Organic surface property

Dubois L FI and Nuzzo R G 1992 Synthesis, structure, and properties of model organic surfaces Annu. Rev. Phys. Chem. 43 437-63... 

Volatilization. The susceptibility of a herbicide to loss through volatilization has received much attention, due in part to the realization that herbicides in the vapor phase may be transported large distances from the point of application. Volatilization losses can be as high as 80—90% of the total applied herbicide within several days of application. The processes that control the amount of herbicide volatilized are the evaporation of the herbicide from the solution or soHd phase into the air, and dispersal and dilution of the resulting vapor into the atmosphere (250). These processes are influenced by many factors including herbicide application rate, wind velocity, temperature, soil moisture content, and the compound s sorption to soil organic and mineral surfaces. Properties of the herbicide that influence volatility include vapor pressure, water solubility, and chemical stmcture (251). 

Turbidity. Turbidity in water is removed by ozonation (0.5—2 ppm) through a combination of chemical oxidation and charge neutralization. GoUoidal particles that cause turbidity are maintained in suspension by negatively charged particles which are neutralized by ozone. Ozone further alters the surface properties of coUoidal materials by oxidizing the organic materials that occur on the surface of the coUoidal spherical particles. 

Clay particles are so finely divided that clay properties are often controlled by the surface properties of the minerals rather than by bulk chemical composition. Particle size, size distribution, and shape the nature and amount of both mineral and organic impurities soluble materials, nature, and amount of exchangeable ions and degree of crystal perfection are all known to affect the properties of clays profoundly. 

Last years the polymeric surface - active substances began to use as modifiers of organic reagent properties. In our work the behavior of synthetic polymers (polysulphonilpiperidinilmethylenhydroxide (PSPMH), polyvinylpyrrolidone (PVP), polyamines - polyguanidine and metacide) and natural polymers (starch, gelatin) for various molecular masses are investigated. 

Coatings of tin produced from tin-containing aqueous solutions by chemical replacement may be used to provide special surface properties such as appearance or low friction, but protect from corrosion only in non-aggressive environments. Copper and brass may be tinned in alkaline cyanide solutions or in acid solutions containing organic addition agents such as thiourea. Steel may be first coated with copper and then treated... 

A surface is that part of an object which is in direct contact with its environment and hence, is most affected by it. The surface properties of solid organic polymers have a strong impact on many, if not most, of their apphcations. The properties and structure of these surfaces are, therefore, of utmost importance. The chemical stmcture and thermodynamic state of polymer surfaces are important factors that determine many of their practical characteristics. Examples of properties affected by polymer surface stmcture include adhesion, wettability, friction, coatability, permeability, dyeabil-ity, gloss, corrosion, surface electrostatic charging, cellular recognition, and biocompatibility. Interfacial characteristics of polymer systems control the domain size and the stability of polymer-polymer dispersions, adhesive strength of laminates and composites, cohesive strength of polymer blends, mechanical properties of adhesive joints, etc. 

The popular applications of the adsorption potential measurements are those dealing with the surface potential changes at the water/air and water/hydrocarbon interface when a monolayer film is formed by an adsorbed substance. " " " Phospholipid monolayers, for instance, formed at such interfaces have been extensively used to study the surface properties of the monolayers. These are expected to represent, to some extent, the surface properties of bilayers and biological as well as various artificial membranes. An interest in a number of applications of ordered thin organic films (e.g., Langmuir and Blodgett layers) dominated research on the insoluble monolayer during the past decade. 

Friedman, L. I., Liem, H., Grabowski, E. F., Leonard, E. F., and McCord, C. W., Inconsequentiality of surface properties for initial platelet adhesion. Transactions— American Society for Artificial Internal Organs 16, 63-73 (1970). 

Metal oxides have a significant role in influencing physical, chemical, and biological properties of soils. They may exist as ciystalline minerals, as short-range ordered (SRO) mineral colloids, or as surface coatings on clay minerals and organic matter. Organic compounds influence the formation, transformation, and surface properties of these metal oxides. The SRO A1... 

---