Palladium cycloisomerization

SCHEME 7.12 Two distinct catalytic cycles for palladium cycloisomerization. 

In contrast to nickel- and rhodium-catalyzed reactions, palladium cycloisomerizations of 1,6-dienes produce different isomers as the major products [62,63]. Palladium catalysts show a preference on electron-deficient alkenes for the... 

The examples presented in this subchapter represent only a selected portion of the vast amount of literature publications highlighting the ability of cycloisomerization reactions to built structural diversity within the class of sesquiterpenoids. As the reaction mechanisms are refined and more things are currently known not only from palladium cycloisomerization chemistry but also from other unique pi-metals like gold and platinum, more impressive cascades are expected to flourish the chemical literature. Although cycloisomerization reaction is counting more than four decades from its concept discovery, we are convinced that it will stiU remain one of the best atom-economical methods for the construction of structurally comphcated natural products as those contained in the unlimited sesquiterpene family. 

Palladium catalyzed cycloisomerizations of 6-cn-l-ynes lead most readily to five-membered rings. Palladium binds exclusively to terminal C = C triple bonds in the presence of internal ones and induces cyclizations with high chemoselectivity. Synthetically useful bis-exocyclic 1,3-dienes have been obtained in high yields, which can, for example, be applied in Diels-Alder reactions (B.M. Trost, 1989). 

Another useful class of palladium-catalyzed cycloisomerizations is based on the general mechanistic pathway shown in Scheme 13. In this chemistry, a hydridopalladium acetate complex is regarded as the catalytically active species.27b-29 According to this pathway, coordination of a generic enyne such as 59 to the palladium metal center facilitates a hydropalladation reaction to give intermediate 60. With a pendant alkene, 60 can then participate in a ring-form-... 

Although the conversion of 63—>67 adequately expresses the utility of palladium-catalyzed cycloisomerizations for the construction of complex polycycles, the single-step, palladium-mediated conversion of compound 68 to the novel polyspirocycle 6930,31 (Scheme 15) can perhaps be regarded as the paragon of this chemistry. In this striking transformation, chemo- and regioselective... 

Silane reduces the palladium acetate in 119 to the palladium hydride 120, which undergoes reductive elimination to provide the organic product and the catalytic Pd(II) species. This mechanistic hypothesis was supported by the use of EtsSiD as the reductant product was formed with D incorporation at only the methyl group [70]. This reaction is best performed with a Pd(0) precatalyst in the presence of acetic acid and 10 eq. of silane, which suppresses the competitive cycloisomerization reaction [70]. 

The palladium complexes are the catalysts of choice for the cycloisomerization of the bisdienes, 9 which lead to the formation of either five- or six-membered enedienes with frarct-stereorechemistry for the vicinal substituents in the newly formed ring in high yields (Scheme 102).370... 

Trost and others have extensively studied the ruthenium-catalyzed intermolecular Alder-ene reaction (see Section 10.12.3) however, conditions developed for the intermolecular coupling of alkenes and alkynes failed to lead to intramolecular cycloisomerization due the sensitivity of the [CpRu(cod)Cl] catalyst system to substitution patterns on the alkene.51 Trost and Toste instead found success using cationic [CpRu(MeCN)3]PF6 41. In contrast to the analogous palladium conditions, this catalyst gives exclusively 1,4-diene cycloisomerization products. The absence of 1,3-dienes supports the suggestion that the ruthenium-catalyzed cycloisomerization of enynes proceeds through a ruthenacycle intermediate (Scheme 11). 

The Alder-ene cyclization of allylic silyl ethers represents a clever use of cycloisomerization chemistry, as the enol ether products can be easily unmasked to yield aldehydes. Palladium-catalyzed cycloisomerization of 1,6- and 1,7-enynes containing an allylic oxygen most often gives rise to 1,3-dienes (see Section 10.12.4.1). However, enynes of type 63 underwent facile Alder-ene cyclization to the corresponding five- or six-membered rings (Equation (40)) using both [CpRu(MeCN)3]PF6 41 and the Cp analog ([Cp Ru(MeCN)3]PF6, 64).53... 

Buchwald and co-workers56 found that ( )-olefins cycloisomerized upon exposure to [Cp2Ti(GO)2] giving exclusively the 1,4-diene Alder-ene products (Equation (46)). In contrast to the palladium conditions developed by Trost (see Section 10.12.4.1), the 1,4-diene is formed exclusively, even from substrates containing a tertiary carbon at the allylic position 75. It was noted, however, that heating the reaction mixture for an extended period of time in some instances led to olefin isomerization, forming 1,3-dienes. The mechanism of this titanium-catalyzed... 

Incorporation of the carboxylic acid group into the substrate also had an effect on the stereochemistry of the Alder-ene products. Trost and Gelling60 observed diastereoselectivity in the palladium-catalyzed cycloisomerization of 1,7-enynes when the reactions were conducted in the presence of A,A-bis(benzylidene)ethylene diamine (BBEDA, Figure 2). They were able to synthesize substituted cyclohexanes possessing vicinal (Equation (53)) and... 

Allenes, while arguably underused in synthesis as a whole, have become popular functionalities in cycloisomerization chemistry and provide access to a wide variety of products. Ruthenium, cobalt, platinum, palladium, rhodium, and iridium catalysts are efficient in the transition metal-catalyzed Alder-ene reactions of allenes. 

