Of transition metal ions

J. S. Griffith, The theory of transition metal ions, Cambridge University Press, 1961. 

With most transition metals, eg, Cu, Co, and Mn, both valence states react with hydroperoxides via one electron transfer (eqs. 11 andl2). Thus, a small amount of transition-metal ion can decompose a large amount of hydroperoxide and, consequendy, inadvertent contamination of hydroperoxides with traces of transition-metal impurities should be avoided. 

The reactions of alkyl hydroperoxides with ferrous ion (eq. 11) generate alkoxy radicals. These free-radical initiator systems are used industrially for the emulsion polymerization and copolymerization of vinyl monomers, eg, butadiene—styrene. The use of hydroperoxides in the presence of transition-metal ions to synthesize a large variety of products has been reviewed (48,51). 

Metal-Catalyzed Oxidation. Trace quantities of transition metal ions catalyze the decomposition of hydroperoxides to radical species and greatiy accelerate the rate of oxidation. Most effective are those metal ions that undergo one-electron transfer reactions, eg, copper, iron, cobalt, and manganese ions (9). The metal catalyst is an active hydroperoxide decomposer in both its higher and its lower oxidation states. In the overall reaction, two molecules of hydroperoxide decompose to peroxy and alkoxy radicals (eq. 5). 

Even very small amounts of transition-metal ions like cobalt, nickel, and copper cause rapid decomposition. They form reactive intermediates that can decrease the stabiUty of oxidizable compounds in the bleach solution and increase the damage to substrates. Hypochlorite is also decomposed by uv light (24,25). Acidic solutions also lose available chlorine by the reverse of equations 1 and 2. 

Color from Transition-Metal Compounds and Impurities. The energy levels of the excited states of the unpaked electrons of transition-metal ions in crystals are controlled by the field of the surrounding cations or cationic groups. Erom a purely ionic point of view, this is explained by the electrostatic interactions of crystal field theory ligand field theory is a more advanced approach also incorporating molecular orbital concepts. 

In general, octahedral complexes of transition-metal ions possessing 0, 1, or 2 electrons beyond the electronic configuration of the preceding noble gas, ie, i/, (P configurations, are labile. The (P systems are usually inert the relative lability of vanadium(II) may be charge and/or redox related. 

Results of quantum-mechanical calculations (Dunitz and Orgel, 1957) have given values for the OSPEs of a number of transitional metal ions and the degree of inversion of mixed spinels... 

A. Coordinative Insufficiency of Transition Metal Ions in Active... 

It is necessary to note the limitation of the approach to the study of the polymerization mechanism, based on a formal comparison of the catalytic activity with the average oxidation degree of transition metal ions in the catalyst. The change of the activity induced by some factor (the catalyst composition, the method of catalyst treatment, etc.) was often assumed to be determined only by the change of the number of active centers. Meanwhile, the activity (A) of the heterogeneous polymerization catalyst depends not only on the surface concentration of the propagation centers (N), but also on the specific activity of one center (propagation rate constant, Kp) and on the effective catalyst surface (Sen) as well ... 

Spectra of transition metal ions in crystals. J. Ferguson, Rev. Pure Appl. Chem., 1964,14,1-14 (59). 

Unpaired electrons and magnetism - One of the consequences of the open (incompletely filled) d" configuration of transition-metal ions may be the presence of one or more unpaired electrons. Such compounds could be described as radicals, and they are detected by techniques such as electron spin resonance spectroscopy. 

J.S. Griffith, Theory of Transition Metal Ions, Cambridge University Press, Cambridge, 1961. 

This is only the beginning of a process which ultimately results in the formation of solid state hydroxides or oxides. Actually, the solution species present in neutral or alkaline solutions of transition-metal ions are relatively poorly characterized. The formation of numerous hydroxy- and oxy-bridged polynuclear species makes their investigation very difficult. However, it is clear that there is a near-continuous transition from mononuclear solution species, through polynuclear solution species to colloidal and solid state materials. By the way, the first example of a purely inorganic compound to exhibit chirality was the olated species 9.11. 

