Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cyclizations diene

Table 3.19 lists examples of the preparation of nitrogen-containing heterocycles by RCM. As mentioned in Section 3.2.5.3, free amines can partly deactivate metathesis catalysts. With the highly reactive molybdenum catalyst 1 it is, however, possible to cyclize dienes containing a basic amino group. If the less reactive catalysts 2 or 3 are to be used, protonation or acylation of the amine can be used to reduce their nucleophilicity. This will generally lead to higher yields with smaller amounts of catalyst. [Pg.156]

The copolymerization of nonconjugated dienes with monoolefinic vinyl monomers is also known.Depending upon the comonomer pair and the copolymerization conditions, the product copolymer may contain (1) cyclized units made from sequential addition of both ends of the diene monomer (2) cyclized units made from addition of one end of the diene followed by the monoolefin comonomer or one side of a second diene, followed by the other end of the first diene (3) non-cyclized diene units bearing pendant olefins, and (4) crosslinked dienes formed by incorporation of these pendant olefins into another polymer chain (Scheme 19.1). For symmetrical, nonconjugated dienes, it has been shown that all of the well-known methods of polymerization can be employed to... [Pg.489]

The outcomes of eight-membered ring syntheses by RCM are often very sensitive to the substitution pattern. Gmbbs and coworkers were unable to cyclize dienes 71 and 118 using precatalyst 70 (Figure 2.26). The bulky disubstitution of 118 did not provide enough of a driving force for cyclization, while 71 is likely to adopt a conformation that hinders cyclization (vide supra). [Pg.144]

G. Kaszas, J.E. Puskas, and J.P. Kennedy, Thermoplastic elastomers having isobutylene block and cyclized diene blocks, US Patent 4 910 261, assigned to Edison Polymer Innovation Corp. (EPIC) (Broadview Heights, OH), March 20,1990. [Pg.230]

Conrotatory and disrotatory eoncerted reaetions ean often be distinguished by chemical means. For example, using the results of the previous calculation, predict whether the cyclizations of hexa-2,4-diene will lead to cii or traa.i dimethyl cyclo-butene... [Pg.228]

Palladium catalyzed cycloisomerizations of 6-cn-l-ynes lead most readily to five-membered rings. Palladium binds exclusively to terminal C = C triple bonds in the presence of internal ones and induces cyclizations with high chemoselectivity. Synthetically useful bis-exocyclic 1,3-dienes have been obtained in high yields, which can, for example, be applied in Diels-Alder reactions (B.M. Trost, 1989). [Pg.84]

The achiral triene chain of (a//-rrans-)-3-demethyl-famesic ester as well as its (6-cis-)-isoiner cyclize in the presence of acids to give the decalol derivative with four chirai centres whose relative configuration is well defined (P.A. Stadler, 1957 A. Escherunoser, 1959 W.S. Johnson, 1968, 1976). A monocyclic diene is formed as an intermediate (G. Stork, 1955). With more complicated 1,5-polyenes, such as squalene, oily mixtures of various cycliz-ation products are obtained. The 18,19-glycol of squalene 2,3-oxide, however, cyclized in modest yield with picric acid catalysis to give a complex tetracyclic natural product with nine chiral centres. Picric acid acts as a protic acid of medium strength whose conjugated base is non-nucleophilic. Such acids activate oxygen functions selectively (K.B. Sharpless, 1970). [Pg.91]

The early Escherunoser-Stork results indicated, that stereoselective cyclizations may be achieved, if monocyclic olefins with 1,5-polyene side chains are used as substrates in acid treatment. This assumption has now been justified by many syntheses of polycyclic systems. A typical example synthesis is given with the last reaction. The cyclization of a trideca-3,7-dien-11-ynyl cyclopentenol leads in 70% yield to a 17-acetyl A-norsteroid with correct stereochemistry at all ring junctions. Ozonolysis of ring A and aldol condensation gave dl-progesterone (M.B. Gravestock, 1978 see p. 279f.). [Pg.91]

When butadiene is treated with PdCU the l-chloromethyl-7r-allylpalladium complex 336 (X = Cl) is formed by the chloropalladation. In the presence of nucleophiles, the substituted 7r-methallylpalladium complex 336 (X = nucleophile) is formed(296-299]. In this way, the nucleophile can be introduced at the terminal carbon of conjugated diene systems. For example, a methoxy group is introduced at the terminal carbon of 3,7-dimethyl-I,3,6-octatriene to give 337 as expected, whereas myrcene (338) is converted into the tr-allyl complex 339 after the cyclization[288]. [Pg.66]

An efficient carboannulation proceeds by the reaction of vinylcyclopropane (135) or vinylcyclobutane with aryl halides. The multi-step reaction is explained by insertion of alkene, ring opening, diene formation, formation of the TT-allylpalladium 136 by the readdition of H—Pd—I, and its intramolecular reaction with the nucleophile to give the cyclized product 137[I08]. [Pg.147]

The stereospecific synthesis of an A ring synthon of la-hydroxy vitamin D has been carried out. The ( )-allcene is cyclized to give the (E -c.xo-diene 155, and the (Z)-allcene affords the (Z)-e,xo-diene 156 stereospecifically[125,126]. These results can be understood by the cis addition and syn elimination mechanism. [Pg.150]

In the synthesis of morphine, bis-cyclization of the octahydroisoqtiinolinc precursor 171 by the intramolecular Heck reaction proceeds using palladium trifluoroacetate and 1,2,2,6,6-pentamethylpiperidine (PMP). The insertion of the diene system forms the rr-allylpalladium intermediate 172, which attacks the phenol intramolecularly to form the benzofuran ring (see Section 1.1.1.3). Based on this method, elegant total syntheses of (-)- and (+ )-dihydrocodei-none and (-)- and ( + )-morphine (173) have been achieved[141]. [Pg.153]

