Oxidation reactions ketones

Out first example is 2-hydroxy-2-methyl-3-octanone. 3-Octanone can be purchased, but it would be difficult to differentiate the two activated methylene groups in alkylation and oxidation reactions. Usual syntheses of acyloins are based upon addition of terminal alkynes to ketones (disconnection 1 see p. 52). For syntheses of unsymmetrical 1,2-difunctional compounds it is often advisable to look also for reactive starting materials, which do already contain the right substitution pattern. In the present case it turns out that 3-hydroxy-3-methyl-2-butanone is an inexpensive commercial product. This molecule dictates disconnection 3. Another practical synthesis starts with acetone cyanohydrin and pentylmagnesium bromide (disconnection 2). Many 1,2-difunctional compounds are accessible via oxidation of C—C multiple bonds. In this case the target molecule may be obtained by simple permanganate oxidation of 2-methyl-2-octene, which may be synthesized by Wittig reaction (disconnection 1). 

Earlier reports have indicated that esters can form before significant amounts of acids accumulate (16). The Bayer-ViUiger oxidations of ketones with intermediate hydroperoxides and/or peracids have been suggested as ester forming mechanisms (34,56). However, the reactions of simple aUphatic ketones with peracetic acid are probably too slow to support this mechanism (57,58). Very early proposals for ester formation, although imaginative, appear improbable (59). 

The radicals are then involved in oxidations such as formation of ketones (qv) from alcohols. Similar reactions are finding value in treatment of waste streams to reduce total oxidizable carbon and thus its chemical oxygen demand. These reactions normally are conducted in aqueous acid medium at pH 1—4 to minimize the catalytic decomposition of the hydrogen peroxide. More information on metal and metal oxide-catalyzed oxidation reactions (Milas oxidations) is available (4-7) (see also Photochemical technology, photocatalysis). 

The chemical properties of cycHc ketones also vary with ring size. Lower members (addition reactions, than corresponding acycHc ketones. The Cg—C 2 ketones are unreactive, reflecting the strain and high enol content of medium-sized ring systems. Lactones are prepared from cycHc ketones by the Bayer-ViUiger oxidation reaction with peracids. S-Caprolactone is manufactured from cyclohexane by this process ... 

Oxidation of LLDPE starts at temperatures above 150°C. This reaction produces hydroxyl and carboxyl groups in polymer molecules as well as low molecular weight compounds such as water, aldehydes, ketones, and alcohols. Oxidation reactions can occur during LLDPE pelletization and processing to protect molten resins from oxygen attack during these operations, antioxidants (radical inhibitors) must be used. These antioxidants (qv) are added to LLDPE resins in concentrations of 0.1—0.5 wt %, and maybe naphthyl amines or phenylenediamines, substituted phenols, quinones, and alkyl phosphites (4), although inhibitors based on hindered phenols are preferred. 

Carbonyl Compounds. Cychc ketals and acetals (dioxolanes) are produced from reaction of propylene oxide with ketones and aldehydes, respectively. Suitable catalysts iaclude stannic chloride, quaternary ammonium salts, glycol sulphites, and molybdenum acetyl acetonate or naphthenate (89—91). Lactones come from Ph4Sbl-cataly2ed reaction with ketenes (92). 

Rhenium oxides have been studied as catalyst materials in oxidation reactions of sulfur dioxide to sulfur trioxide, sulfite to sulfate, and nitrite to nitrate. There has been no commercial development in this area. These compounds have also been used as catalysts for reductions, but appear not to have exceptional properties. Rhenium sulfide catalysts have been used for hydrogenations of organic compounds, including benzene and styrene, and for dehydrogenation of alcohols to give aldehydes (qv) and ketones (qv). The significant property of these catalyst systems is that they are not poisoned by sulfur compounds. 

HAOOAOIN-ISSIOORIOES Ouinoxaline synthesis Synthesis ot quinoxaiine dioxides trom benzoiurazan oxide and ketone enoiates or enamines (also known as Beirut reaction). 

The radicals that are formed from the enolate in this process are rapidly destroyed so that only the stable semidione species remains detectable for EPR study. Semidiones can also be generated oxidatively from ketones by reaction with oxygen in the presence of base. The diketone is presumably generated oxidatively and then reduced to the semidione via reduction by the enolate derived from the original ketone. 

While the oxidation of ketones by peracids (Baeyer-Villiger reaction) has been used in steroids mainly for ring cleavage, it has occasionally been applied to 20-ketopregnanes for conversion to 17-acetoxy- or hydroxyandros-tanes. The synthetic utility of this method is limited since reactive double bonds and other ketones are incompatible with the reagent. 

Oxidative reactions frequently represent a convenient preparative route to synthetic intermediates and end products This chapter includes oxidations of alkanes and cycloalkanes, alkenes and cycloalkenes, dienes, aromatic fluorocarbons, alcohols, phenols, ethers, aldehydes and ketones, carboxylic acids, nitrogen compounds, and organophosphorus, -sulfur, -selenium, -iodine, and -boron compounds... 

AMcycUc perfluoroketones undergo similar oxidation reactions as aromaUc fluoroaldehydes (equation 61). a lower concentration of hydrogen peroride oxidizes the ketones to a-hydroxy hydroperoxides [72], whereas concentrated hydrogen peroxide converts them to I,l -dihydroxydi(petfluorocycloalkyl) peroxides [16, 73] (equation 64). 

The formation of a-acetoxyketones by oxidation of enamines with thallic acetate has been studied in detail (27) and found to be of preparative value (80 % yields) particularly in five- and six-membered-ring ketone derivatives. Enamines of linear or seven-membered-ring ketones were oxidized also, but at very much slower rates. Enamines of aldehydes with a-hydrogen substituents underwent self-eondensations during the oxidation reactions. Lead tetraacetate was less satisfactory as an oxidizing agent. 

