Palladium amine nucleophiles

Allylic amination is important for the solid-phase organic synthesis.15 The solid-phase allylic aminations are devised into the G-N bond formation on solid support and the deprotection of allyl ethers. As a novel deprotection method, the palladium-catalyzed cyclization-cleavage strategy was reported by Brown et al. (Equation (4)).15a,15b The solid-phase synthesis of several pyrrolidines 70 was achieved by using palladium-catalyzed nucleophilic cleavage of allylic linkages of 69. 

Amine nucleophiles appear, in general, to prefer addition to the allyl ligand on the face opposite the palladium.185 195,208,386... 

The reaction proceeds well with unhindered secondary amines as both nucleophiles and bases. The yield of allylic amine formed depends upon how easily palladium hydride elimination occurs from the intermediate. In cases such as the phenylation of 2,4-pentadienoic acid, elimination is very facile and no allylic amines are formed with secondary amine nucleophiles, while phenylation of isoprene in the presence of piperidine gives 29% phenylated diene and 69% phenylated allylic amine (equation 30).84 Arylation occurs at the least-substituted and least-hindered terminal diene carbon and the amine attacks the least-hindered terminal ir-allyl carbon. If one of the terminal ir-allyl carbons is substituted with two methyl groups, however, then amine substitution takes place at this carbon. The reasons for this unexpected result are not clear but perhaps the intermediate reacts in a a- rather than a ir-form and the tertiary center is more accessible to the nucleophile. Primary amines have been used in this reaction also, but yields are only low to moderate.85 A cyclic version occurs with o-iodoaniline and isoprene.85... 

As mentioned earlier, Ding et al.15 captured a number of dichlorohetero-cyclic scaffolds where one chloro atom is prone to nucleophilic aromatic substitution onto resin-bound amine nucleophiles (Fig. 1). Even though it was demonstrated that in many cases the second chlorine may be substituted with SNAr reactions, it was pointed out that palladium-catalyzed reactions offer the most versatility in terms of substrate structure. When introducing amino, aryloxy, and aryl groups, Ding et al.15 reported Pd-catalyzed reactions as a way to overcome the lack of reactivity of chlorine at the purine C2 position and poorly reactive halides on other heterocycles (Fig. 10). 

In the palladium-catalyzed allylic amination reaction, primary and secondary amines can be used as nucleophiles, whereas ammonia does not react. Therefore, many ammonia synthons have been developed, and a variety of protected primary allyl amines can now be prepared using azide, sulphonamide, phthalimide, di-f-butyl iminocarbonate ((Boc)2NLi), and dialkyl A-(rerr-butoxycarbonyl)phosphoramide anions as the nucleophile [20], An example of the use of ((Boc)2NLi) 30 as the amine nucleophile in the palladium-catalyzed allylic amination reaction is shown in Eq. (9). This reaction also illustrates the problem with the regioselectivity in the reaction as a mixture of the products 31-33 are obtained [21]. 

Several reports on the application of the intermolecular arylation of primary alkylamines have appeared. For example, the reaction of primary amines with chloro 1,3 azoles has been used to produce the H-l-antihistaminic norastemizole [153]. As shown in Eq. (32), the palladium chemistry is dictated by the steric properties of the amines. This property creates selectivity that complements the thermal chemistry, which is dictated by amine nucleophilicity. These researchers have also shown that this high selectivity for arylation of primary over secondary amines with catalysts containing BINAP as ligand allows for the rapid assembly of other multiamino-based structures [154]. 

Carbon as well as amine nucleophiles add to vinyloxiranes in a vinylogous sense with palladium(O) catalysis. In all such cases the initial nucleophilic attack on the vinyloxirane probably proceeds as depicted in Scheme 2S, and its success would governed by the usud steric effects. Some useful examples are shown in Table 7. 

Palladium-catalyzed nucleophilic substitution of allylic substrates (Tsuji-Trost coupling) is a most important methodology in organic synthesis and therefore it is no wonder that such reactions have been developed also in aqueous systems. Carbo- and heteronucleophiles have been found to react with allylic acetates or carbonates in aqueous acetonitrile or DMSO, in water or in biphasic mixtures of the latter with butyronitrile or benzonitrile, affording the products of substitution in excellent yields (Scheme 6.19) [7-11,14,45,46], Generally, K2C03 or amines are used as additives, however in some cases the hindered strong base diazabicycloundecene (DBU) proved superior to other bases. 

In the dimerization reaction of butadiene catalyzed by palladium complexes, nucleophiles (YH), such as amines, alcohols, phenols, carboxylic acids 41 4S>, and active methylene compounds 46) are introduced. This reaction can be explained by the attack of these nucleophiles on the jr-allylic complexes formed as intermediates-in the reactions. Takahashi, Shibano, and Hagihara confirmed by using deuterium that the hydrogen of YH migrates to C6 of the dimeric product, probably via the oxidative addition reactions of YH to the palladium species 42). 

Cyclic ethers and amines can be formed with an intramolecular alcohol or amine nucleophile. Stoichiometric palladium can be avoided by using benzoquinone as the stoichiometric oxidant with a catalytic amount of palladium. In this example intramolecular oxypalladation of a diene is followed by attack of an external nucleophile on a jt-allyl complex. 

Many reactions of amines with palladium- and platinum-olefin complexes have been reported. Akermark showed that nucleophiles add to palladium-olefin complexes to generate aminoalkyl complexes, as shown by the example in Equation 11.26. In this case, reactions of a bis-olefin dichloropalladium complex with amines occurs by splitting of the chloro-bridged dimer by the first equivalent of amine to give a neutral olefin-ligated palladium-amine complex that undergoes attack of the coordinated alkene by a second equivalent of amine. The stereochemistry of the amination is cleanly trans. Akermark and Zetterberg isolated and characterized by C NMR spectroscopy the a-alkyl complexes formed by the amination of both cis- and frans-2-butene, and the stereochemistry of the product alkyl complexes results from external attack by amines, as shown in Scheme 11.5. 

