Palladium aryl halides

In the original process using tin amides, transmetallation formed the amido intermediate. However, this synthetic method is outdated and the transfer of amides from tin to palladium will not be discussed. In the tin-free processes, reaction of palladium aryl halide complexes with amine and base generates palladium amide intermediates. One pathway for generation of the amido complex from amine and base would be reaction of the metal complex with the small concentration of amide that is present in the reaction mixtures. This pathway seems unlikely considering the two directly observed alternative pathways discussed below and the absence of benzyne and radical nucleophilic aromatic substitution products that would be generated from the reaction of alkali amide with aryl halides. 

The mechanism of palladium/aryl halide amination is very closely related to that of cross coupling, with displacement of the halide on palladium (or copper or nickel) by an amine or A-anion instead of the trans-metallation step. In the case of Cu and Ni catalysis, it may proceed through M(0)-M(11) or M(l)-M(lll) cycles. 

They have also developed a route to 2-allenylindole derivatives (98T13929). When prop-2-ynyl carbonates (76) are reacted with 73 in the presence of palladium catalyst, a cross-coupling reaction occurs to give 77a (46%) and 77b (45%). Under a pressurized carbon monoxide atmosphere (10 atm), the palladium-catalyzed reaction of 73 with 78 provides 79a (60%) and 79b (60%) (2000H2201). In a similar reaction, when the substrate is changed to aryl halides (80), 2-aryl-1-methoxyindoles such as 81a (70%) and 81b (60%) are prepared (97H2309). 

This reaction is not a bona fide Heck reaction per se for two reasons (a) the starting material underwent a Hg Pd transmetallation first rather than the oxidative addition of an aryl halide or triflate to palladium(O) (b) instead of undergoing a elimination step to give an enone, transformation 134 136... 

The mechanism of action of the cyanation reaction is considered to progress as follows an oxidative addition reaction occurs between the aryl halide and a palladium(O) species to form an arylpalladium halide complex which then undergoes a ligand exchange reaction with CuCN thus transforming to an arylpalladium cyanide. Reductive elimination of the arylpalladium cyanide then gives the aryl cyanide. 

Traditionally, the synthesis of symmetrical biaryls was routinely accomplished using the Ullmann reaction. Recently, palladium-catalyzed homocoupling of aryl halides has also been demonstrated to rival the utility of the Ullmann coupling. As illustrated in Scheme 21, using Pd(OAc)2 as the... 

Closely related to the Heck reaction is the Sonogashira reaction i.e. the palladium-catalyzed cross-coupling of a vinyl or aryl halide 20 and a terminal alkyne 21 ... 

Harrwig and Bnchwidd have developed a new methodology for aryladon of amines or phenols with aryl halides and palladium catiilysts This reacdon provides a very useful strategy for the preparadon of various heterocyclic compounds such as phenazines, as shown in Scheme... 

The electrophilic character of the palladium atom in the complexes formed by oxidative addition of aryl halides and alkenyl halides to palladium(o) complexes can be exploited in useful ways. 

Carbon-carbon bond formation reactions and the CH activation of methane are another example where NHC complexes have been used successfully in catalytic applications. Palladium-catalysed reactions include Heck-type reactions, especially the Mizoroki-Heck reaction itself [171-175], and various cross-coupling reactions [176-182]. They have also been found useful for related reactions like the Sonogashira coupling [183-185] or the Buchwald-Hartwig amination [186-189]. The reactions are similar concerning the first step of the catalytic cycle, the oxidative addition of aryl halides to palladium(O) species. This is facilitated by electron-donating substituents and therefore the development of highly active catalysts has focussed on NHC complexes. 

Palladium-catalyzed aminations of aryl halides is now a well-documented process [86-88], Heo et al. showed that amino-substituted 2-pyridones 54 and 55 can be prepared in a two-step procedure via a microwave-assisted Buchwald-Hartwig amination reaction of 5- or 6-bromo-2-benzyloxypyri-dines 50 and 51 followed by a hydrogenolysis of the benzyl ether 52 and 53, as outlined in Fig. 9 [89]. The actual microwave-assisted Buchwald-Hartwig coupling was not performed directly at the 2-pyridone scaffold, but instead at the intermediate pyridine. Initially, the reaction was performed at 150 °C for 10 min with Pd2(dba)3 as the palladium source, which provided both the desired amino-pyridines (65% yield) as well as the debrominated pyridine. After improving the conditions, the best temperature and time to use proved... 

