Palladium, isomerism

In a related process, 1,4-dichlorobutene was produced by direct vapor-phase chlorination of butadiene at 160—250°C. The 1,4-dichlorobutenes reacted with aqueous sodium cyanide in the presence of copper catalysts to produce the isomeric 1,4-dicyanobutenes yields were as high as 95% (58). The by-product NaCl could be recovered for reconversion to Na and CI2 via electrolysis. Adiponitrile was produced by the hydrogenation of the dicyanobutenes over a palladium catalyst in either the vapor phase or the Hquid phase (59,60). The yield in either case was 95% or better. This process is no longer practiced by DuPont in favor of the more economically attractive process described below. 

The nickel or cobalt catalyst causes isomerization of the double bond resulting in a mixture of C-19 isomers. The palladium complex catalyst produces only the 9-(10)-carboxystearic acid. The advantage of the hydrocarboxylation over the hydroformylation reaction is it produces the carboxyUc acids in a single step and obviates the oxidation of the aldehydes produced by hydroformylation. 

Pyrazine 1,4-dioxides are available by the direct self-condensation of 1,2-hydroxyaminooximes (70JOC2790). 1,2-Nitrooximes are obtained by the isomerization of alkene initrogen trioxide adducts, which are reduced with palladium on charcoal to the hydroxyaminooximes which undergo acid-catalyzed auto-condensation to the pyrazine 1,4-dioxides (Scheme 19). 

Oxiranes have been isomerized by palladium compounds to allylic alcohols and enones (79JA1623), and to 1,3-diketones (80JA2095). 

The first fraction (bp 30-40 C) contains decenes which are formed by palladium-catalyzed isomerization of l-decene (indicated by a broad signal at 6 5.2-5.5 in the H NMR spectrum). 

The main purpose of this filtration is to remove traces, if any, of palladium-containing compounds that might induce undesirable transformations, such as isomerization and polymerization, during the subsequent distillative workup. 

Normally, the hydrogenation of a readily hydrogenated double bond occurs over palladium-on-charcoal in ethanol at room temperature and atmospheric pressure. The more difficultly reduced olefins require elevated reaction temperatures and/or pressures for the reaction to proceed at a reasonable rate. The saturation of an 8(14)-double bond is virtually impossible under normal hydrogenation conditions. In order to remove unsaturation at this position it is necessary to first isomerize the double bond to the readily hydrogenated 14 position by treatment with dry hydrogen chloride in chloro-form. ° ... 

The Hegedus indole synthesis involves one of the earlier (formal) examples of olefin hydroamination. An ortho-vinyl or ortho-nllyl aniline derivative 1 is treated with palladium(II) to deliver an intermediate resulting from alkene aminopalladation. Subsequent reduction and/or isomerization steps then provide the indoline or indole unit 2, respectively. 

A different type of tautomeric relationship exists between compounds of types 323 and 324. Both types of structure can be isolated, pyridones (324, Z = N—Me) and pyrones (324, Z = 0) being formed when 323 (Z = N—Me or 0) is heated with palladium on charcoal in ethylene glycol. Similar isomerizations in the quinol-4-one series have been reported."... 

Dimethyl-1,2,4-triazolium iodide with palladium acetate yields the carbene adduct 182 (97JOM(530)259). Under water it undergoes cis-trans isomerization to 183. Some other derivatives were reported in 1981 (81BCSJ800). 1,1 -Methylenebis(4-alkyl-l,2,4-triazolium)diiodides (alkyl = /-Pr, n-Bu, octyl) with palladium(II) acetate give the mononuclear complexes [L Pdl ] (99EJIC1965), where L2= l,l -methylenebis(4-R-l,2,4-triazol-2-ylidene) (R = /-Pr, n-Bu, octyl). Thermolysis of the products in THF gives the rran -dinuclear complexes 184... 

Reaction of -picoline with a nickel-alumina catalyst has been reported to give a mixture of four isomeric dimethylbipyridines, one of which has been identified at 6,6 -dimethyl-2,2 -bipyridine. With palladium-on-carbon, 2,4-lutidine was found to be more reactive than pyridine,and the isolated biaryl has been assigned the structure (2). However, some confusion arises from the statement that this... 

