Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Nitrile cycloadditions, isoxazolines

Nitrile oxides (R-C=N -0 ), which can be generated by elimination of hydrogen chloride from chlorooximes (RC(Cl)=NOH), or by dehydration of nitro compounds (RCH2NO2), readily add to alkenes and to alkynes generating five-membered heterocycles. Addition to an alkene produces a dihydroisoxazole (isoxazoline), unless the alkene also incorporates a group capable of being eliminated in a step after the cycloaddition isoxazolines can sometimes be dehydrogenated to the aromatic system. ... [Pg.404]

In theory, three isoxazolines are capable of existence 2-isoxazoline (2), 3-isoxazoline and 4-isoxazoline. The position of the double bond may also be designated by the use of the prefix A with an appropriate numerical superscript. Of these only the 2-isoxazolines have been investigated in any detail. The preparation of the first isoxazoline, 3,5-diphenyl-2-isoxazoline, from the reaction of )3-chloro-)3-phenylpropiophenone with hydroxylamine was reported in 1895 (1895CB957). Two major syntheses of 2-isoxazolines are the cycloaddition of nitrile A-oxides to alkenes and the reaction of a,/3-unsaturated ketones with hydroxylamine. Since 2-isoxazolines are readily oxidized to isoxazoles and possess some of the unique properties of isoxazoles, they also serve as key intermediates for the synthesis of other heterocycles and natural products. [Pg.3]

Nitrile A-oxides, under reaction conditions used for the synthesis of isoxazoles, display four types of reactivity 1,3-cycloaddition 1,3-addition nucleophilic addition and dimerization. The first can give isoxazolines and isoxazoles directly. The second involves the nucleophilic addition of substrates to nitrile A-oxides and can give isoxazolines and isoxazoles indirectly. The third is the nucleophilic addition of undesirable nucleophiles to nitrile A-oxides and can be minimized or even eliminated by the proper selection of substrates and reaction conditions. The fourth is an undesirable side reaction which can often be avoided by generating the nitrile A-oxide in situ and by keeping its concentration low and by using a reactive acceptor (70E1169). [Pg.66]

A -Isoxazolines are readily available from the 1,3-dipolar cycloaddition of nitrile -oxides with alkenes and from the condensation reaction of ehones with hydroxylamine. Therefore, methods of conversion of -isoxazolines into isoxazoles are of particular interest and of synthetic importance. [Pg.78]

The two major methods of preparation are the cycloaddition of nitrile oxides to alkenes and the reaction of a,/3-unsaturated ketones with hydroxylamines. Additional methods include reaction of /3-haloketones and hydroxylamine, the reaction of ylides with nitrile oxides by activation of alkyl nitro compounds from isoxazoline AT-oxides (methoxides, etc.) and miscellaneous syntheses (62HC(i7)i). [Pg.88]

Nitronates derived from primary nitroalkanes can be regarded as a synthetic equivalent of nitrile oxides since the elimination of an alcohol molecule from nitronates adds one higher oxidation level leading to nitrile oxides. This direct / -elimination of nitronates is known to be facilitated in the presence of a Lewis acid or a base catalyst [66, 72, 73]. On the other hand, cycloaddition reactions of nitronates to alkene dipolarophiles produce N-alkoxy-substituted isoxazolidines as cycloadducts. Under acid-catalyzed conditions, these isoxazolidines can be transformed into 2-isoxazolines through a ready / -elimination, and 2-isoxazolines correspond to the cycloadducts of nitrile oxide cycloadditions to alkenes [74]. [Pg.272]

Accordingly, cyclic nitronates can be a useful synthetic equivalent of functionalized nitrile oxides, while reaction examples are quite limited. Thus, 2-isoxazoline N-oxide and 5,6-dihydro-4H-l,2-oxazine N-oxide, as five- and six-membered cyclic nitronates, were generated in-situ by dehydroiodination of 3-iodo-l-nitropropane and 4-iodo-l-nitrobutane with triethylamine and trapped with monosubstituted alkenes to give 5-substituted 3-(2-hydroxyethyl)isoxazolines and 2-phenylperhydro-l,2-oxazino[2,3-fe]isoxazole, respectively (Scheme 7.26) [72b]. Upon treatment with a catalytic amount of trifluoroacetic acid, the perhydro-l,2-oxazino[2,3-fe]isoxazole was quantitatively converted into the corresponding 2-isoxazoline. Since a method for catalyzed enantioselective nitrone cycloadditions was established and cyclic nitronates should behave like cyclic nitrones in reactivity, there would be a good chance to attain catalyzed enantioselective formation of 2-isoxazolines via nitronate cycloadditions. [Pg.272]

A two-step sequence of nitrile oxide-olehn cycloaddition and reduction of the resulting A -isoxazolines offers a unique and attractive alternative to the classical aldol reaction and its many variants (2J). The procedure bypasses traditional problems, including enolate equilibrium and cross condensation (20). [Pg.141]

