Objectivity kinds

On occasion, research studies directly confirm the brain-disabling principle, but without intending to do so and without acknowledging it. In some ways, this is the most objective kind of research in that the researchers are unaware of the principle that they are testing. The following three studies involve the second-generation or atypical neuroleptic risperidone (Risperdal), which is widely prescribed to children and adults. 

Biological activity is the result of a chemical compound s interaction with biological objects. It depends on the characteristics of (i) the compound (structure of molecule and its physicochemical properties), (ii) biological object (kind, sex, age, etc), (iii) way of exposure (route of administration, dosage) and (iv) peculiarities of the experimental terms and conditions. 

Knowledge of physical properties of fluids is essential to the process engineer because it enables him to specify, size or verify the operation of equipment in a production unit. The objective of this chapter is to present a collection of methods used in the calculation of physical properties of mixtures encountered in the petroleum industry, different kinds of hydrocarbon components, and some pure compounds. 

Secondly, the linearized inverse problem is, as well as known, ill-posed because it involves the solution of a Fredholm integral equation of the first kind. The solution must be regularized to yield a stable and physically plausible solution. In this apphcation, the classical smoothness constraint on the solution [8], does not allow to recover the discontinuities of the original object function. In our case, we have considered notches at the smface of the half-space conductive media. So, notche shapes involve abrupt contours. This strong local correlation between pixels in each layer of the half conductive media suggests to represent the contrast function (the object function) by a piecewise continuous function. According to previous works that we have aheady presented [14], we 2584... 

We have thus far discussed the diffraction patterns produced by x-rays, neutrons and electrons incident on materials of various kinds. The experimentally interesting problem is, of course, the inverse one given an observed diffraction pattern, what can we infer about the stmctirre of the object that produced it Diffraction patterns depend on the Fourier transfonn of a density distribution, but computing the inverse Fourier transfomi in order to detemiine the density distribution is difficult for two reasons. First, as can be seen from equation (B 1.8.1), the Fourier transfonn is... 

For tire purjDoses of tliis review, a nanocrystal is defined as a crystalline solid, witli feature sizes less tlian 50 nm, recovered as a purified powder from a chemical syntliesis and subsequently dissolved as isolated particles in an appropriate solvent. In many ways, tliis definition shares many features witli tliat of colloids , defined broadly as a particle tliat has some linear dimension between 1 and 1000 nm [1] tire study of nanocrystals may be drought of as a new kind of colloid science [2]. Much of die early work on colloidal metal and semiconductor particles stemmed from die photophysics and applications to electrochemistry. (See, for example, die excellent review by Henglein [3].) However, the definition of a colloid does not include any specification of die internal stmcture of die particle. Therein lies die cmcial distinction in nanocrystals, die interior crystalline stmcture is of overwhelming importance. Nanocrystals must tmly be little solids (figure C2.17.1), widi internal stmctures equivalent (or nearly equivalent) to drat of bulk materials. This is a necessary condition if size-dependent studies of nanometre-sized objects are to offer any insight into die behaviour of bulk solids. 

The Universal Modeling Language is used to describe a software system [4, 5], Several kinds of diagrams exist to model the diverse properties of the system. Thus a description of the system can be developed that enables the systematic and uniform documentation of the system. The class diagram, for example, represents the classes and their relationships. But also interacting diagrams exist, to describe the dynamic behavior of the system and its objects. 

The difference m odor between (R) and (S) carvone results from their different behavior toward receptor sites m the nose It is believed that volatile molecules occupy only those odor receptors that have the proper shape to accommodate them Because the receptor sites are themselves chiral one enantiomer may fit one kind of receptor while the other enantiomer fits a different kind An analogy that can be drawn is to hands and gloves Your left hand and your right hand are enantiomers You can place your left hand into a left glove but not into a right one The receptor (the glove) can accommodate one enantiomer of a chiral object (your hand) but not the other... 

With this kind of information it is not difficult to evaluate the average lengths of isotactic and syndiotactic sequences in a polymer. As a step toward this objective, we define the following ... 

The application of these ideas to the mixing of low molecular weight liquids has been the object of extensive research. As a result of these investigations, the appropriate kind of hybridization of individual molecular properties in W12 is found to be the geometrical mean ... 

MultiwaU. shipping sacks are suitable for transport in aU kinds of carriers from tmcks to seafaring vessels. Particular care must be taken to prevent the storage of objects with sharp projections adjacent to the bags in case of doubt, it is advisable to line the enclosure with kraft paper of a basis weight >23 kg. Additional rules for the transportation of multiwaU sacks are contained in appHcable tariff specifications and should be consulted for rail, tmck, and ocean-going shipments. 

