759]

Film balance techniques 49 Equilibrium thermodynamic properties 51 n/A curves and phase transitions 54 Dynamic methods 57... [Pg.45]

Now we consider thermodynamic properties of the system described by the Hamiltonian (2.4.5) it is a generalized Hamiltonian of the isotropic Ashkin-Teller model100,101 expressed in terms of interactions between pairs of spins lattice site nm of a square lattice. Hamiltonian (2.4.5) differs from the known one in that it includes not only the contribution from the four-spin interaction (the term with the coefficient J3), but also the anisotropic contribution (the term with the coefficient J2) which accounts for cross interactions of spins a m and s m between neighboring lattice sites. This term is so structured that it vanishes if there are no fluctuation interactions between cr- and s-subsystems. As a result, with sufficiently small coefficients J2, we arrive at a typical phase diagram of the isotropic Ashkin-Teller model,101 102 limited by the plausible values of coefficients in Eq. (2.4.6). At J, > J3, the phase transition line... [Pg.44]

This chapter introduces additional central concepts of thermodynamics and gives an overview of the formal methods that are used to describe single-component systems. The thermodynamic relationships between different phases of a single-component system are described and the basics of phase transitions and phase diagrams are discussed. Formal mathematical descriptions of the properties of ideal and real gases are given in the second part of the chapter, while the last part is devoted to the thermodynamic description of condensed phases. [Pg.29]

In [25, 26] it is shown that at given pq the diquark gap is independent of the isospin chemical potential for Pi ) < Pic(Pq), otherwise vanishes. Increase of isospin asymmetry forces the system to pass a first order phase transition by tunneling through a barrier in the thermodynamic potential (2). Using this property we choose the absolute minimum of the thermodynamic potential (2) between two /3-equilibrium states, one with and one without condensate for the given baryochemical potential Pb = Pu + 2pd-... [Pg.344]

Considering other families of similar compounds, the contributions given by Guillermet and Frisk (1992), Guillermet and Grimvall (1991) (cohesive and thermodynamic properties, atomic average volumes, etc. of nitrides, borides, etc. of transition metals) are other examples of systematic descriptions of selected groups of phases and of the use of special interpolation and extrapolation procedures to predict specific properties. [Pg.311]

A. Reisman, Phase Equilibria, Basic Principles, Applications, and Experimental Techniques, Academic Press, New York, 1970 H. E. Stanley, Introduction to Phase Transitions and Critical Phenomena, Oxford University Press, New York, 1971 J. R. Cunningham and D. K. Jones, eds.. Experimental Results for Phase Equilibria and Pure Component Properties, American Institute of Chemical Engineers, New York, 1991 S. Malanowski, Modelling Phase Equilibria Thermodynamic Background and Practical Tools, Wiley, New York, 1992 J. M. Prausnitz, R. N. Lichtenthaler, and E. G. de Azevedo, Molecular Thermodynamics of Eluid-Phase Equilibria, Prentice-Hall, Upper Saddle River, NJ, 1999. [Pg.529]

Diblock copolymers represent an important and interesting class of polymeric materials, and are being studied at present by quite a large number of research groups. Most of the scientific interest has been devoted to static properties and to the identification of the relevant parameters controlhng thermodynamic properties and thus morphologies [257-260]. All these studies have allowed for improvements to the random phase approximation (RPA) theory first developed by Leibler [261]. In particular, the role of the concentration fluctuations, which occur and accompany the order-disorder transition, is studied [262,263]. [Pg.162]

The excess thermodynamic properties correlated with phase transitions are conveniently described in terms of a macroscopic order parameter Q. Formal relations between Q and the excess thermodynamic properties associated with a transition are conveniently derived by expanding the Gibbs free energy of transition in terms of a Landau potential ... [Pg.109]

We have already stated that the a-[3 transition of quartz may be described as a A transition overlapping a first-order transition. The heat capacity function for the two polymorphs is thus different in the two stability fields, and discontinuities are observed in the H and S values of the phase at transition temperature T rans cf section 2.8). For instance, to calculate the thermodynamic properties of ]8-quartz at T = 1000 K and P = bar, we... [Pg.373]


See other pages where Phase transitions thermodynamic properties is mentioned: [Pg.10]    [Pg.223]    [Pg.481]    [Pg.358]    [Pg.124]    [Pg.11]    [Pg.11]    [Pg.503]    [Pg.115]    [Pg.82]    [Pg.296]    [Pg.342]    [Pg.84]    [Pg.207]    [Pg.682]    [Pg.331]    [Pg.86]    [Pg.648]    [Pg.586]    [Pg.598]    [Pg.693]    [Pg.142]    [Pg.92]    [Pg.108]    [Pg.303]    [Pg.360]    [Pg.69]    [Pg.77]    [Pg.380]    [Pg.439]    [Pg.894]    [Pg.204]    [Pg.109]    [Pg.278]    [Pg.366]   
See also in sourсe #XX -- [ Pg.317 , Pg.318 , Pg.319 , Pg.320 , Pg.321 , Pg.322 ]




SEARCH



Phase properties

Phase transition property

Phase transitions thermodynamic

Phase transitions, thermodynamics

Properties transitive

Thermodynamic Properties of Liquid Crystal Phase Transitions

Thermodynamic phase

Thermodynamics transitions

Transition properties

Transitivity properties

© 2024 chempedia.info