In the reaction of aryl and alkenyl halides with 1,3-pentadiene (248), amine and alcohol capture the 7r-allylpalladium intermediate to form 249. In the reactions of o-iodoaniline (250) and o-iodobenzyl alcohol (253) with 1,3-dienes, the amine and benzyl alcohol capture the Tr-allylpalladium intermediates 251 and 254 to give 252 and 255[173-175]. The reaction of o-iodoaniline (250) with 1,4-pen tadiene (256) affords the cyclized product 260 via arylpalladiuni formation, addition to the diene 256 to form 257. palladium migration (elimination of Pd—H and readdition to give 258) to form the Tr-allylpalladium 259, and intramolecular displacement of Tr-allylpalladium with the amine to form 260[176], o-Iodophenol reacts similarly. [Pg.164]

The dienyne 394 undergoes facile polycyclization. Since the neopentylpalla-dium 395 is formed which has no hydrogen /J to the Pd after the insertion of the disubstituted terminal alkene, the cyclopropanation takes place to form the tt-allylpalladium intermediate 396, which is terminated by elimination to form the diene 397(275]. The dienyne 398 undergoes remarkable tandem 6-e. o-dig. 5-cxo-trig. and -exo-trig cyclizations to give the tetracycle 399 exclu-sively(277]. [Pg.181]

The intramolecular coupling of organostannanes is applied to macrolide synthesis. In the zearalenone synthesis, no cyclization was observed between arylstannane and alkenyl iodide. However, intramolecular coupling take.s place between the alkenylstannane and aryl iodide in 706. A similar cyclization is possible by the reaction of the alkenylstannane 707 with enol triflate[579]. The coupling was applied to the preparation of the bicyclic 1,3-diene system 708[580]. [Pg.233]

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. [Pg.423]

COi is another molecule which reacts with conjugated dienes[10,95,96], COt undergoes cyclization with butadiene to give the five- and six-membered lactones 101. 102. and 103, accompanied by the carboxylic esters 104 and 105[97.98], Alkylphosphines such as tricyclohcxyl- and triisopropylphosphine are recommended as ligands. MeCN is a good solvent[99],... [Pg.439]

Depending on the substituents of l,6-enynes, their cyclization leads to 1.2-dialkylidene derivatives (or a 1.3-diene system). For example, cyclization of the 1,6-enyne 50 affords the 1.3-diene system 51[33-35]. Furthermore, the 1.6-enyne 53, which has a terminal alkene, undergoes cyclization with a shift of vinylic hydrogen to generate the 1,3-diene system 54. The carbapenem skeleton 56 has been synthesized based on the cyclization of the functionalized 1,6-enyne 55[36], Similarly, the cyclization of the 1,7-enyne 57 gives a si -mem-bered ring 58 with the 1,3-diene system. [Pg.478]

The mechanism of the PdCh-catalyzed Cope rearrangement has been studied by use of the partially deuterated 1.5-diene 53[46], The coordination of Pd(II) activates the alkene, and cyclization (carbopalladation) takes place to... [Pg.534]

As illustrated in Scheme 8.1, both 2-vinylpyrroles and 3-vinylpyiroles are potential precursors of 4,5,6,7-tetrahydroindolcs via Diels-Alder cyclizations. Vinylpyrroles are relatively reactive dienes. However, they are also rather sensitive compounds and this has tended to restrict their synthetic application. While l-methyl-2-vinylpyrrole gives a good yield of an indole with dimethyl acetylenedicarboxylate, ot-substitiients on the vinyl group result in direct electrophilic attack at C5 of the pyrrole ring. This has been attributed to the stenc restriction on access to the necessary cisoid conformation of the 2-vinyl substituent[l]. [Pg.84]

Myrcene with its conjugated diene system readily undergoes Diels-Alder reactions with a number of dienophiles. For example, reaction with 3-meth.5i-3-pentene-2-one with a catalytic amount of AlCl gives an intermediate monocyclic ketone, which when cyclized with 85% phosphoric acid produces the bicycHc ketone known as Iso E Super [54464-57-2] (49). The product is useful in providing sandalwood-like and cedarwood-like fragrance ingredients (91). [Pg.417]

Buta-1,3-diene, 1 -(2 -furyl)-pyrolysis, 4, 600 Buta-1,3-diene, 1-mercapto-thiophenes from, 4, 887 Buta-1,3-diene, 1 -(1 -methyl-2-pyrrolyl)-thermal cyclization, 4, 285 Buta-1,3-diene, l-(2-thienyl)-electrocyclization, 4, 748 Butadienes... [Pg.572]


See other pages where Cyclizations diene is mentioned: [Pg.328]    [Pg.159]    [Pg.68]    [Pg.3547]    [Pg.18]    [Pg.7]    [Pg.182]    [Pg.18]    [Pg.77]    [Pg.161]    [Pg.3546]    [Pg.350]    [Pg.602]    [Pg.328]    [Pg.159]    [Pg.68]    [Pg.3547]    [Pg.18]    [Pg.7]    [Pg.182]    [Pg.18]    [Pg.77]    [Pg.161]    [Pg.3546]    [Pg.350]    [Pg.602]    [Pg.39]    [Pg.299]    [Pg.427]    [Pg.480]    [Pg.482]    [Pg.516]    [Pg.534]    [Pg.133]    [Pg.433]    [Pg.434]    [Pg.438]    [Pg.442]   
See also in sourсe #XX -- [ Pg.223 ]

See also in sourсe #XX -- [ Pg.223 ]




SEARCH



Diene cyclization

Dienes cyclization

© 2024 chempedia.info