An intramolecular palladium-catalyzed cycloisomerization of enyne 170 was used to access the antifungal agent, chokol C (Scheme 43).102 The choice of ligand and catalyst was essential to the efficiency of the Alder-ene reaction. Enone 171 was obtained as a single olefinic isomer resulting from migration of only Ha during the cycloisomerization reaction. 

Kibayashi and co-workers103 implemented the palladium-catalyzed cycloisomerization reaction in a stereoselective total synthesis of enantiomerically pure (+)-streptazolin. The cycloisomerization of enyne 172 to provide diene 173 was remarkably selective when performed in the presence of A,Ar -bis(benzylidene)ethylenediamine (BBEDA) as a ligand and water as a proton source (Scheme 44). 

For selected examples of the cycloisomerization of 1,6-enynes catalyzed by metals other than palladium, see (a) Titanium ... 

Hashmi et al. investigated a number of different transition metals for their ability to catalyze reactions of terminal allenyl ketones of type 96. Whereas with Cu(I) [57, 58] the cycloisomerization known from Rh(I) and Ag(I) was observed (in fact the first observation that copper is also active for cycloisomerizations of allenes), with different sources of Pd(II) the dimer 97 was observed (Scheme 15.25). Under optimized conditions, 97 was the major product. Numerous substituents are tolerated, among them even groups that are known to react also in palladium-catalyzed reactions. Examples of these groups are aryl halides (including iodides ), terminal alkynes, 1,6-diynes, 1,6-enynes and other allenes such as allenylcarbinols. This che-moselectivity might be explained by the mild reaction conditions. 

In 1988, Trost and Tour published the cycloisomerization of an ene-allene using a nickel-chromium catalyst [134]. For example, 211 diastereoselectively led to 212 (Scheme 15.68). In the total synthesis of ( )-petiodial, this nickel-chromium system failed, but a palladium catalyst was successful [135]. 

The first example involving a rhodium catalyst in an ene reaction was reported by Schmitz in 1976. An intramolecular cyclization of a diene occurred to give a pyrrole when exposed to rhodium trichloride in isobutanol (Eq. 2) [15]. Subsequently to this work, Grigg utilized Wilkinson s catalyst to effect a similar cycloisomerization reaction (Eq. 3) [16]. Opplozer and Eurstner showed that a n -allyl-rhodium species could be formed from an allyl carbonate or acetate and intercepted intramolecularly by an alkene to afford 1,4-dienes (Eq. 4). Hydridotetrakis(triphenylphosphine)rhodium(l) proved to be the most efficient catalyst for this particular transformation. A direct comparison was made between this catalyst and palladium bis(dibenzylidene) acetone, in which it was determined that rhodium might offer an additional stereochemical perspective. In the latter case, this type of reaction is typically referred to as a metallo-ene reaction [17]. 

Tab. 8.1 summarizes the various substrates that were subjected to the rhodium-catalyzed reaction using a Rh-dppb catalyst system. Only ds-alkenes were cycloisomerized under these conditions, because the trans-alkenes simply did not react. Moreover, the formation of the y-butyrolactone (Tab. 8.1, entry 8) is significant, because the corresponding palladium-, ruthenium-, and titanium-catalyzed Alder-ene versions of this reaction have not been reported. In each of the precursors shown in Tab. 8.1 (excluding entry 7), a methyl group is attached to the alkene. This leads to cycloisomerization products possessing a terminal alkene, thus avoiding any stereochemical issues. Also,... 

Enamines (cf. 63JCE194, 82T1975,88MI1,08H(75)1849) play an important role in the syntheses under review, both as target substances (see Schemes 16 and 17) and as precursors (see Scheme 9 and following Schemes 19-21). Thus, noble-metal-catalyzed enyne and diene cyclizations have been described (Scheme 19) palladium-catalyzed cycloisomerization of... 

Jt-allyl complex can be generated after cyclization, as suggested by Takacs in a Fe(0)-catalyzed cyclization of polyenes. It also can be preformed if an active functional group is present in the allylic position. The palladium-catalyzed intramolecular cycloisomerization reaction of allylic acetates is an efficient method for constructing five- or six-membered rings [56, 57]. An asymmetric approach to this transformation has been studied and so far only poor enantioselectivity has been achieved (0-20% ee) [58]. Very recently, Zhang et al. also reported a Rh-catalyzed cycloisomerization involving a Jt-allylrhodium intermediate formed from an allylic halide [59]. 

Moreover, following the cycloisomerization reaction, a tandem dimerization reaction is also possible on the same substrates under Pd11, Ag1, and Aura catalysis, leading to different substituted furans (4 or 6) depending on the nature of the catalyst used (Scheme 5.5). Indeed, from compound 3 (Scheme 5.5), palladium(II) catalysis led to a 59% yield of 4, whereas silver(I) and gold(III) catalysis led to furans 5 and 6.41... 

The silver-catalyzed cycloisomerization of allenic carboxylic acids to butenolides was also reported by Marshall and co-workers.329 Starting from the enantiomerically enriched propargyl mesylate 390, palladium-catalyzed hydroxycarbonylation led to the chiral allenecarboxylates 391 which afforded the butenolides 392 upon treatment with silver nitrate (Scheme 114). Unfortunately, partial racemization could not be avoided in this two-step sequence. In a related study, Ma and Shi330 have shown that the combination of Pd(PPh3)4 and Ag2C03 promotes the cyclization of allenecarboxylates to the corresponding butenolides, accompanied by the introduction of aryl or alkenyl groups at C3. 

---