Palladium complexes carboxylates

Palladium complexes also catalyze the carbonylation of halides. Aryl (see 13-13), vinylic, benzylic, and allylic halides (especially iodides) can be converted to carboxylic esters with CO, an alcohol or alkoxide, and a palladium complex. Similar reactivity was reported with vinyl triflates. Use of an amine instead of the alcohol or alkoxide leads to an amide. Reaction with an amine, AJBN, CO, and a tetraalkyltin catalyst also leads to an amide. Similar reaction with an alcohol, under Xe irradiation, leads to the ester. Benzylic and allylic halides were converted to carboxylic acids electrocatalytically, with CO and a cobalt imine complex. Vinylic halides were similarly converted with CO and nickel cyanide, under phase-transfer conditions. ... 

Recently, great advancement has been made in the use of air and oxygen as the oxidant for the oxidation of alcohols in aqueous media. Both transition-metal catalysts and organocatalysts have been developed. Complexes of various transition-metals such as cobalt,31 copper [Cu(I) and Cu(II)],32 Fe(III),33 Co/Mn/Br-system,34 Ru(III and IV),35 and V0P04 2H20,36 have been used to catalyze aerobic oxidations of alcohols. Cu(I) complex-based catalytic aerobic oxidations provide a model of copper(I)-containing oxidase in nature.37 Palladium complexes such as water-soluble Pd-bathophenanthroline are selective catalysts for aerobic oxidation of a wide range of alcohols to aldehydes, ketones, and carboxylic acids in a biphasic... 

Few other examples of such reaction sequences have been described to date. Oh has reported the palladium-catalyzed reductive cyclizations of 1,6-enynes in the presence of formic acid or triethylsilane via an alkylpalladium intermediate and its application to organic synthesis. Palladium complexes also catalyze the conversion of a range of enynes to cyclic 6,7-unsaturated carboxylic acids in the presence of CO.260... 

In a slightly less convenient procedure, but one which has general versatility, carbonylation of aryl (or vinyl) palladium compounds produces aryl, heteroaryl, and vinyl carboxylic acids. As with the other procedures, immediate upon its formation, the carboxylate anion migrates to the aqueous phase. Consequently, haloaromatic acids can be obtained from dihaloarenes, without further reaction of the second halogen atom, e.g. 1,4-dibromobenzene has been carbonylated (90% conversion) to yield 4-bromobenzoic acid with a selectivity for the monocarbonylation product of 95%. Additionally, the process is economically attractive, as the organic phase containing the catalyst can be cycled with virtually no loss of activity and ca. 4000 moles of acid can be produced for each mole of the palladium complex used [4],... 

Oxidative addition involving carbon-to-oxygen bonds is of relevance to the catalysis with palladium complexes. The most reactive carbon-oxygen bond is that between allylic fragments and carboxylates. The reaction starts with a palladium zero complex and the product is a ir-allylic palladium(II) carboxylate Figure 2.16. 

The reaction starts with an oxidative addition of an allylic compound to palladium(O) and a Tt-allyl-palladium complex forms. Carboxylates, allyl halides, etc. can be used. In practice one often starts with divalent palladium sources, which require in situ reduction. This reduction can take place in several ways, it may involve the alkene, the nucleophile, or the phosphine ligand added. One can start from zerovalent palladium complexes, but very stable palladium(O) complexes may also require an incubation period. Good starting materials are the 7t-allyl-palladium intermediates ... 

Metallic groups as in case (c) lead to electrophilic or even carbocation-like carbene complexes. Typical examples are Fischer-type carbene complexes [e.g. (CO)5Cr=C(Ph)OMe] and the highly reactive carbene complexes resulting from the reaction of rhodium(II) and palladium(II) carboxylates with diazoalkanes. Also platinum ylides [1,2], resulting from the reaction of diazoalkanes with platinum(Il) complexes, have a strong Pt-C o bond but only a weak Pt-C 7t bond. In situation (d) the interaction between the metal and the carbene is very weak, and highly reactive complexes showing carbene-like behavior result. Similar to uncomplexed carbenes. 

The transition metal-catalyzed cyclopropanation of alkenes is one of the most efficient methods for the preparation of cyclopropanes. In 1959 Dull and Abend reported [617] their finding that treatment of ketene diethylacetal with diazomethane in the presence of catalytic amounts of copper(I) bromide leads to the formation of cyclopropanone diethylacetal. The same year Wittig described the cyclopropanation of cyclohexene with diazomethane and zinc(II) iodide [494]. Since then many variations and improvements of this reaction have been reported. Today a large number of transition metal complexes are known which react with diazoalkanes or other carbene precursors to yield intermediates capable of cyclopropanating olefins (Figure 3.32). However, from the commonly used catalysts of this type (rhodium(II) or palladium(II) carboxylates, copper salts) no carbene complexes have yet been identified spectroscopically. 

