Nitrile oxides double bonds

Highly saturated nitrile elastomers (HSN) have become available. These mbbers are prepared by (nearly complete) hydrogenation of the nitrile mbber copolymer. The resulting product has better heat and oxidation resistance than conventional nitrile mbber but still retains some double bonds for vulcanization. Trade names for HSN are Zetpol (Nippon Zeon), Therbar (Bayer), and Tormac (Polysar). HSN has been used, and is being developed, for oil field chemical, automotive, power station, aerospace, military, and industrial appHcations (66). 

Dihydrofuran (376) and 2,5-dihydrofuran (377) react with nitrile oxides to give furo[2,3-6 ]isoxazoles (378) and furo[3,4-rf]isoxazoles (379), respectively, as cycloadducts. The double bonds of furan, pyrrole and thiophene also react when the nitrile oxide is generated in situ. Thus furan and benzonitrile oxide gave (380), and with 2-methyl-2-oxazoline the cycloadduct (381) was obtained (71AG(E)810). These and related cycloadditions are discussed in Chapter 4.36. 

In theory, three isoxazolines are capable of existence 2-isoxazoline (2), 3-isoxazoline and 4-isoxazoline. The position of the double bond may also be designated by the use of the prefix A with an appropriate numerical superscript. Of these only the 2-isoxazolines have been investigated in any detail. The preparation of the first isoxazoline, 3,5-diphenyl-2-isoxazoline, from the reaction of )3-chloro-)3-phenylpropiophenone with hydroxylamine was reported in 1895 (1895CB957). Two major syntheses of 2-isoxazolines are the cycloaddition of nitrile A-oxides to alkenes and the reaction of a,/3-unsaturated ketones with hydroxylamine. Since 2-isoxazolines are readily oxidized to isoxazoles and possess some of the unique properties of isoxazoles, they also serve as key intermediates for the synthesis of other heterocycles and natural products. 

Nitrile oxides react with a wide variety of alkenic compounds and this reaction may be complicated by dimerization of the nitrile oxide to furoxan in the presence of unreactive double bonds (Scheme 98). 

The cycloaddition of nitrile oxides 574 to vinyl sulphoxides usually produces a mixture of regio- and diastereoisomers. Their ratio is dependent on the nitrile oxide used and the configuration around the double bond in the starting sulphoxide (equation 365)673. 

The reaction of the a-bromo aldoxime 52e (R = R = Me) with unsaturated alcohols has been extended to the heterocyclic systems furfuryl alcohols and 2-thiophene methanol [29b]. The furanyl and thiophenyl oximes 63a-c were treated with NaOCl and the resulting heterocyclic nitrile oxides were found to undergo spontaneous intramolecular dipolar cycloaddition to produce the unsaturated tricyclic isoxazolines 64a-c in high yield (Eq. 5). In these cases, the heterocyclic ring acts as the dipolarophile with one of the double bonds adding to the nitrile oxide [30]. 

A positive feature of the reaction is that nitrile oxides are more regioselective, in cycloadditions to methylenecyclopropanes, compared to nitrones. Only traces (up to 5%) of the 4-spirocyclopropane regioisomers are generally observed with methylenecyclopropanes unsubstituted on the exocyclic double bond. The yields are only moderate, but higher with more stable nitrile oxides (Table 27, entries 5, 6, 10-12). 

Adducts 380-383 of nitrile oxides to highly hindered bicyclopropylidene (3) can be obtained, despite the lower reactivity of the tetrasubstituted double bond which reduces the yields favoring the dimerization of reactive nitrile oxides (Table 31, entries 1-2) [80a, b]. 

One obvious synthetic route to isoxazoles and dihydroisoxazoles is by [3+2] cycloadditions of nitrile oxides with alkynes and alkenes, respectively. In the example elaborated by Giacomelli and coworkers shown in Scheme 6.206, nitroalkanes were converted in situ to nitrile oxides with 1.25 equivalents of the reagent 4-(4,6-di-methoxy[l,3,5]triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) and 10 mol% of N,N-dimethylaminopyridine (DMAP) as catalyst [373], In the presence of an alkene or alkyne dipolarophile (5.0 equivalents), the generated nitrile oxide 1,3-dipoles undergo cycloaddition with the double or triple bond, respectively, thereby furnishing 4,5-dihydroisoxazoles or isoxazoles. For these reactions, open-vessel microwave conditions were chosen and full conversion with very high isolated yields of products was achieved within 3 min at 80 °C. The reactions could also be carried out utilizing a resin-bound alkyne [373]. For a related example, see [477]. 

In the scope of this subsection, competitive 1,3-cycloaddition of nitrile oxides to carbon-carbon and carbon-heteroatom multiple bonds are of special interest. Competition between carbon-carbon and carbon-nitrogen double bonds in... 