The intramolecular cycloaddition of a nitrile oxide (a 1,3-dipole) to an alkene is ideally suited for the regio- and stereocontrolled synthesis of fused polycyclic isoxazolines.16 The simultaneous creation of two new rings and the synthetic versatility of the isoxa-zoline substructure contribute significantly to the popularity of this cycloaddition process in organic synthesis. In spite of its high degree of functionalization, aldoxime 32 was regarded as a viable substrate for an intramolecular 1,3-dipolar cycloaddition reaction. Indeed, treatment of 32 (see Scheme 17) with sodium hypochlorite... [Pg.550]

The reaction of the a-bromo aldoxime 52e (R = R = Me) with unsaturated alcohols has been extended to the heterocyclic systems furfuryl alcohols and 2-thiophene methanol [29b]. The furanyl and thiophenyl oximes 63a-c were treated with NaOCl and the resulting heterocyclic nitrile oxides were found to undergo spontaneous intramolecular dipolar cycloaddition to produce the unsaturated tricyclic isoxazolines 64a-c in high yield (Eq. 5). In these cases, the heterocyclic ring acts as the dipolarophile with one of the double bonds adding to the nitrile oxide [30]. [Pg.10]

Monoalkylation of Af-tosylallylamine 10 with dibromoalkane 101 proceeded in 60-90% yield (Eq. 10 see also Scheme 3 and Eq. 2) [17]. The bromoalkyl-amines 102 were converted to nitro compounds 103. In situ transformation of 103 into nitrile oxides led to spontaneous cycloaddition with formation of isox-azolines fused to 5-, 6-, and 7-membered ring heterocycles 104 a-c. Under very high dilution conditions, 103 d was converted to 104 d, an isoxazoline fused to an 8-membered azocine, in low (10%) yield. [Pg.16]

A regio- and stereospecific INOC reaction of unsymmetrical silaketals 114, synthesized in one pot from unsaturated alcohols, nitro ethanol, and dichloro-silanes, via the nitrile oxide 115 to isoxazolines 116 has been described (Scheme 14) [37a]. The intermolecular version of the cycloaddition, under similar conditions, proceeds with poor regio and stereoselectivity. [Pg.16]

Although nitrile oxide cycloadditions have been extensively investigated, cycloadditions of silyl nitronates, synthetic equivalent of nitrile oxides in their reactions with olefins, have not received similar attention. Since we found that the initial cycloadducts, hl-silyloxyisoxazolidines, are formed with high degree of stereoselectivity and can be easily transformed into isoxazolines upon treatment with acid or TBAF, intramolecular silylnitronate-olefin cycloadditions (ISOC) have emerged as a superior alternative to their corresponding INOC reactions [43]. Furthermore, adaptability of ISOC reactions to one-pot tandem sequences involving 1,4-addition and ISOC as the key steps has recently been demonstrated [44]. [Pg.21]

As discussed in Section 6.2, nitro compounds are good precursors of nitrile oxides, which are important dipoles in cycloadditions. The 1,3-dipolar cycloaddition of nitrile oxides with alkenes or alkynes provides a straightforward access to 2-isoxazolines or isoxazoles, respectively. A number of ring-cleaving procedures are applicable, such that various types of compounds may be obtained from the primary adducts (Scheme 8.18). There are many reports on synthetic applications of this reaction. The methods for generation of nitrile oxides and their reactions are discussed in Section 6.2. Recent synthetic applications and asymmetric synthesis using 1,3-dipolar cycloaddition of nitrile oxides are summarized in this section. [Pg.258]

Isoxazolines are good precursors of a,(3-unsaturated ketones.63,94 This transformation is useful for synthesis of polyenes. For example, nitrile oxide cycloaddition chemistry is used to prepare 4-oxo-2-alkenylphosphonates, which are useful to synthesize a long polyethylenic unit via Woodworth-Emmons olefination (Eq. 8.66).101... [Pg.260]

Alkyl and silyl nitronates are, in principle, /V-alkoxy and /V-silyloxynitrones, and they can react with alkenes in 1,3-dipolar cycloadditions to form /V-alkoxy- or /V-silyloxyisoxaz.olidine (see Scheme 8.25). The alkoxy and silyloxy groups can be eliminated from the adduct on heating or by acid treatment to form 2-isoxazolines. It should be noticed that isoxazolines are also obtained by the reaction of nitrile oxides with alkenes thus, nitronates can be considered as synthetic equivalents of nitrile oxides. Since the pioneering work by Torssell et al. on the development of silyl nitronates, this type of reaction has become a useful synthetic tool. Recent development for generation of cyclic nitronates by hetero Diels-Alder reactions of nitroalkenes is discussed in Section 8.3. [Pg.267]