FIGURE 18.20 NAD and NADP participate exclusively iii two-electroii transfer reactions. For example, alcohols can be oxidized to ketones or aldehydes via hydride transfer to NAD(P). ... 

ThomsonNHDV, Click Organic Interactive to use a web-based palette to predict products from a variety of oxidation reactions involving aldehydes and ketones. 

In the third sequence, the diastereomer with a /i-epoxide at the C2-C3 site was targeted (compound 1, Scheme 6). As we have seen, intermediate 11 is not a viable starting substrate to achieve this objective because it rests comfortably in a conformation that enforces a peripheral attack by an oxidant to give the undesired C2-C3 epoxide (Scheme 4). If, on the other hand, the exocyclic methylene at C-5 was to be introduced before the oxidation reaction, then given the known preference for an s-trans diene conformation, conformer 18a (Scheme 6) would be more populated at equilibrium. The A2 3 olefin diastereoface that is interior and hindered in the context of 18b is exterior and accessible in 18a. Subjection of intermediate 11 to the established three-step olefination sequence gives intermediate 18 in 54% overall yield. On the basis of the rationale put forth above, 18 should exist mainly in conformation 18a. Selective epoxidation of the C2-C3 enone double bond with potassium tm-butylperoxide furnishes a 4 1 mixture of diastereomeric epoxides favoring the desired isomer 19 19 arises from a peripheral attack on the enone double bond by er/-butylper-oxide, and it is easily purified by crystallization. A second peripheral attack on the ketone function of 19 by dimethylsulfonium methylide gives intermediate 20 exclusively, in a yield of 69%. 

Histories . The Na salt was first isolated by the reaction of nitric oxide on acet (Ref 2) later the same worker found that the action of nitric oxide and Na hydroxide on any compd contg the acetyl group would give Na MEDNA [compds treated were mesityl oxide, methylisopropyl ketone, acetophenone, and ethyl dimethyl-... 

At elevated temperatures, methylene carbons cleave from aromatic rings to form radicals (Fig. 7.44). Further fragmentation decomposes xylenol to cresols and methane (Fig. 7.44a). Alternatively, auto-oxidation occurs (Fig. 1.44b ). Aldehydes and ketones are intermediates before decarboxylation or decarbonylation takes place to generate cresols and carbon dioxide. These oxidative reactions are possible even in inert atmospheres due to the presence of hydroxyl radicals and water.5... 

Sheldon et al. have combined a KR catalyzed by CALB with a racemization catalyzed by a Ru(II) complex in combination with TEMPO (2,2,6,6-tetramethylpi-peridine 1-oxyl free radical) [28]. They proposed that racemization involved initial ruthenium-catalyzed oxidation of the alcohol to the corresponding ketone, with TEMPO acting as a stoichiometric oxidant. The ketone was then reduced to racemic alcohol by ruthenium hydrides, which were proposed to be formed under the reaction conditions. Under these conditions, they obtained 76% yield of enantiopure 1-phenylethanol acetate at 70° after 48 hours. 

Since the transition state for alcohol oxidation and ketone reduction must be identical, the product distribution (under kinetic control) for reducing 2-butanone and 2-pentanone is also predictable. Thus, one would expect to isolate (R)-2-butanol if the temperature of the reaction was above 26 °C. On the contrary, if the temperature is less than 26 °C, (S)-2-butanol should result in fact, the reduction of... 

Aldehydes and ketones can be converted to ethers by treatment with an alcohol and triethylsilane in the presence of a strong acid or by hydrogenation in alcoholic acid in the presence of platinum oxide. The process can formally be regarded as addition of ROH to give a hemiacetal RR C(OH)OR", followed by reduction of the OH. In this respect, it is similar to 16-14. In a similar reaction, ketones can be converted to carboxylic esters (reductive acylation of ketones) by treatment with an acyl chloride and triphenyltin hydride. " ... 

The above-described reverse reaction (viz. the Fe-catalyzed dehydrogenation of alcohols to ketones/aldehydes) has been reported by Williams in 2009 (Table 9) [58]. In this reaction, the bicyclic complex 16 shows a sluggish activity, whereas the dehydrogenation of l-(4-methoxyphenyl)ethanol catalyzed by the phenylated complex 17 affords the corresponding ketone in 79% yield when 1 equiv. (relative to 17) of D2O as an additive was used. For this oxidation reaction, l-(4-methoxyphenyl) ethanol is more suitable than 1-phenylethanol and the reaction rate and the yield of product are higher. 

The Baeyer-Villiger oxidation reaction was discovered more than 100 years ago by Adolf von Baeyer and Victor Villiger. By this reaction, ketones are converted into the corresponding esters. In organic chemistry, peracids are commonly used as catalyst to perform this atypical oxidation reaction that results in oxygen insertion into a carbon—carbon bond (Fig. 1). 

TS-1 is a material that perfectly fits the definition of single-site catalyst discussed in the previous Section. It is an active and selective catalyst in a number of low-temperature oxidation reactions with aqueous H2O2 as the oxidant. Such reactions include phenol hydroxylation [9,17], olefin epoxida-tion [9,10,14,17,40], alkane oxidation [11,17,20], oxidation of ammonia to hydroxylamine [14,17,18], cyclohexanone ammoximation [8,17,18,41], conversion of secondary amines to dialkylhydroxylamines [8,17], and conversion of secondary alcohols to ketones [9,17], (see Fig. 1). Few oxidation reactions with ozone and oxygen as oxidants have been investigated. 

---