Intramolecular cycloadditions of substrates with a cleavable tether have also been realized. Thus esters (37a-37d) provided the structurally interesting tricyclic lactones (38-43). It is interesting to note that the cyclododecenyl system (w = 7) proceeded at room temperature whereas all others required refluxing dioxane. In each case, the stereoselectivity with respect to the tether was excellent. As expected, the cyclohexenyl (n=l) and cycloheptenyl (n = 2) gave the syn adducts (38) and (39) almost exclusively. On the other hand, the cyclooctenyl (n = 3) and cyclododecenyl (n = 7) systems favored the anti adducts (41) and (42) instead. The formation of the endocyclic isomer (39, n=l) in the cyclohexenyl case can be explained by the isomerization of the initial adduct (44), which can not cyclize due to ring-strain, to the other 7t-allyl-Pd intermediate (45) which then ring-closes to (39) (Scheme 2.13) [20]. While the yields may not be spectacular, it is still remarkable that these reactions proceeded as well as they did since the substrates do contain another allylic ester moiety which is known to undergo ionization in the presence of the same palladium catalyst. 

In examination of various disubstituted cyclic olefins, the following decreasing isomerization order was adduced Pd Rh, Ru, Pi > Os > r 84). At 20% conversion of 1-octene to octane, the ratio of isomerization to hydrogenation in isopropanol for various unsupported metals was Pd (2.05), Rh (0.125), Ru (0.121. Pt (0.025), Ir (0.025), Os (0.009) 82). Palladium is used frequently when migration and isomerization are wanted platinum, when they are to be avoided (2J24). 

Another example is the hydrogenation of the homoallylic eompound 4-methyl-3-cyclohexenyl ethyl ether to a mixture of 4-methylcyclohexyl ethyl ether and methylcyclohexane. The extent of hydrogenolysis depends on both the isomerizing and the hydrogenolyzing tendencies of the catalysts. With unsupported metals in ethanol, the percent hydrogenolysis decreased in the order palladium (62.6%), rhodium (23 6%), platinum (7.1%), iridium (3.9%), ruthenium (3.0%) (S3). 

Isomerization of the double bond in allylic alcohols may result in aldehydes or ketones (I07a). The reaction can have synthetic value (8bJ3c). If isomerization is desired, palladium is probably the preferred catalyst, operated best under hydrogen-poor conditions (/47fl). Allylic ethers can be converted to alcohols by isomerization with (Ph3P)3RhCl at pH 2 to the vinyl ether, which undergoes hydrolysis (36a). 

In the direct coupling reaction (Scheme 30), it is presumed that a coordinatively unsaturated 14-electron palladium(o) complex such as bis(triphenylphosphine)palladium(o) serves as the catalytically active species. An oxidative addition of the organic electrophile, RX, to the palladium catalyst generates a 16-electron palladium(n) complex A, which then participates in a transmetalation with the organotin reagent (see A—>B). After facile trans- cis isomerization (see B— C), a reductive elimination releases the primary organic product D and regenerates the catalytically active palladium ) complex. 

The palladium-catalyzed cyclization of compound 138 amply demonstrates the utility of the Stille reaction as a macrocyclization method (see Scheme 37). This efficient ring closure is just one of many examples disclosed by J.E. Baldwin and his group at Oxford.58 Interestingly, compound 138 can be employed as a stereoisomeric mixture of vinylstannanes because both stereoisomers converge on the same cyclized product. To rationalize this result, it was suggested that the configuration of the vinylstannane moiety is conserved in the cyclization, but that the macrocycle resulting from the (Z)-vinylstannane stereoisomer isomerizes to the thermodynamically favored trans product under the reaction condi-... 

Bromo-3//-2-bcnzazepines, e.g. 38, undergo palladium(0)-catalyzed carboalkoxylation with carbon monoxide in the presence of copper(I) iodide and methanol to give mixtures of isomeric methyl esters, e.g. 39 and 40.78 The function of the copper(I) iodide is not understood, but its presence lowers significantly (18 h to 3 h) the reaction time. 

Scheme 2.49 Palladium(0)-catalyzed isomerization of 2-dienylaziridines to 3-pyrrolines.

Palladium(O)-catalyzed isomerization of 2-dienylaziridines 201 to 3-pyrrolines 202 was reported in 1985 by Oshima, Nozaki, and coworkers (Scheme 2.49) [78]. This isomerization is in striking contrast to Ibuka s palladium-catalyzed isomerization of 2,3-trans-2-vinylaziridines to the corresponding 2,3-cis isomers (see Section 2.4.6) [29]. 

Scheme 2.59 Synthesis of L,L-type ( )-alkene dipeptide isosteres 243 through palladium(0)-catalyzed isomerization of vinylaziridines 240.

These ci s-complexes of palladium are unstable and rapidly isomerize but can be made via the ci s-diaqua complex [68]... 

---