Intermolecular Cycloaddition at the C=C Double Bond Addition at the C=C double bond is the main type of 1,3-cycloaddition reactions of nitrile oxides. The topic was treated in detail in Reference 157. Several reviews appeared, which are devoted to problems of regio- and stereoselectivity of cycloaddition reactions of nitrile oxides with alkenes. Two of them deal with both inter- and intramolecular reactions (158, 159). Important information on regio-and stereochemistry of intermolecular 1,3-dipolar cycloaddition of nitrile oxides to alkenes was summarized in Reference 160. 

Cycloaddition with nitrile oxides occur with compounds of practically any type with a C=C bond alkenes and cycloalkenes, their functional derivatives, dienes and trienes with isolated, conjugated or cumulated double bonds, some aromatic compounds, unsaturated and aromatic heterocycles, and fullerenes. The content of this subsection is classified according to the mentioned types of dipolarophiles. Problems of relative reactivities of dienophiles and dipoles, regio- and stereoselectivity of nitrile oxide cycloadditions were considered in detail by Jaeger and... 

Cycloaddition of 2-alkoxy-l,3-butadienes, H2C=C(OAlk)CH=CH2, and nitrile oxides to give isoxazolines 51 proceeds with the participation of only one of the conjugated C=C bonds. With benzonitrile oxide, only the vinyl group in alkoxydienes participates in cycloaddition reactions while in the case of phenyl-glyoxylonitrile oxide both double bonds react (222). Nitrile oxides RC=NO react with iron complexed trienes 52. The reaction proceeds with good yield and diastereoselectivity ( 90/10) to give isoxazolines 53 (223). 

Allenes add nitrile oxides either to one or two double bonds. For mono- and 1,1-disubstituted allenes, relative activity of the two bonds depends on the nature of substituents. The reaction (Scheme 1.18) of N-propadienylanilines 54 with 3,5-dichloro-2,4,6-trimethylbenzonitrile oxide proceeds site- and regioselectively to give 5-substituted 4-methylene-4,5-dihydroisoxazoles 55, which add a second molecule of nitrile oxide to afford 4,5/-spirobi-(4,5-dihydroisoxazoles) 56. Dihy-droisoxazoles 55 isomerize to 4-(2-aminobenzyl)isoxazoles 57 via a Claisen-type rearrangement (224). 

Allenyl sulfides RSCH=C=CH2 and the same nitrile oxide undergo cycloadditions which occur exclusively or predominantly at the external double bond to give 4-alkylidenedihydroisoxazoles 58 and 5-(methylthio)isoxazoles 59 (226). 

Selective nitrile oxide addition at the internal C(4)=Ca double bond, to give the spiro compound, is described for 4-vinylideneoxazolidin-2-one (228). 

Dimethyl 7-10-tetrahaptotricyclo[4.2.2.02 5]deca-3,7,9-triene-7,8-dicarboxy-late tricarbonyliron reacted readily with several 1,3-dipoles nitrile oxides, at the cyclobutene double bond, to give adducts from which the tricarbonyliron group could be easily removed by oxidative decomplexation with trimethylamine N-oxide (237). 

The cycloaddition of nitrile oxides RCNO (R = alkyl, alkenyl, aryl), generated in situ from either RCH2NO2/PI1NCO or RCH=NOH/NaOCl to (R)-( + )-limonene, proceeds regioselectively at the extracyclic double bond, but not stereospecifically, to form (5R/S )-isoxazoles 78 in 64% to 81% isolated yield (241). 

Nitrile oxides react with cycloheptatriene and its tricarbonyliron complex to give mixtures of adducts. In particular, for the complex, these adducts are 84, 85 (regioisomers at the uncomplexed double bond) and bisadduct 86. The regiose-lectivity of the reactions of cycloheptatriene is similar to that of the reactions of its tricarbonyliron derivative (246). 

Dipolar cycloaddition of 2,4-(trimethylsilyl)- and 2,4-(trimethylgermyl)-substituted thiophene-1,1-dioxides as well as silylated 2,2 -bithiophene-1,1-dioxides was investigated. It was shown that only the C(4)=C(5) double bond of 2,4-disubstituted thiophene-1,1-dioxides interacts with acetonitrile oxide to give thienoisoxazoline dioxides. Bithiophene derivatives were inactive or their reaction with nitrile oxide was accompanied by desilylation. Cycloaddition of benzonitrile oxide with all mentioned sulfones did not occur. The molecular structure of 3a-methyl-5.6a-bis(trimethylgermyl)-3a,6a-dihydrothieno 2.3-c/ isoxazole 4,4-dioxide was established by X-ray diffraction (263). ... 

Cycloaddition reactions of nitrile oxides with 5-unsubstituted 1,4-dihydro-pyridine derivatives produced isoxazolo[5,4-Z>]pyridines in moderate to good yield. In each case examined, the reaction produced only a single isomer, the structure of which was assigned by NMR spectra and confirmed by X-ray diffraction analysis of 102 (270). A study of the cycloaddition behavior of substituted pyridazin-3-ones with aromatic nitrile oxides was carried out (271). Nitrile oxides undergo position and regioselective 1,3-dipolar cycloaddition to the 4,5-double bond of pyridazinone to afford 3a,7a-diliydroisoxazolo 4,5-<7]pyridazin-4-ones, for example, 103. 