The linear telomerization reaction of dienes was one of the very first processes catalyzed by water soluble phosphine complexes in aqueous media [7,8]. The reaction itself is the dimerization of a diene coupled with a simultaneous nucleophilic addition of HX (water, alcohols, amines, carboxylic acids, active methylene compounds, etc.) (Scheme 7.3). It is catalyzed by nickel- and palladium complexes of which palladium catalysts are substantially more active. In organic solutions [Pd(OAc)2] + PPhs gives the simplest catalyst combination and Ni/IPPTS and Pd/TPPTS were suggested for mnning the telomerizations in aqueous/organic biphasic systems [7]. An aqueous solvent would seem a straightforward choice for telomerization of dienes with water (the so-called hydrodimerization). In fact, the possibility of separation of the products and the catalyst without a need for distillation is a more important reason in this case, too. 

Arylzinc species prepared via the sacrificial anode process and from aryl halides in the presence of a nickel 2,2 -bipyridine, as already reported in Section . .1, were found totally unreactive towards common electrophiles such as aldehydes, carboxylic anhydrides or activated alkyl halides. However, they react with some electrophiles when they are activated by the presence of a catalytic amount of copper salts (10 mol% Cul) together with tetramethylethylene diamine (1MEDA) as described by Knochel and Singer on the ArZnX—CuCN metal exchange47 or when the reaction is catalyzed by palladium complex. 

If the reaction mixture also contains a nucleophile, then the acyl-palladium complex might undergo displacement of the metal, which usually leads to the formation of a carboxylic acid derivative. The side product in this process is a palladium(II) complex that undergoes reductive elimination to regenerate the catalytically active palladium(O) complex. 

The fate of the acyl palladium complex depends on the circumstances. In the presence of a suitable nucleophile (alcohol, amine) it is converted into the corresponding carboxylic acid derivative. The side product, a palladium hydride is converted to the active form of the catalyst in a reductive elimination step, resulting in the formation of an equimolar amount of acid, which is quenched by an added base (in most cases the excess of the nucleophile). 

Highly selective transformation of terminal acetylenes to either linear or branched carboxylic acids or esters may be achieved by appropriately selected catalyst systems. Branched esters are formed with high selectivity when the acetylenes are reacted with 1-butanol by the catalyst system Pd(dba)2/PPh3/TsOH (dba = dibenzylideneacetone) or palladium complexes containing PPh3. Pd(acac)2 in combination with various N- and O-containing phosphines and methanesulfonic acid is also an efficient catalyst for the alkoxycarbonylation of 1-alkynes to yield the branched product with almost complete selectivity.307,308... 

Catalytic systems to afford linear esters selectively are scant.306,309 A report in 1995 disclosed that palladium complexes based on l,l -bis(diphenylphosphine)fer-rocene showed excellent regioselectivity for the formation of linear a,p-unsaturated esters.309 The results with phenylacetylene are remarkable because this compound is known to exhibit a distinct preference for the formation of the branched products on palladium-catalyzed carboxylations. Mechanistic studies indicate that the alkoxycarbonylation of alkynes proceeds via the protonation of a Pd(0)-alkyne species to give a Pd-vinyl complex, followed by CO insertion and alcoholysis.310... 

In a related manner, sodium 2-bromobenzoates have been converted into 2-allylbenzoic acids. A palladium-catalyzed cyclization involving nucleophilic attack of the carboxylate on the palladium-complexed alkene yielded an isocoumarin. However, in situ catalytic hydrogenation results in the formation of an isochroman-l-one. 

Dicarboxylic acids form monomeric complexes with palladium(II), K2[Pd(X2)2] (X2 = oxalate, malonate, etc,).153154 They may be prepared by warming a suspension of palladium(II) chloride with a concentrated solution of the alkali metal dicarboxylate or by using other palladium complexes containing readily substituted ligands such as [Pd(OH)2], [Pd(N03)2(H20)2] or [Pd(02CMe)2]3-155 These complexes are claimed to have useful antitumour properties.155 Complexes [Pd(X2)L2] (X2 = dicarboxylate L = amine or L2 = diamine) may be prepared by reaction of the dichloro complex with a carboxylate salt.156,128... 

