Nitrile oxides isoxazoline compounds

Using nitrile oxides, various compounds and materials possessing valuable properties have been prepared. Among them are thin-film resistors useful for a thermal head and comprising a nitrile oxide, ruthenium and oxygen, a method for manufacturing the resistor by coating or deposition (529), isoxazole and/or isoxazoline polyheterocyclic systems like 458, which are useful for development of a new class of ionophores (530). 

Pyrroles from 1,4-dicarbonyl compounds and ammonia isoxazolines from olefins and nitrile oxides. 

The two major methods of preparation are the cycloaddition of nitrile oxides to alkenes and the reaction of a,/3-unsaturated ketones with hydroxylamines. Additional methods include reaction of /3-haloketones and hydroxylamine, the reaction of ylides with nitrile oxides by activation of alkyl nitro compounds from isoxazoline AT-oxides (methoxides, etc.) and miscellaneous syntheses (62HC(i7)i). 

The reaction of alkyl nitro compounds with acetyl chloride in the presence of an alkenic compound produced a 2-isoxazoline. The mechanism is believed to proceed via a nitrile oxide and is illustrated in Scheme 112 (B-79MI41613). 

Monoalkylation of Af-tosylallylamine 10 with dibromoalkane 101 proceeded in 60-90% yield (Eq. 10 see also Scheme 3 and Eq. 2) [17]. The bromoalkyl-amines 102 were converted to nitro compounds 103. In situ transformation of 103 into nitrile oxides led to spontaneous cycloaddition with formation of isox-azolines fused to 5-, 6-, and 7-membered ring heterocycles 104 a-c. Under very high dilution conditions, 103 d was converted to 104 d, an isoxazoline fused to an 8-membered azocine, in low (10%) yield. 

Primary nitro compounds are good precursors for preparing nitriles and nitrile oxides (Eq. 6.31). The conversion of nitro compounds into nitrile oxides affords an important tool for the synthesis of complex natural products. Nitrile oxides are reactive 1,3-dipoles that form isoxazolines or isoxazoles by the reaction with alkenes or alky nes, respectively. The products are also important precursors for various substrates such as P-amino alcohols, P-hydroxy ketones, P-hydroxy nitriles, and P-hydroxy acids (Scheme 6.3). Many good reviews concerning nitrile oxides in organic synthesis exist some of them are listed here.50-56 Applications of organic synthesis using nitrile oxides are discussed in Section 8.2.2. 

As discussed in Section 6.2, nitro compounds are good precursors of nitrile oxides, which are important dipoles in cycloadditions. The 1,3-dipolar cycloaddition of nitrile oxides with alkenes or alkynes provides a straightforward access to 2-isoxazolines or isoxazoles, respectively. A number of ring-cleaving procedures are applicable, such that various types of compounds may be obtained from the primary adducts (Scheme 8.18). There are many reports on synthetic applications of this reaction. The methods for generation of nitrile oxides and their reactions are discussed in Section 6.2. Recent synthetic applications and asymmetric synthesis using 1,3-dipolar cycloaddition of nitrile oxides are summarized in this section. 

Heterocycles Both non-aromatic unsaturated heterocycles and heteroaromatic compounds are able to play the role of ethene dipolarophiles in reactions with nitrile oxides. 1,3-Dipolar cycloadditions of various unsaturated oxygen heterocycles are well documented. Thus, 2-furonitrile oxide and its 5-substituted derivatives give isoxazoline adducts, for example, 90, with 2,3- and 2,5-dihydro-furan, 2,3-dihydropyran, l,3-dioxep-5-ene, its 2-methyl- and 2-phenyl-substituted derivatives, 5,6-bis(methoxycarbonyl)-7-oxabicyclo[2.2.1]hept-2-ene, and 1,4-epoxy-l,4-dihydronaphthalene. Regio- and endo-exo stereoselectivities have also been determined (259). 

A characteristic feature of contemporary investigations in the held under consideration, is the interest in cycloaddition reactions of nitrile oxides with acetylenes in which properties of the C=C bond are modified by complex formation or by an adjacent metal or metalloid atom. The use of such compounds offers promising synthetic results. In particular, unlike the frequently unselec-tive reactions of 1,3-enynes with 1,3-dipoles, nitrile oxides add chemo-, regio-and stereoselectively to the free double bond of (l,3-enyne)Co2(CO)6 complexes to provide 5-alkynyl-2-oxazoline derivatives in moderate to excellent yield. For example, enyne 215 reacts with in situ generated PhCNO to give 80% yield of isoxazoline 216 (372). 

