Particle size nanocomposites

The Fe-B nanocomposite was synthesized by the so-called pillaring technique using layered bentonite clay as the starting material. The detailed procedures were described in our previous study [4]. X-ray diffraction (XRD) analysis revealed that the Fe-B nanocomposite mainly consists of Fc203 (hematite) and Si02 (quartz). The bulk Fe concentration of the Fe-B nanocomposite measured by a JOEL X-ray Reflective Fluorescence spectrometer (Model JSX 3201Z) is 31.8%. The Fe surface atomic concentration of Fe-B nanocomposite determined by an X-ray photoelectron spectrometer (Model PHI5600) is 12.25 (at%). The BET specific surface area is 280 m /g. The particle size determined by a transmission electron microscope (JOEL 2010) is from 20 to 200 nm. 

Core-shell nanocomposite of Mg(OH)2/PMMA with an average particle size of ca. 500nm where Mg(OH)2 is the core and PMMA is the shell was successfidly prepared by the emulsion polymerization of MMA in the presence of surface modified Mj OH)2. The grapelike ( re-shell microspheres with PMMA nodules could he obtained as stable latex. 

While the linear absorption and nonlinear optical properties of certain dendrimer nanocomposites have evolved substantially and show strong potential for future applications, the physical processes governing the emission properties in these systems is a subject of recent high interest. It is still not completely understood how emission in metal nanocomposites originates and how this relates to their (CW) optical spectra. As stated above, the emission properties in bulk metals are very weak. However, there are some processes associated with a small particle size (such as local field enhancement [108], surface effects [29], quantum confinement [109]) which could lead in general to the enhancement of the fluorescence efficiency as compared to bulk metal and make the fluorescence signal well detectable [110, 111]. 

V. Subraniam, E. Wolf, P.V. Kamat, Catalysis with Ti02/gold nanocomposites. Effect of metal particle size on the Fermi level equilibration, J. Am. Chem. Soc. 126 (2004) 4943-4950. 

A polymer electrolyte with acceptable conductivity, mechanical properties and electrochemical stability has yet to be developed and commercialized on a large scale. The main issues which are still to be resolved for a completely successful operation of these materials are the reactivity of their interface with the lithium metal electrode and the decay of their conductivity at temperatures below 70 °C. Croce et al. found an effective approach for reaching both of these goals by dispersing low particle size ceramic powders in the polymer electrolyte bulk. They claimed that this new nanocomposite polymer electrolytes had a very stable lithium electrode interface and an enhanced ionic conductivity at low temperature. combined with good mechanical properties. Fan et al. has also developed a new type of composite electrolyte by dispersing fumed silica into low to moderate molecular weight PEO. 

HREM methods are powerful in the study of nanometre-sized metal particles dispersed on ceramic oxides or any other suitable substrate. In many catalytic processes employing supported metallic catalysts, it has been established that the catalytic properties of some structure-sensitive catalysts are enhanced with a decrease in particle size. For example, the rate of CO decomposition on Pd/mica is shown to increase five-fold when the Pd particle sizes are reduced from 5 to 2 nm. A similar size dependence has been observed for Ni/mica. It is, therefore, necessary to observe the particles at very high resolution, coupled with a small-probe high-precision micro- or nanocomposition analysis and micro- or nanodiffraction where possible. Advanced FE-(S)TEM instruments are particularly effective for composition analysis and diffraction on the nanoscale. ED patterns from particles of diameter of 1 nm or less are now possible. 

The sol-gel method has been extensively used for the preparation of n-metal oxides and organic compounds. The important examples are n-NiO, n-Mn02, n-W03 and n-Fe203 etc. which have homogeneous particles, pore sizes and densities. This method affords easy control over the stoichiometry and homogeneity which is not possible with conventional methods. Further, the materials with special shapes monoliths, fibers, films and powders of uniform and very small particle sizes can also be prepared. The most important attribute of NMs prepared by this method is that they also contain pores of similar dimensions. These pores may be filled with another phase to form a nanocomposite which has proved to be of significant use to the HEMs community [98]. 

FEM has also been used to predict the mechanical properties of PNCs. These studies reasonably reproduced the nanocomposite microstructure (i.e., particle size, amount, and spatial arrangement) and underlined the importance of including an... 

Lin [140, 141]. They employed commercial /w/v-(ethylene-co-vinyl alcohol) and standard proteins as templates, which resulted in much smaller particles sizes (100-200 nm). The authors also introduced quantum dots in the solution, which yielded nanocomposite beads where the binding event could be monitored by measuring the quenching in the quantum dot fluorescence. 

The measurement of residual stresses is usually associated with the analysis of mechanical properties, and not microstructure. However, residual stress fields in nanocomposites depend directly on microstructural parameters (particle size, position and spacing), as well as bulk material properties, such as differences in the coefficient of thermal expansion. 

---