Oriented polymers physical properties

There are two major aspects to this discussion of orientation in polymers. First, there is the question of defining orientation, and the information which can be obtained in principle by any given spectroscopic technique regarding orientation in a polymer. This leads directly to the problem of relating orientation to deformation mechanisms, because this may permit comparatively limited information to be put to optimum use. Secondly, there is the relationship between orientation and physical properties, especially mechanical properties, where such information has been valuable in stimulating and assessing practical developments such as high modulus polymers. 

This section will demonstrate the first sergeants and soldiers-type helix command surface experiment, in which thermo-driven chiroptical transfer and amplification in optically inactive polysilane film from grafted (or spin-coated) optically active helical polysilane onto quartz substrate [92]. Although helix and optical activity amplification phenomena based on the sergeants and soldiers principle was mainly investigated in polymer stereochemistry, the orientation and physical properties of a thick layer deposited onto a solid surface and controlled by a monolayer command film based on command surface principles was established in photochemical material and surface science [93,94]. Both sergeants and soldiers and command surface experiments appear to have been developed independently. 

Orientation has a pronounced effect on the physical properties of polymers. Oriented polymers have properties, which vary in different directions, i.e. they are anisotropic. 

The properties of PLA, as indeed those of other polymers, depend on its molecular characteristics, as well as on the presence of ordered structures, such as crystalline thickness, crystallinity, spherulite size, morphology and degree of chain orientation. The physical properties of polylactide are related to the enantiomeric purity of the lactic acid stereo-copolymers. Homo-PLA is a linear macromolecule with a molecular architecture that is determined by its stereochemical composition. PLA can be produced in a totally amorphous or with up to 40 per cent crystalline. PLA resins containing more than 93 per cent of L-lactic acid are semi-crystalline, but, when it contains 50-93 per cent of it, it is entirely amorphous. Both meso- and D-lactides induce twists in the very regular PLLA architecture. Macromolecular imperfections are responsible for the decrease in both the rate and the extent of PLLA crystallization. In practise, most PLAs are made up of L-and D,L-lactide copolymers, since the reaction media often contain some meso-lactide iir turities. 

Noncrystalline domains in fibers are not stmctureless, but the stmctural organization of the polymer chains or chain segments is difficult to evaluate, just as it is difficult to evaluate the stmcture of Hquids. No direct methods are available, but various combinations of physicochemical methods such as x-ray diffraction, birefringence, density, mechanical response, and thermal behavior, have been used to deduce physical quantities that can be used to describe the stmcture of the noncrystalline domains. Among these quantities are the amorphous orientation function and the amorphous density, which can be related to some of the important physical properties of fibers. 

Extmsion of polyethylene and some polypropylenes is usually through a circular die into a tubular form, which is cut and collapsed into flat film. Extmsion through a linear slot onto chilled rollers is called casting and is often used for polypropylene, polyester, and other resins. Cast, as well as some blown, films may be further heated and stretched in the machine or in transverse directions to orient the polymer within the film and improve physical properties such as tensile strength, stiffness, and low temperature resistance. 

Nylon-6,6 and nylon-6 have competed successfully ia the marketplace siace their respective commercial iatroductioas ia 1939 and 1941, and ia the 1990s share, about equally, 90% of the total polyamide market. Their chemical and physical properties are almost identical, as the similarity of their chemical stmcture might suggest the amide functions are oriented ia the same directioa aloag the polymer chain for ayloa-6, but are altematiag ia directioa for ayloa-6,6. 

Two approaches to the attainment of the oriented states of polymer solutions and melts can be distinguished. The first one consists in the orientational crystallization of flexible-chain polymers based on the fixation by subsequent crystallization of the chains obtained as a result of melt extension. This procedure ensures the formation of a highly oriented supramolecular structure in the crystallized material. The second approach is based on the use of solutions of rigid-chain polymers in which the transition to the liquid crystalline state occurs, due to a high anisometry of the macromolecules. This state is characterized by high one-dimensional chain orientation and, as a result, by the anisotropy of the main physical properties of the material. Only slight extensions are required to obtain highly oriented films and fibers from such solutions. 

Anisotropy of Physical Properties as the Main Feature of the Oriented State of Polymers... 

In this review recent theoretical developments which enable quantitative measures of molecular orientation in polymers to be obtained from infra-red and Raman spectroscopy and nuclear magnetic resonance have been discussed in some detail. Although this is clearly a subject of some complexity, it has been possible to show that the systematic application of these techniques to polyethylene terephthalate and polytetramethylene terephthalate can provide unique information of considerable value. This information can be used on the one hand to gain an understanding of the mechanisms of deformation, and on the other to provide a structural understanding of physical properties, especially mechanical properties. 

Polymer molecules in fabricated items rarely adopt a true random walk. Manufacturing processes stretch out molecules and then freeze them in an extended configuration before they have time to relax to the random state. Manufacturers exploit orientation in order to control physical properties. 

Sometimes the hazy optical properties of polypropylene are a detriment to its use in thin films. To address this problem, as well as to improve physical properties and reduce material costs, we can orient the molecular chains by stretching the polymer film after it has left the extrusion die. There are two methods of orienting films, film blowing, shown in Fig. 11.6, and tentering, shown in Fig, 19.6. 

Thermoplastic polymer macromolecules usually tend to become oriented (molecular chain axis aligns along the extrusion direction) upon extrusion or injection moulding. This can have implications on the mechanical and physical properties of the polymer. By orienting the sample with respect to the coordinate system of the instrument and analysing the sample with polarised Raman (or infrared) light, we are able to get information on the preferred orientation of the polymer chains (see, for example, Chapter 8). Many polymers may also exist in either an amorphous or crystalline form (degree of crystallinity usually below 50%, which is a consequence of their thermal and stress history), see, for example, Chapter 7. 

Experimental results are presented that show that high doses of electron radiation combined with thermal cycling can significantly change the mechanical and physical properties of graphite fiber-reinforced polymer-matrix composites. Polymeric materials examined have included 121 °C and 177°C cure epoxies, polyimide, amorphous thermoplastic, and semicrystalline thermoplastics. Composite panels fabricated and tested included four-ply unidirectional, four-ply [0,90, 90,0] and eight-ply quasi-isotropic [0/ 45/90]s. Test specimens with fiber orientations of [10] and [45] were cut from the unidirectional panels to determine shear properties. Mechanical and physical property tests were conducted at cold (-157°C), room (24°C) and elevated (121°C) temperatures. 

Liquid crystal polymers (LCP) are polymers that exhibit liquid crystal characteristics either in solution (lyotropic liquid crystal) or in the melt (thermotropic liquid crystal) [Ballauf, 1989 Finkelmann, 1987 Morgan et al., 1987]. We need to define the liquid crystal state before proceeding. Crystalline solids have three-dimensional, long-range ordering of molecules. The molecules are said to be ordered or oriented with respect to their centers of mass and their molecular axes. The physical properties (e.g., refractive index, electrical conductivity, coefficient of thermal expansion) of a wide variety of crystalline substances vary in different directions. Such substances are referred to as anisotropic substances. Substances that have the same properties in all directions are referred to as isotropic substances. For example, liquids that possess no long-range molecular order in any dimension are described as isotropic. 

---