Oxidative addition allylic compounds

The most widely used preparative method of allylindium(m) or propargylindium(lll) compounds is the oxidative addition of metallic indium or indium(l) halides to allylic or propargyl substrates.4 26 27 Allylic bromides and iodides serve as good allylic sources without any other activation. In the case of allylic chlorides, a proper additive such as lithium iodide is required to promote the oxidative addition. Allylic indium compounds prepared by oxidative addition of metallic indium are considered to exist as the sesquihalide structure (allyl jImXj), which has been... 

Formation of a Tr-allylpalladium complex 29 takes place by the oxidative addition of allylic compounds, typically allylic esters, to Pd(0). The rr-allylpal-ladium complex is a resonance form of ir-allylpalladium and a coordinated tt-bond. TT-Allylpalladium complex formation involves inversion of stereochemistry, and the attack of the soft carbon nucleophile on the 7r-allylpalladium complex is also inversion, resulting in overall retention of the stereochemistry. On the other hand, the attack of hard carbon nucleophiles is retention, and hence Overall inversion takes place by the reaction of the hard carbon nucleophiles. 

TT-Aliylpalladium chloride reacts with a soft carbon nucleophile such as mal-onate and acetoacetate in DMSO as a coordinating solvent, and facile carbon-carbon bond formation takes place[l2,265], This reaction constitutes the basis of both stoichiometric and catalytic 7r-allylpalladium chemistry. Depending on the way in which 7r-allylpalladium complexes are prepared, the reaction becomes stoichiometric or catalytic. Preparation of the 7r-allylpalladium complexes 298 by the oxidative addition of Pd(0) to various allylic compounds (esters, carbonates etc.), and their reactions with nucleophiles, are catalytic, because Pd(0) is regenerated after the reaction with the nucleophile, and reacts again with allylic compounds. These catalytic reactions are treated in Chapter 4, Section 2. On the other hand, the preparation of the 7r-allyl complexes 299 from alkenes requires Pd(II) salts. The subsequent reaction with the nucleophile forms Pd(0). The whole process consumes Pd(ll), and ends as a stoichiometric process, because the in situ reoxidation of Pd(0) is hardly attainable. These stoichiometric reactions are treated in this section. 

Several Pd(0) complexes are effective catalysts of a variety of reactions, and these catalytic reactions are particularly useful because they are catalytic without adding other oxidants and proceed with catalytic amounts of expensive Pd compounds. These reactions are treated in this chapter. Among many substrates used for the catalytic reactions, organic halides and allylic esters are two of the most widely used, and they undergo facile oxidative additions to Pd(0) to form complexes which have o-Pd—C bonds. These intermediate complexes undergo several different transformations. Regeneration of Pd(0) species in the final step makes the reaction catalytic. These reactions of organic halides except allylic halides are treated in Section 1 and the reactions of various allylic compounds are surveyed in Section 2. Catalytic reactions of dienes, alkynes. and alkenes are treated in other sections. These reactions offer unique methods for carbon-carbon bond formation, which are impossible by other means. 

Stereochemical features in the oxidative addition and the elimination of /3-hydrogen of cyclic and acyclic alkenes are different. The insertion (palladation) is syn addition. The syn addition (carbopalladation) of R—Pd—X to an acyclic alkene is followed by the syn elimination of 3-hydrogen to give the trans-a ksne 6, because free rotation of 5 is possible with the acyclic alkene. On the other hand, no rotation of the intermediate 7 is possible with a cyclic alkene and the syn elimination of /3-hydrogen gives the allylic compound 8 rather than a substituted alkene. 

In addition, a catalytic version of Tt-allylpalladium chemistry has been devel-oped[6,7]. Formation of the Tr-allylpalladium complexes by the oxidative addition of various allylic compounds to Pd(0) and subsequent reaction of the complex with soft carbon nucleophiles are the basis of catalytic allylation. After the reaction, Pd(0) is reformed, and undergoes oxidative addition to the allylic compounds again, making the reaction catalytic.-In addition to the soft carbon nucleophiles, hard carbon nucleophiles of organometallic compounds of main group metals are allylated with 7r-allylpalladium complexes. The reaction proceeds via transmetallation. These catalytic reactions are treated in this chapter. 

Wylation under neutral conditions. Reactions which proceed under neutral conditions are highly desirable, Allylation with allylic acetates and phosphates is carried out under basic conditions. Almost no reaction of these allylic Compounds takes place in the absence of bases. The useful allylation under neutral conditions is possible with some allylic compounds. Among them, allylic carbonates 218 are the most reactive and their reactions proceed under neutral conditions[13,14,134], In the mechanism shown, the oxidative addition of the allyl carbonates 218 is followed by decarboxylation as an irreversible process to afford the 7r-allylpalladium alkoxide 219. and the generated alkoxide is sufficiently basic to pick up a proton from active methylene compounds, yielding 220. This in situ formation of the alkoxide. which is a... 

C-Allyl Complex Formation. AHyl hahde, aHyl ester, and other aHyl compounds undergo oxidative addition reactions with low atomic valent metal complexes to form TT-aHyl complexes. This is a specific reaction of aHyl compounds. 

As far as the reactions with benzyl chlorides are concerned (74), the oxidative addition of benzyl chloride and substituted benzyl chlorides to palladium atoms yields rj -benzylpalladium chloride dimers. The parent compound, bis(l,2,3-7 -benzyl)di-/i,-chloro-palladium(II), quantitatively adds four molecules of PEts by first forcing the rj -benzyl-iy -benzyl transformation, with subsequent breakage of the Pd-Cl bridges to form trans-bistPEtsKbenzyDchloroPddI). The spectral characteristics of the parent molecule are indicative of the allylic type of bonding. Similar i7 -benzyl compounds were formed from 4-methylbenzyl chloride, 2-chloro-l,l,l-trifluoro-2-phenylethane, and 3,4-dimethylbenzyl chloride. 