Allyl esters, carbonates, and carbamates readily undergo C-O bond cleavage upon reaction with palladium(O) to yield allyl palladium(II) complexes. These complexes are electrophilic and can react with nucleophiles to form products of allylic nucleophilic substitution. Linkers based on this reaction have been designed, which are cleavable by treatment with catalytic amounts of palladium complexes [165,166], For the immobilization of carboxylic acids, support-bound allyl alcohols have proven suitable (Figure 3.12, Table 3.7). 

Esters of allylic alcohols with resin-bound carboxylic acids can be converted into allyl palladium complexes, which react with carbon nucleophiles and with hydride sources to yield the formally reduced allyl derivatives (Entries 3 and 4, Table 3.47). Alkyl sulfonates have been reduced to alkanes with NaBH4 (Entry 5, Table 3.47). Aryl sulfonates (Entry 6, Table 3.47) and aryl perfluoroalkylsulfonates [814] can be reduced to alkanes by treatment with catalytic amounts of Pd(II) and formic acid as a hydride source. 

Palladium (II)-Nucleophile Addition across Olefins. Adding palladium complexes to olefins, either in the presence of an external nucleophile or a ligand which is attached to palladium, produces a palladium-carbon sigma-bonded complex which is not usually isolated in the case of monoolefins. Instead it decomposes and in doing so oxidizes the olefin to an organic carbonyl compound or a vinyl compound, exchanges a substituent group on the olefin, isomerizes the double bond, arylates (alkylates) the olefin, or carboxylates the olefin (2, 3). 

Non-oxidative hydrocarboxylation of alkenes to carboxylic acids with CO and H20 is catalyzed by palladium complexes such as PdCl2(PhCN)2 or PdCl2(PPh3)2, and a-methyl acids predominate in the presence of HC1.374,443 A recent improvement of this reaction consisted of the use of a PdCl2/CuCl2/HCl catalyst under oxidative conditions.377 Almost quantitative yields of a-methyl carboxylic acids and dicarboxylic acids were obtained from terminal alkenes and terminal dialkenes respectively, at room temperature and atmospheric pressure (equation 174).377... 

It is reasonable to assume that the identical complex will be generated whether it be done stoichiometrically from an alkene, to give a chloride or carboxylate dimer followed by the addition of 2 equiv. of a phosphine per Pd, or by the addition of an allyl-X compound to give a phosphine-Pd0 complex. This assumption is supported by the fact that complexes generated in either manner have been found to exhibit identical reaction profiles.380 Furthermore, for the vast majority of allylpalladium reactions studied, it is most likely that the reactive species is a cationic bisphosphine-palladium complex (13).13 Calculations... 

The third reaction was related to the hydrocarboxylation of allenes with C02, catalyzed by a tridendate silyl pincer-type palladium complex [108]. In this reaction, a a-allyl palladium species (via hydropallation of allene) was formed, and its trigonal bipyramidal geometry allowed the facile coordination of C02 (presumably in a side-on fashion) and a following nucleophilic addition to realize the carboxylation of allene (Figure 4.16). This reaction proved to be very attractive not only as a C02 fixation reaction, but also as a general method for the synthesis of Py-unsaturated carboxylic acids. 

The reaction sequence in the vinylation of aromatic halides and vinyl halides, i.e. the Heck reaction, is oxidative addition of the alkyl halide to a zerovalent palladium complex, then insertion of an alkene and completed by /3-hydride elimination and HX elimination. Initially though, C-H activation of a C-H alkene bond had also been taken into consideration. Although the Heck reaction reduces the formation of salt by-products by half compared with cross-coupling reactions, salts are still formed in stoichiometric amounts. Further reduction of salt production by a proper choice of aryl precursors has been reported (Chapter III.2.1) [1]. In these examples aromatic carboxylic anhydrides were used instead of halides and the co-produced acid can be recycled and one molecule of carbon monoxide is sacrificed. Catalytic activation of aromatic C-H bonds and subsequent insertion of alkenes leads to new C-C bond formation without production of halide salt byproducts, as shown in Scheme 1. When the hydroarylation reaction is performed with alkynes one obtains arylalkenes, the products of the Heck reaction, which now are synthesized without the co-production of salts. No reoxidation of the metal is required, because palladium(II) is regenerated. 

Kaneda et al. [33,34] have recently utilized acid-base interactions to non-covalently attach diphenylphosphine-4-benzoic acid palladium complexes to the exterior of poly(propyleneimine) dendrimers and to cavities within these dendrimers (Fig. 9) via the interaction of the benzoic acid with the carboxyl groups of amide moieties positioned within the dendrimer. Interestingly, the supramolecular dendritic catalyst gave rise to much more active catalysts for... 

---