Many studies of the addition of nucleophiles to palladium-allyl complexes have been conducted. Hayashi has shown that the additions of stabilized anions, such as malonate anions or amine nucleophiles, to chiral, non-racemic allyl complexes occur with inversion of configuration.Addition of excess phosphine and either diethyl malonate or dimethylamine to a chiral, non-racemic allyl complex results in nucleophilic attack with nearly complete inversion. The reaction with sodium dimethylmalonate is shown at the right of Equation 11.40. In contrast, nonstabilized carbanions such as allyl or phenyl magnesium chloride react with the same Ti -allylpalladium complex with retention of configuration as shown at the left of Equation 11.40. The stereochemistry from reaction of the Grignard reagents likely results from nucleophilic attack at the metal, followed by reductive elimination. 

Studies on the origin of die regioselectivity of these reactions revealed that attack by amines occurred at the more-substituted position, but isomerization of the kinetic branched product to the thermodynamic linear product occurred faster than the catalytic process. As a result, the linear isomer was observed as the final reaction product. However, isomerization of the products formed by reactions of aziridines, hydroxylamines, and hydrazone deriviatives was slower than the catalytic substitution process, and these different relative rates allowed isolation of the branched substitution products. The isomerization process presumably occurs by protonation of the amine to form an ammonium salt that undergoes oxidative addition to palladium, as was observed in the initial allyUc substitution processes that involved allylic ammonium salts as electrophile. Thus, addition of a strong, non-nucleophihc base to the reactions of amine nucleophiles allowed isolation of the branched kinetic product. ... 

Amino acid methyl esters in a slight excess were also used as amine nucleophiles in palladium-catalyzed aminocarbonylation of iodoaUcenes under conventional organic... 

Whereas amine nucleophiles do not readily undergo arylation with reagents 1 under polar conditions, palladium catalysis has been shown to effectively catalyse arylation of secondary amines in the presence of strong bases. An emerging strategy involves Pd(0) and Cu(I) co-catalysed cross coupling of reagents 1 with... 

The two diasteromeric allyliridium-phosphoramidite complexes formed in the allylic 5 2 substitution of /-substituted allylic acetates, benzoates, or carbonates, with amine nucleophiles have been synthesized and characterized by NMR and X-ray diffractions. Kinetic and stereochemical studies using deuterated substrates indicate that the reaction, which occurs with a retention of configuration, proceeds by the mechanism in Scheme 3. This iridium-catalysed reaction is compared to molybdenum- and palladium-catalysed reactions. 

Based on the above-mentioned stereochemistry of the allylation reactions, nucleophiles have been classified into Nu (overall retention group) and Nu (overall inversion group) by the following experiments with the cyclic exo- and ent/n-acetales 12 and 13[25], No Pd-catalyzed reaction takes place with the exo-allylic acetate 12, because attack of Pd(0) from the rear side to form Tr-allyl-palladium is sterically difficult. On the other hand, smooth 7r-allylpalladium complex formation should take place with the endo-sWyWc acetate 13. The Nu -type nucleophiles must attack the 7r-allylic ligand from the endo side 14, namely tram to the exo-oriented Pd, but this is difficult. On the other hand, the attack of the Nu -type nucleophiles is directed to the Pd. and subsequent reductive elimination affords the exo products 15. Thus the allylation reaction of 13 takes place with the Nu nucleophiles (PhZnCl, formate, indenide anion) and no reaction with Nu nucleophiles (malonate. secondary amines, LiP(S)Ph2, cyclopentadienide anion). 

A better method for preparing primary amines is to use the azide synthesis, in which azjde ion, N3, is used for SN2 reaction with a primary or secondary alkyl halide to give an alkyl azide, RN3. Because alkyl azides are not nucleophilic, overalkylation can t occur. Subsequent reduction of the alkyl azide, either by catalytic hydrogenation over a palladium catalyst or by reaction with LiAlK4. then leads to the desired primary amine. Although the method works well, low-molecular-weight alkyl azides are explosive and must be handled carefully. 

Secondary amines can be added to certain nonactivated alkenes if palladium(II) complexes are used as catalysts The complexation lowers the electron density of the double bond, facilitating nucleophilic attack. Markovnikov orientation is observed and the addition is anti An intramolecular addition to an alkyne unit in the presence of a palladium compound, generated a tetrahydropyridine, and a related addition to an allene is known.Amines add to allenes in the presence of a catalytic amount of CuBr " or palladium compounds.Molybdenum complexes have also been used in the addition of aniline to alkenes. Reduction of nitro compounds in the presence of rhodium catalysts, in the presence of alkenes, CO and H2, leads to an amine unit adding to the alkene moiety. An intramolecular addition of an amine unit to an alkene to form a pyrrolidine was reported using a lanthanide reagent. 

Other nucleophiles add to conjugated systems to give Michael-type products. Aniline derivatives add to conjugated aldehydes in the presence of a catalytic amount of DBU (p. 488). Amines add to conjugated esters in the presence of InCla, La(OTf)3, or YTb(OTf)3 at 3kbar, for example, to give P-amino esters. This reaction can be initiated photochemically. An intramolecular addition of an amine unit to a conjugated ketone in the presence of a palladium catalyst, or... 

The palladium catalyst is essential in this reaction, as was shown in control experiments to make sure that this was not a direct nucleophilic addition of the amine to the electron-poor (regarding the low lying LUMO ) cyclobutadiene ligand. A series of amino-substituted cyclobutadiene complexes have been synthesized by this methodology [29]. 

---