Nitriles, solid

B). Many nitriles when treated with hydrogen peroxide in warm alkaline solution undergo hydrolysis to amides which can thus be readily obtained in high yield. Insoluble liquid nitriles can be treated directly in the aqueous suspension, but for insoluble solid nitriles the addition of a suitable organic solvent to give a complete solution may be desirable, although the completion of the hydrolysis may not then be so readily detected. 

Warm a solution of 0 5 g. of the nitrile in 2 ml. of concentrated sulphuric acid to 80-90° and allow the solution to stand for 5 minutes. Cool under the tap and pour the sulphuric acid solution into 20 ml. of cold water. Filter off the precipitated solid and stir it with 5 ml. of cold 5 per cent, sodium hydroxide solution. Collect the insoluble crude amide and recrystallise it from dilute alcohol. 

Aromatic nitriles are generally liquids or low melting point solids, and usually have characteristic odours. They give no ammonia with aqueous sodium hydroxide solution in the cold, are hydrolysed by boiling aqueous alkali but more slowly than primary amides ... 

P-Cyanopyridine. Mix 25 g. of powdered nicotinamide with 30g. of phosphoric oxide in a 150 ml. distilling flask by shaking. Immerse the flask in an oil bath and arrange for distillation under a pressure of about 30 mm. Raise the temperature of the oil bath rapidly to 300°, then remove the oil bath and continue the heating with a free flame as long as a distillate is obtained. The nitrile crystallises on cooling to a snow-white solid. Redistil the solid at atmospheric pressure practically all of it passes over at 201° and crystallises completely on cooling. The yield of p-cyanopyridine, m.p. 49°, is 20 g. 

Nitriles and simple amides differ in physical properties the former are liquids or low-melting Solids, whilst the latter are generally solids. If the amide is a solid and insoluble in water, it may be readily prepared from the nitrile by dissolving in concentrated sulphuric acid and pouring the solution into water ... 

The solid is separated by filtration and the filtrate is extracted with three 150-ml. portions of ether. Caution Gloves should be worn when handling this solution because of the large amount of cyanide it contains.) The solid is dissolved in ether and this solution is combined with the extracts. The combined ethereal solutions are washed with water and dried over 5 g. of sodium sulfate. Removal of the solvent by distillation leaves crude ferrocenyl-acetonitrile as a solid or as an oil that crystalli/.es on being scratched. I he nitrile is dissolved in about 200 ml. of boiling... 

Nitrile rubber/phenolic resin blends. Blends of equal parts by weight of a nitrile rubber and a phenolic resin in methyl ethyl ketone (at a 20-30 wt% total solids content) is suitable for many adhesive purposes. The more phenolic resin in the formulation, the greater the bond strength and brittleness of the NBR adhesive [67]. Table 10 shows the effect of phenolic resin on nitrile rubber properties. On the other hand, the higher the acrylonitrile content in the rubber. 

Nickel peroxide is a solid, insoluble oxidant prepared by reaction of nickel (II) salts with hypochlorite or ozone in aqueous alkaline solution. This reagent when used in nonpolar medium is similar to, but more reactive than, activated manganese dioxide in selectively oxidizing allylic or acetylenic alcohols. It also reacts rapidly with amines, phenols, hydrazones and sulfides so that selective oxidation of allylic alcohols in the presence of these functionalities may not be possible. In basic media the oxidizing power of nickel peroxide is increased and saturated primary alcohols can be oxidized directly to carboxylic acids. In the presence of ammonia at —20°, primary allylic alcohols give amides while at elevated temperatures nitriles are formed. At elevated temperatures efficient cleavage of a-glycols, a-ketols... 

On saponification the nitrile yields perillic acid, C, H, 0, a solid body having the following characters —... 

The soft Au+ forms relatively few complexes compared with those of phosphines. Complexes with ammines, nitriles and diazoles like Au(NH3)2 and Au(RCN)2 are known but little studied. In linear Au(NH3)2, Au-N is 2.01-2.03 A [70a], [Au(NCPh)2]+ has been used as a labile source of other gold complexes [70b]. AuCl(piperidine) is a monomer with weak tetra-meric association in contrast AuX(py) (X = Cl, Br, I) are [Aupy2]+[AuX2] with a chain structure in the solid state (and Au-Au interactions), suggesting a close balance between factors for molecular and ionic structures [70c] (note also the tetrahydrothiophene complexes in section 4.10.6). 

Fluorammonium Perchlorate (Fluoroammonium Perchlorate). FNH3CIO4, mw 135.48, OB +35.4% white hygr solid, mp 104—5° with decompn sol in esters, nitriles, nitroalkanes, and tetrahydrofuran, insol in hydrocarbons and halocarbons impact sensy similar-to RDX. Prepd by the hydrolysis of et or iso-Pr N-fluoro-carbamate in a soln of anhyd perchloric ac in chlf... 

A catch and release synthesis of tetrazoles and cyclic amidines has been reported making use of solid-supported oximes [94]. When bound sulpho-nyloximes, obtained by reacting polymer supported sulfonyl chloride with oximes, were reacted with nucleophiles, tetrazoles or cychc amidines were obtained (Scheme 19). Alternatively, the use of TMS-CN affords imino nitriles, which have been used as intermediates for the preparation of indoles, 1,2,3,4-tetrahydropyridines, quinoxalines and benzimidazoles. 

Until recently the products of all nitrile cyclizations by the Thorpe reaction had been formulated as imines, although the products were found in 1955 to be better written as the enamine structure. In order to verify the reaction mechanism of the Thorpe reaction, the solid-state reaction of 84 and Bu OK was monitored by measurement of IR spectra in Nujol mulls. As the reaction proceeds (Scheme 14), the CN absorption of 84 at 2250 cm" decreases and a new CN absorption of the imine intermediate (87) arises at 2143 cm As 87 is converted into 88 by a proton migration, the CN absorption of 87 at 2143 cm" disappears, and only the CN absorption of 88 at 2189 cm remains finally [13]. 

---