Hassner and coworkers have developed a one-pot tandem consecutive 1,4-addition intramolecular cycloaddition strategy for the construction of five- and six-membered heterocycles and carbocycles. Because nitroalkenes are good Michael acceptors for carbon, sulfur, oxygen, and nitrogen nucleophiles (see Section 4.1 on the Michael reaction), subsequent intramolecular silyl nitronate cycloaddition (ISOC) or intramolecular nitrile oxide cycloaddition (INOC) provides one-pot synthesis of fused isoxazolines (Scheme 8.26). The ISOC route is generally better than INOC route regarding stereoselectivity and generality. [Pg.270]

Isoxazole (as well as isoxazoline, and isoxazolidine) analogues of C-nucleosides related to pseudouridines 25 and 27 have been regioselectively synthesized by 1,3-dipolar cycloaddition (1,3-DC) of nitrile oxides (and nitrones) derived from uracyl-5-carbaldehyde 24 and 2,4-dimethoxypyrimidine-5-carbaldehyde 26 respectively <06T1494>. [Pg.290]

Polymeric isoxazolines were prepared by cycloaddition of nitrile oxides to norbomadiene followed by ring-opening metathesis polymerization (ROMP) <06PLM3292 06MM3147>. [Pg.292]

Isoxazolines 38 and 39 were obtained in different ratios by direct cycloaddition of 4-t-butylbenzonitrile oxide with acids 35 (R = H, path B) and by the intermediate formation of cyclodextrin derivatives 36 and 37 followed by basic hydrolysis and acidification (path A). The reversed regioselectivity as well as an increased rate of the cycloaddition step could be explained through the temporary association of the nitrile oxide with the cyclodextrin to give the inclusion complex 40 <06CEJ8571>. [Pg.292]

Glycosyl nitrile oxides 315, generated in situ by reaction of hydroxamoyl chlorides with DBU, participate in 1,3-dipolar cycloaddition with substituted alkenes leading to glycosyl isoxazolines the l,2,5-oxadiazole-2-oxides 316 are isolated as by-products in low yields (Scheme 79) <2004CHC353>. [Pg.378]

Thermolysis of a stable radical 4-[(hydroxyimino)nitromethyl]-2,2,5,5-tetra-methyl-3-imidazolin-l-oxyl 13 gives the corresponding spin-labeled nitrile oxide. It was also identified in isoxazolines formed in cycloadditions with olefins (88). [Pg.9]

Individual aspects of nitrile oxide cycloaddition reactions were the subjects of some reviews (161 — 164). These aspects are as follows preparation of 5-hetero-substituted 4-methylene-4,5-dihydroisoxazoles by nitrile oxide cycloadditions to properly chosen dipolarophiles and reactivity of these isoxazolines (161), 1,3-dipolar cycloaddition reactions of isothiazol-3(2//)-one 1,1-dioxides, 3-alkoxy- and 3-(dialkylamino)isothiazole 1,1-dioxides with nitrile oxides (162), preparation of 4,5-dihydroisoxazoles via cycloaddition reactions of nitrile oxides with alkenes and subsequent conversion to a, 3-unsaturated ketones (163), and [2 + 3] cycloaddition reactions of nitroalkenes with aromatic nitrile oxides (164). [Pg.21]

This regioselectivity is practically not influenced by the nature of subsituent R. 3,5-Disubstituted isoxazolines are the sole or main products in [3 + 2] cycloaddition reactions of nitrile oxides with various monosubstituted ethylenes such as allylbenzene (99), methyl acrylate (105), acrylonitrile (105, 168), vinyl acetate (168) and diethyl vinylphosphonate (169). This is also the case for phenyl vinyl selenide (170), though subsequent oxidation—elimination leads to 3-substituted isoxazoles in a one-pot, two-step transformation. 1,1-Disubstituted ethylenes such as 2-methylene-1 -phenyl-1,3-butanedione, 2-methylene-1,3-diphenyl- 1,3-propa-nedione, 2-methylene-3-oxo-3-phenylpropanoates (171), 2-methylene-1,3-dichlo-ropropane, 2-methylenepropane-l,3-diol (172) and l,l-bis(diethoxyphosphoryl) ethylene (173) give the corresponding 3-R-5,5-disubstituted 4,5-dihydrooxazoles. [Pg.22]


See other pages where Nitrile cycloadditions, isoxazolines is mentioned: [Pg.371]    [Pg.295]    [Pg.443]    [Pg.10]    [Pg.69]    [Pg.95]    [Pg.89]    [Pg.74]    [Pg.273]    [Pg.534]    [Pg.551]    [Pg.264]    [Pg.289]    [Pg.82]    [Pg.218]    [Pg.6]    [Pg.20]    [Pg.20]   
See also in sourсe #XX -- [ Pg.6 ]




SEARCH



2-Isoxazoline, cycloaddition

Isoxazoline

Isoxazolines

Nitriles cycloaddition

Nitriles cycloadditions

© 2024 chempedia.info