The palladium(O) complex undergoes first an oxydative addition of the aryl halide. Then a substitution reaction of the halide anion by the amine occurs at the metal. The resulting amino-complex would lose the imine with simultaneous formation of an hydropalladium. A reductive elimination from this 18-electrons complex would give the aromatic hydrocarbon and regenerate at the same time the initial catalyst. 

If, instead of a palladium catalyst, a nickel catalyst, such as the bipyridylnickel(II) bromide, is used for the arylation of amines (Fig. 7), the reduction of the aryl halide into the corresponding aromatic hydrocarbon is still present for the primary or secondary benzylamines but, the arylation into substituted anilines is the main reaction even most often the only one, for the other types of amines. 

The reaction of amines with aryl halides requires a catalyst in most cases to initiate the reaction. There are several approaches that result in N-aryl amines. Treatment of cyclohexylamine with p-MeC6H4B(OH)2 and Cu(OAc)2 gave the N-aryl amide in 63% yield. Aryl halides react with amines in the presence of palladium... 

Alkenylboranes (R2C=CHBZ2 Z — various groups) couple in high yields with vinylic, alkynyl, aryl, benzylic, and allylic halides in the presence of tetra-kis(triphenylphosphine)palladium, Pd(PPh3)4, and a base to give R C CHR. 9-Alkyl-9-BBN compounds (p. 1013) also couple with vinylic and aryl halides " as well as with a-halo ketones, nitriles, and esters.Aryl halides couple with ArB(IR2 ) species with a palladium catalyst. ... 

This reaction is similar to 13-1 and, like that one, generally requires activated substrates. With unactivated substrates, side reactions predominate, though aryl methyl ethers have been prepared from unactivated chlorides by treatment with MeO in HMPA. This reaction gives better yields than 13-1 and is used more often. A good solvent is liquid ammonia. The compound NaOMe reacted with o- and p-fluoronitrobenzenes 10 times faster in NH3 at — 70°C than in MeOH. Phase-transfer catalysis has also been used. The reaction of 4-iodotoluene and 3,4-dimethylphenol, in the presence of a copper catalyst and cesium carbonate, gave the diaryl ether (Ar—O—Ar ). Alcohols were coupled with aryl halides in the presence of palladium catalysts to give the Ar—O—R ether. Nickel catalysts have also been used. ... 

The Suzuki-Miyaura synthesis is one of the most commonly used methods for the formation of carbon-to-carbon bonds [7]. As a palladium catalyst typically tetrakis(triphenylphosphine)palladium(0) has been used, giving yields of44—78%. Recently, Suzuki coupling between aryl halides and phenylboronic acid with efficient catalysis by palladacycles was reported to give yields of 83%. 

In a Kumada-Corriu reaction, an aryl halide is oxidatively coupled with a homogeneous nickel(ll)-phosphine catalyst [2], This species reacts with a Grignard reagent to give biaryl or alkylaryl compounds. Later, palladium-phosphine complexes were also successfully applied. By this means, stereospecific transformations were achieved. 

The mechanism involves a Pd(0) monocoordinate complex as the active species that undergoes oxidative addition to the aryl halide [141]. Thereafter, coordination of the amine to the palladium centre and deprotonation by the external base results in halide abstraction. After reductive elimination, the coupling product is obtained and the catalytic active species regenerated (Scheme 6.45). 

The catalytic activity, however, is generally associated with leaching of the metal into solution, the reaction being most likely catalyzed by soluble active Pd species. Palladium leaching is generally caused by oxidative attack of the aryl halide on the metal nanoparticles, giving catalyt-ically active aryl halide Pd(II) species in solution [30]. 

A closely related reaction that is currently receiving much attention is the palladium-catalysed Suzuki coupling of arylboronic acids with aryl halides (Fu and Littke, 1998). For example, this technology has recently been applied by Clariant workers for the production of o-tolyl-benzonitrile (Eqn. (13)), an intermediate to a series of so-called angiotensin-II antagonists, a new class of antihypertensive drugs (Bernhagen, 1998). 

---