Dimethyl-3-methylenepyrrolidine-2-thione, which reacts with nitrones regio- and stereoselectively at its exocyclic C=C bond to give only spirocy-cloadducts 116, behaves more complicatedly with nitrile oxides. The latter undergo 1,3-dipolar cycloaddition both to the exocyclic C=C and C=S double bonds with subsequent cycloreversion and formation of spiro-lactams 117 (281). 

I.3.4.2. Intermolecular Cycloaddition at C=X or X=Y Bonds Cycloaddition reactions of nitrile oxides to double bonds containing heteroatoms are well documented. In particular, there are several reviews concerning problems both of general (289) and individual aspects. They cover reactions of nitrile oxides with cumulene structures (290), stereo- and regiocontrol of 1,3-dipolar cycloadditions of imines and nitrile oxides by metal ions (291), cycloaddition reactions of o-benzoquinones (292, 293) and aromatic seleno aldehydes as dipolarophiles in reactions with nitrile oxides (294). 

Some features are characteristic of reactions of nitrile oxides with 2,4,6-cyclo-hep tatrien-l-imines (8-azaheptafulvenes). 1,3-Dipolar cycloaddition to the C=N double bond of N-aryl-2,4,6-cycloheptatrien-l-imines 142 (R = Ar), affording... 

Reactions of stable mesito- and duronitrile oxides with 1-chloroalkyl isocyanates R R2CC1NC0 (R1 = CF3, R2 = Ph, 4-MeC6H4 R1 = CC13, R2 = H) gave oxadiazolones 176. The double adducts are formed by the cycloaddition of one nitrile oxide molecule at the isocyanate C=N bond and the nucleophilic addition of the chloroalkyl moiety to a second nitrile oxide molecule (344). 

I.3.4.2.6. Compounds with Unusual Double Bonds 1,3-Dipolar cycloaddition of l-chloro-2-phenyl-2-trimetkylsilyl-l-phosphaethene with nitrile oxides, followed by elimination of Me SiCl, results in 3,5-diphenyl-l,4,2-oxaphosphazole 190 (356). Chromium, molybdenum, and tungsten pentacarbonyls of 3,5-diphenyl-).3-phosphinins react with nitrile oxides to give the corresponding 1,3-dipolar cycloadducts, at the P = C bond, see 191 (Ar = Ph, Mes) (357). 

A characteristic feature of contemporary investigations in the held under consideration, is the interest in cycloaddition reactions of nitrile oxides with acetylenes in which properties of the C=C bond are modified by complex formation or by an adjacent metal or metalloid atom. The use of such compounds offers promising synthetic results. In particular, unlike the frequently unselec-tive reactions of 1,3-enynes with 1,3-dipoles, nitrile oxides add chemo-, regio-and stereoselectively to the free double bond of (l,3-enyne)Co2(CO)6 complexes to provide 5-alkynyl-2-oxazoline derivatives in moderate to excellent yield. For example, enyne 215 reacts with in situ generated PhCNO to give 80% yield of isoxazoline 216 (372). 

The study of the intramolecular nitrile oxide—allene cycloaddition shows, in particular, that dehydration of nitroallene 339 by PhNCO, generates a nitrile oxide in situ, which gives isoxazoline 340 (Scheme 1.36). Thus, the reaction of the more remote double bond with the formation of six-membered ring prevails (405). 

The intramolecular cycloaddition reactions of the nitrile oxides 357 (n = 1, 2, 3, 9), obtained in situ from the 2,5-difunctional furan hydroximoyl chlorides or nitro compounds (415) has specific features because of the 2,5-arrangement of two open chains bearing acetylenic and fulminic moieties. Only with 357 (n = 3) is the expected furanoisoxazolophane 358 formed, in acceptable yield. Compound 357 ( =9) gives a complex product mixture whereas 357 ( = 1, 2) gives rise to the exclusive reaction of the dipole with a double bond of the furan system. 

The 1,3-dipolar addition to terminal alkenes of nitrile oxides, generated from nitromethylene derivatives of bicycloheptane, provides 9,ll-ethano-13,15-isoxazolinoprostanoids, PGH analogs, with alkyl, phenyl, or additional heterocyclic fragment in the oo-chain (461). Chemical transformations of 9,11-ethano-13,15-isoxazolinoprostanoids furnish prostanoids with bifunctional fragments of P-hydroxyketone and a-aminoalcohol in the oo-chain. The reaction of P-hydroxy ketones with methanesulfonyl chloride gives rise to prostanoids with an enone component in the oo-chain. 9,ll-Ethano-16-thiaprostanoids have been prepared, for the first time, by nucleophilic addition of thiols to the polarized double bond in the oo-chain. The 1,3-dipolar addition to terminal alkenes of nitrile oxides, generated from nitromethylene derivatives of bicycloheptane provides 9,ll-ethano-13,15-isoxazolinoprostanoids with an alkyl, phenyl, or additional heterocyclic fragment in the oo-chain (462). 

---