The development of the Grignard-type addition to carbonyl compounds mediated by transition metals would be of interest as the compatibility with a variety of functionality would be expected under the reaction conditions employed. One example has been reported on the addition of allyl halides to aldehydes in the presence of cobalt or nickel metal however, yields were low (up to 22%). Benzylic nickel halides prepared in situ by the oxidative addition of benzyl halides to metallic nickel were found to add to benzil and give the corresponding 3-hydroxyketones in high yields(46). The reaction appears to be quite general and will tolerate a wide range of functionality. 

Since nucleophilic addition to a metal-coordinated alkene generates a cr-metal species bonded to an -hybridized carbon, facile 3-H elimination may then ensue. An important example of pertinence to this mechanism is the Wacker reaction, in which alkenes are converted into carbonyl compounds by the oxidative addition of water (Equation (108)), typically in the presence of a Pd(n) catalyst and a stoichiometric reoxidant.399 When an alcohol is employed as the nucleophile instead, the reaction produces a vinyl or allylic ether as the product, thus accomplishing an etherification process. 

The reaction proceeds through ligand exchange and a subsequent P-elimination akin to the oxidative addition of Cp2Zr to allylic ethers [58], In this way, allyltitanium compounds can be obtained from readily available allylic alcohol derivatives and inexpensive Ti(OiPr)4. The method allows the preparation of functionalized allyltitaniums bearing functional groups such as ester or halide (Scheme 13.28). 

A one-pot synthesis of 3,3-disubstituted indolines was achieved by taking advantage of a sequential carbopalladation of allene, nucleophile attack, intramolecular insertion of an olefm and termination with NaBPh4 (Scheme 16.6) [10]. First, a Pd(0) species reacts with iodothiophene selectively to afford ArPdl, probably because the oxidative addition step is facilitated by coordination with the adjacent sulfur atom. Second, the ArPdl adds to allene, giving a Jt-allylpalladium complex, which is captured by a 2-iodoaniline derivative to afford an isolable allylic compound. Under more severe conditions, the oxidative addition of iodide to Pd(0) followed by the insertion of an internal olefm takes place to give an alkylpalladium complex, which is transmetallated with NaBPh4 to release the product. 

The reaction starts with an oxidative addition of an allylic compound to palladium(O) and a Tt-allyl-palladium complex forms. Carboxylates, allyl halides, etc. can be used. In practice one often starts with divalent palladium sources, which require in situ reduction. This reduction can take place in several ways, it may involve the alkene, the nucleophile, or the phosphine ligand added. One can start from zerovalent palladium complexes, but very stable palladium(O) complexes may also require an incubation period. Good starting materials are the 7t-allyl-palladium intermediates ... 

The mechanism of the Zn chloride-assisted, palladium-catalyzed reaction of allyl acetate (456) with carbonyl compounds (457) has been proposed [434]. The reaction involves electroreduction of a Pd(II) complex to a Pd(0) complex, oxidative addition of the allyl acetate to the Pd(0) complex, and Zn(II)/Pd(II) transmetallation leading to an allylzinc reagent, which would react with (457) to give homoallyl alcohols (458) and (459) (Scheme 157). Substituted -lactones are electrosynthesized by the Reformatsky reaction of ketones and ethyl a-bromobutyrate, using a sacrificial Zn anode in 35 92% yield [542]. The effect of cathode materials involving Zn, C, Pt, Ni, and so on, has been investigated for the electrochemical allylation of acetone [543]. 

Allyltin difluoroiodide, formed in situ by the oxidative addition of stannous fluoride to allyl iodide, is found to react with carbonyl compounds to give the corresponding homoallylic alcohols in excellent yields under mild reaction conditions (9). 

Metabolism is the major route of elimination of THC from the body as little is excreted unchanged. In humans, over 20 metabolites have been identified in urine and feces 26 Metabolism in humans involves allylic oxidation, epoxidation, aliphatic oxidation, decarboxylation, and conjugation. The two monohydroxy metabolites (Figure 4.7) 11-hydroxy (OH)-THC and 8-beta-hydroxy THC are active, with the former exhibiting similar activity and disposition to THC, while the latter is less potent. Plasma concentrations of 11-OH-THC are typically <10% of the THC concentration after marijuana smoking. Two additional hydroxy compounds have been identified, namely, 8-alpha-hydroxy-THC and 8,11-dihydroxy-THC, and are believed to be devoid of THC-like activity. Oxidation of 11-OH-THC produces the inactive metabolite, ll-nor-9-carboxy-THC, or THC-COOH. This metabolite may be conjugated with glucuronic acid and is excreted in substantial amounts in the urine. 

Scheme 2 shows Rapoport s synthesis [15]. The cinnamic acid derivative 3 prepared from m-methoxy benzaldehyde [20] was ethylated by diethyl sulfate to give ethyl cinnamate derivative 4, followed by Michael addition with ethyl cyanoacetate to afford compound 5. Compound 5 was converted to lactam 6 by the reduction of the cyano group and subsequent cyclization. Selective reduction of the lactam moiety of 6 was achieved by treatment with trimethy-loxonium fluorob orate followed by sodium borohydride reduction. Amine 8 was obtained by the reductive methylation of amine 7. Amine 8 was converted to compound 9 by methylene lactam rearrangement [21], followed by selenium dioxide oxidation to provide compound 10. Allylic rearrangement of compound 10 and subsequent hydrolysis gave compound 12. The construction of the decahydroisoquinoline structure began with compound 12,... 

---