Achiral hydantoin- and isoxazoline-substituted dispirocyclobutanoids 394 have been prepared by solid-phase synthesis (437). The facial and selective Boc-NH-mediated H-bond delivery of nitrile oxides afford dispirocyclobutanoids 394 (R = Bz, Et R1 =Ph, PI1CH2, Bu) as major compounds. 

An efficient synthetic route to (10Z)- and (10 )-19-lluoro-la,25-dihydroxy vitamin D3 has been developed (488). The key feature of this pathway is the introduction of a 19-fluoromethylene group to a (5 )-19-nor-10-oxo-vitamin D derivative. The 10-oxo compound 445 has been obtained via a 1,3-dipolar cycloaddition reaction of (5 )-la,25-dihydroxyvitamin D with in situ generated nitrile oxide, followed by ring cleavage of the formed isoxazoline moiety with molybdenum hexacarbonyl. Conversion of the keto group of (5 )-19-nor-10-oxo-vitamin D to the E and Z fluoromethylene group has been achieved via a two-step sequence, involving a reaction of lithiofluoromethyl phenyl sulfone, followed by the reductive de-sulfonylation of the u-lluoro-j3-hydroxysulfone. The dye-sensitized photoisomerization of the (5 )-19-fluorovitamin D affords the desired (5Z)-19-fluorovitamin D derivatives, (10Z)- and (10 )-19-fluoro-la,25-dihydroxy-vitamin D3. 

Several 4-(3-alkyl-2-isoxazolin-5-yl)phenol derivatives that possess liquid crystal properties have also been obtained (533-535). In particular, target compounds such as 463 (R = pentyl, nonyl) have been prepared by the reaction of 4-acetoxystyrene with the nitrile oxide derived from hexanal oxime, followed by alkaline hydrolysis of the acetate and esterification (535). A homologous series of 3-[4-alkyloxyphenyl]-5-[3,4-methylenedioxybenzyl]-2-isoxazolines, having chiral properties has been synthesized by the reaction of nitrile oxides, from the dehydrogenation of 4-alkyloxybenzaldoximes. These compounds exhibit cholesteric phase or chiral nematic phase (N ), smectic A (S4), and chiral smectic phases (Sc ), some at or just above room temperature (536). 

Isoxazolines are partially unsaturated isoxazoles. In most cases these compounds are precursors to the isoxazoles, and as a result, the synthesis can also be found in Sect. 3.2.1b. Kaffy et al., used a 1,3-dipolar cycloaddition of a nitrile oxide (186) with the respective styrene (201a or b) to generate isoxazolines (202a or b, respectively). Depending on the substitution of the vinyl portion of the styrene molecule, either 3- or 4-substituted isoxazolines could be formed (Scheme 55) [94], Simoni et al. employed similar chemistry to produce isoxazolines [60]. Kidwai and Misra emplyed microwave technology to treat chalcones with hydroxylamine and basic alumina [99]. The isoxazoles synthesized by Simoni et al. possess anti-proliferative and apoptotic activity in the micromolar range [60]. 

Using a stoichiometric amount of (i ,i )-DIPT as the chiral auxiliary, optically active 2-isoxazolines can be obtained via asymmetric 1,3-dipolar addition of achiral allylic alcohols with nitrile oxides or nitrones bearing an electron-withdrawing group (Scheme 5-53).86a Furthermore, the catalytic 1,3-dipolar cycloaddition of nitrile oxide has been achieved by adding a small amount of 1,4-dioxane (Scheme 5-53, Eq. 3).86b The presence of ethereal compounds such as 1,4-dioxane is crucial for the reproducibly higher stereoselectivity. 

From the 1980s on, many efforts were directed toward asymmetric induction of nitrile oxide cycloadditions to give pure (dia)stereoisomeric isoxazolines, and acyclic products derived from them (17,18,20-23). The need to obtain optically active cycloaddition products for use in the synthesis of natural products was first served by using chiral olefins, relying on 1,2-asymmetric induction, and then with optically active aldehydes or nitro compounds for the nitrile oxide part. In the latter case, insufficient induction occurs using chiral nitrile oxides, a problem still unsolved today. Finally, in the last 5 years, the first cases of successful asymmetric catalysis were found (29), which will certainly constitute a major area of study in the coming decade. 

Another cycloaddition to an a,(3-unsaturated compound involves the reaction of nitrile oxides with 3-methoxy- or 3-methylthio-1 -phenyl-2-propene-1 -one (Scheme 6.18) (133,134). The isoxazoles that are isolated are considered to arise from the respective intermediate isoxazolines by subsequent elimination of methanol or methanethiol. The regioselectivity observed was attributed to the presence of substituents with strong electron-donating ability, and this was accommodated in terms of the FMO theory (133,134). 