Today for this kind of object, the aluminum anodes are usually insulated and connected via cables outside the tank. By this means it is possible to purify and activate the anodes by applying anodic current pulses from an external voltage source. This is necessary during the course of operation since the anode surfaces can be easily passivated by oil films [7]. 

EPA has 45 days to review each permit and to object to permits that violate the CAAA. If EPA fails to object to a permit that violates the Act or the implementation plan, any person may petition EPA to object within 60 days following EPA s 45-day review period, and EPA must grant or deny the permit within 60 days. Judicial review of EPA s decision on a citizen s petition can occur in the federal court of appeals. The public is guaranteed the right to inspect and review all permit applicahons and documents. There are provisions for three kinds of permit revisions administrative amendment, minor permit modification, and significant modification. 

The whole of polymer science is constructed around a battery of concepts which are largely distinct from those familiar in other families of materials, metals in particular. This is the reason why I invited an eminent polymer scientist who was originally a physical metallurgist to write, for a textbook of physical metallurgy edited by me, a chapter under the title A metallurgist s guide to polymers (Windle 1996). The objective was to remove some of the mystery surrounding polymer science in the eyes of other kinds of materials scientists. 

My principal objective in Section 10.4 has been to underline the necessity for a drastic enhancement of a crucial experimental technology, the production of ultrahigh vacuum, as a precondition for the emergence of a new branch of science, and this enhancement was surveyed in the preceding Section. It would not be appropriate in this book to present a detailed account of surface science as it has developed, so 1 shall restrict myself to a few comments. The field has been neatly subdivided among chemists, physicists and materials scientists it is an ideal specimen of the kind of study which has flourished under the conditions of the interdisciplinary materials laboratories described in Chapter 1. 

The first scheme for the separation of the six chief alkaloids of opium, VIZ., morphine, codeine, thebaine, papaverine, narcotine and narceine, is probably that of Plugge. Much later Kljatschkina investigated for each of these six bases the properties by means of which isolation and estimation could probably be effected and, on the basis of the results, devised a plan for such analyses. More recently Anneler has published a detailed account of a scheme with the same objective. l Attention had already been given to complex, systematic analyses of this kind, in connection with examination of the mixtures of opium alkaloids, which have long been in use in medicine in these at first only morphine and other alkaloids were determined, but in the more recent schemes provision is made for the estimation of each alkaloid. ... 

In contrast, with composite materials, the materials utilization factor is rarely higher than 1.2 to 1.3. That is, only a maximum of 20-30% of the material is wasted with composite structures. Whereas obviously with a materials utilization factor for some metal parts of 15-25, the waste is 1500-2500% Those are not individually typical numbers, but are the worst cases in both situations, i.e., for metals and composite materiais. For metals, there are many, many operations for which the waste factor is very iow. And for composite materials there are also many situations where the waste factor is much lower than 20-30%. The point is that the worst-case situations are totaliy different for these two kinds of materials based on the way objects are inherently created with the two different types of materials. Composite materials are built up until the limits of the desired geometry are reached. At that point, the layup operation simpiy ceases. Composite materials and structures are fabricated in as ciose to the final configuration as possible, i.e., so-calied near-net shape. 

The next problem area of micromechanics is initially very attractive in some respects. We look to the fundamental definition of a composite material made up in this case of, say, a fiber and a matrix and attempt to actually design that material. Let us change the proportions of fibers and matrix so that we get the kind of material behavior characteristics we want. That objective is admirable, but achieving that objective in all cases is not entirely realistic. 

Written surveys request feedback on the PSM system, asking about its clarity, ease of use, quality of training received on the system, perceived barriers to its effective use, perceived effectiveness in meeting objectives, and suggested modifications and improvements. These kinds of surveys typically mix open-ended and "yes/no" questions, and are distributed to all system users they tend to be simple and brief to encourage participation. Figure 8-6 provides an example. 

We shall often be dealing with sets of objects of some kind. A set, which we will label by capital letters A, B,. .is a collection of objects, denoted by lowercase letters a, b, , which are members (or elements) of the set. Finite sets may be defined by explicitly listing all of their members if the set A consists of the three elements a, b, c, for example, we would write A = a, b, c. We also write a A to mean that a belongs to the set A. Arbitrary sets may sometimes be more conveniently specified by some property V, which is shared by all of their members. For example, the set... 

Had one sorted these three objects according to the new property (that discriminates according to spatial position), one would again have two kinds of objects, but in this case they would have been different ones. 

---