Electropolymerization is also an attractive method for the preparation of modified electrodes. In this case it is necessary that the forming film is conductive or permeable for supporting electrolyte and substrates. Film formation of nonelectroactive polymers can proceed until diffusion of electroactive species to the electrode surface becomes negligible. Thus, a variety of nonconducting thin films have been obtained by electrochemical oxidation of aromatic phenols and amines Some of these polymers have ligand properties and can be made electroactive by subsequent inincorporation of transition metal ions... 

Dioximes are widely used bidentate ligands for the complexation of transition metal ions with the characteristic property to form complexes with a pseudo-macrocyclic structure if two or more of these ligands are chelating the same metal ion (119, Fig. 31) [163]. 

The latter reactions are catalyzed by a number of transition metal ions which can exist in several oxidation states in aqueous solution, e.g.,... 

Deiana S., Micera G., Muggiolu G., Gessa C. Pusino A. (1983) Interaction of transition-metal ions with polygalacturonic acid a potentiometric study. Colloids Surf. 6,17-25. 

Oxygen, in the air, is probably the cheapest, most readily available oxidant and so it is not suprising that industrial processes using this reagent for the oxidation of sulphoxides has been patented. These procedures involve the use of transition metal ion catalysts " in solvents containing acetic acid , acetone and carboxylic acids . 

Organic hydroperoxides have also been used for the oxidation of sulphoxides to sulphones. The reaction in neutral solution occurs at a reasonable rate in the presence of transition metal ion catalysts such as vanadium, molybdenum and titanium - , but does not occur in aqueous media . The usual reaction conditions involve dissolution of the sulphoxide in alcohols, ethers or benzene followed by dropwise addition of the hydroperoxide at temperatures of 50-80 °C. By this method dimethyl sulphoxide and methyl phenyl sulphoxide have been oxidized to the corresponding sulphone in greater than 90% yields . A similar method for the oxidation of sulphoxides has been patented . Unsaturated sulphoxides are oxidized to the sulphone without affecting the carbon-carbon double bonds. A further patent has also been obtained for the reaction of dimethyl sulphoxide with an organic hydroperoxide as shown in equation (19). 

The photolytic reduction of N2 at TiO -suspensions was at first reported by Schrauzer et al. Small amounts of NH3 and N2H4 were obtained as products. The highest activity was found with anatase containing 20-30 % rutile. Very low yields were also obtained with p-GaP electrodes under illumination It is much easier to produce NH3 from NO -solutions at CdS- and Ti02-particles using S -ions as hole scavengers . Efficiencies are not reported yet. Recently the formation of NH3 from NO was observed at p-GaAs electrodes under illumination. In this case NH3-formation was only found in the presence of transition metal ions or their complex with EDTA. 

As a matter of fact low-lying MMCT states can also influence radiative transition probabilities. The long decay time of the VO4 luminescence is considerably shortened by the presence of Bi " [27] due to a Bi(IV)-V(IV) MMCT state (see also above). Such effects are very well-known for LMCT states in case of transition-metal ions and lanthanide ions [6]. They will not be discussed here any further. 

Although atherosclerosis and rheumatoid arthritis (RA) are distinct disease states, both disorders are chronic inflammatory conditions and may have common mechanisms of disease perpetuation. At sites of inflammation, such as the arterial intima undergoing atherogen-esis or the rheumatoid joint, oxygen radicals, in the presence of transition-metal ions, may initiate the peroxidation of low-density lipoprotein (LDL) to produce oxidatively modified LDL (ox-LDL). Ox-LDL has several pro-inflammatory properties and may contribute to the formation of arterial lesions (Steinberg et /., 1989). Increased levels of lipid peroxidation products have been detected in inflammatory synovial fluid (Rowley et /., 1984 Winyard et al., 1987a Merry et al., 1991 Selley et al., 1992 detailed below), but the potential pro-inflammatory role of ox-LDL in the rheumatoid joint has not been considered. We hypothesize that the oxidation of LDL within the inflamed rheumatoid joint plays a pro-inflammatory role just as ox-LDL has the identical capacity within the arterial intima in atherosclerosis. 

It has been known for many years that neither Oa nor H2O2 causes any strand breakage in DNA, if the reaction mixture is carefully freed of transition metal ions (see e.g. Rowley and Halliwell, 1983). Our later work... 

---