In the great major tiy of applications that use the intramolecular nitrile oxide-alkene cycloaddition, the intention is to prepare intermediates for the synthesis of natural products or related compounds. The most popular transformations of these isoxazolines are the following ring cleavage modes ... 

Intramolecular cycloadditions of alkenyl-substituted nitrile oxides produce bicyclic isoxazolines. When monocyclic olehns are used, tricyclic structures are obtained. This approach was pioneered by both Kozikowski s and Curran s groups. A typical case involves the cycloaddition of nitro compound 191 [mixture of diastereomers derived from pentenose pyranoside 190], which produced a diaster-eomeric mixture of isoxazolines that contain cis-fused rings (i.e., 192) in near quantitative yield (326) (Scheme 6.85). Further elaboration of this mixture led to epoxycyclopentano-isoxazoline 193, which was then converted to the aldol product in the usual manner. The hydrogenation proceeded well only when rhodium on alumina was used as the catalyst, giving the required p-hydroxyketone 194. This... 

The sesquiterpene skeleton has also been assembled by the intramolecular nitrile oxide cycloaddition sequence. Oxime 238 (obtained from epoxy silyl ether 237), on treatment with sodium hypochlorite gave isoxazoline 239, which was sequentially hydrolyzed and then subjected to the reductive hydrolysis conditions-cyclization sequence to give the furan derivative 240 (330) (Scheme 6.93). In three additional steps, compound 240 was converted to 241. This structure contains the C11-C21 segment of the furanoterpene ent-242, that could be obtained after several more steps (330). 

One of the very first uses of the intramolecular nitrile oxide cycloaddition involved the synthesis of macrocyclic lactones. Asaoka et al. (238) conceived this approach to the 16-membered ring antibiotic A26771B (277). Nitro compound 274 [obtained from 11-acetoxydodecanal (273)] was dehydrated with 4-chlorophenyl isocyanate-triethylamine and this was followed by dipolar cycloaddition, which gave isoxazoline 275 as a 4 1 mixture of diastereomers (Scheme 6.100). 

Dipolar cycloaddition reactions between nitrile oxides and aUcenes produce 2-isoxazolines. Through reductive cleavage of the N—O bond of the 2-isoxazohnes, the resulting heterocycles can be readily transformed into a variety of important synthetic intermediates such as p-hydroxy ketones (aldols), p-hydroxy esters, a,p-unsaturated carbonyl compounds, y-amino alcohols, imino ketones and so forth (7-12). 

For alkenyl nitrile oxides having the alkene in a cyclic structure, such as compound 141, high diastereoselectivities can be obtained (Scheme 12.47). Compound 141 is formed in situ, and undergoes a spontaneous cyclization to furnish 142 as the sole diastereomer. Toyota et al. (239) used the tricyclic isoxazoline 143 in the synthesis of (+)-pumiliotoxin C. 

Aliphatic nitro compounds are versatile building blocks and intermediates in organic synthesis,14 15 cf. the overview given in the Organic Syntheses preparation of nitroacetaldehyde diethyl acetal.16 For example, Henry and Michael additions, respectively, lead to 1,2- and 1,4-difunctionalized derivatives.14 18 1,3-Difunctional compounds, such as amino alcohols or aldols are accessible from primary nitroalkanes by dehydration/1,3-dipolar nitrile oxide cycloaddition with olefins (Mukaiyama reaction),19 followed by ring cleavage of intermediate isoxazolines by reduction or reduction/hydrolysis.20 21... 

An early example of this type of transformation was described in 1964 by Drehfahl and Horhold (310). These authors prepared racemic 4-hydroxyproline, albeit with low diastereoselectivity for the isoxazoline reduction step [Scheme 6.75, (1)] (310). Much higher selectivity was achieved using 5-halomethylisoxazolines bearing a 3-(l-oxyalkyl) side chain, which was introduced from the nitrile oxide portion. The examples presented in Scheme 6.75 outline the synthesis of 4-hydroxy-pyrrolidines, which contain a dioxyethyl or trioxypropyl side chain. Both of these substrates were converted into the corresponding imino acids of 4-hydroxyproline (23,225,234) and 4, 1 -dihydroxyhomoproline, respectively (23,207,225) (Eq. 2, 3). The latter compound is part of an N-Val dipeptide structure, that was mistakenly proposed for the antibiotic Tii 1718B (311,312). 

---