Intramolecular cycloadditions additions

Simple olefins do not usually add well to ketenes except to ketoketenes and halogenated ketenes. Mild Lewis acids as well as bases often increase the rate of the cyclo addition. The cycloaddition of ketenes to acetylenes yields cyclobutenones. The cycloaddition of ketenes to aldehydes and ketones yields oxetanones. The reaction can also be base-cataly2ed if the reactant contains electron-poor carbonyl bonds. Optically active bases lead to chiral lactones (41—43). The dimerization of the ketene itself is the main competing reaction. This process precludes the parent compound ketene from many [2 + 2] cyclo additions. Intramolecular cycloaddition reactions of ketenes are known and have been reviewed (7). 

When additional substituents are introduced in the 2- and/or 4-position, the thermal rearrangement gives products in which the substituents that were originally located in the 1- and 5-position of the quadricyclane are then located at C4 and C5 of the oxepin 7.30,123 In order to trap intermediates of this rearrangement reaction by intramolecular cycloaddition vinyl and acetylene groups were linked with different spacer groups to C2 of quadricyclane.123 In this manner two different intramolecular cycloadducts were isolated in addition to oxepin derivatives.123... 

Another example of a [4S+1C] cycloaddition process is found in the reaction of alkenylcarbene complexes and lithium enolates derived from alkynyl methyl ketones. In Sect. 2.6.4.9 it was described how, in general, lithium enolates react with alkenylcarbene complexes to produce [3C+2S] cycloadducts. However, when the reaction is performed using lithium enolates derived from alkynyl methyl ketones and the temperature is raised to 65 °C, a new formal [4s+lcj cy-clopentenone derivative is formed [79] (Scheme 38). The mechanism proposed for this transformation supposes the formation of the [3C+2S] cycloadducts as depicted in Scheme 32 (see Sect. 2.6.4.9). This intermediate evolves through a retro-aldol-type reaction followed by an intramolecular Michael addition of the allyllithium to the ynone moiety to give the final cyclopentenone derivatives after hydrolysis. The role of the pentacarbonyltungsten fragment seems to be crucial for the outcome of this reaction, as experiments carried out with isolated intermediates in the absence of tungsten complexes do not afford the [4S+1C] cycloadducts (Scheme 38). 

Scheme 6.8 gives some examples of ketene-alkene cycloadditions. In Entry 1, dimethylketene was generated by pyrolysis of the dimer, 2,2,4,4-tetramethylcyclobutane-l,3-dione and passed into a solution of the alkene maintained at 70° C. Entries 2 and 3 involve generation of chloromethylketene by dehydrohalo-genation of a-chloropropanoyl chloride. Entry 4 involves formation of dichloroketene. Entry 5 is an intramolecular addition, with the ketene being generated from a 2-pyridyl ester. Entries 6, 7, and 8 are other examples of intramolecular ketene additions. 

Given their extraordinary reactivity, one might assume that o-QMs offer plentiful applications as electrophiles in synthetic chemistry. However, unlike their more stable /tora-quinone methide (p-QM) cousin, the potential of o-QMs remains largely untapped. The reason resides with the propensity of these species to participate in undesired addition of the closest available nucleophile, which can be solvent or the o-QM itself. Methods for o-QM generation have therefore required a combination of low concentrations and high temperatures to mitigate and reverse undesired pathways and enable the redistribution into thermodynamically preferred and desired products. Hence, the principal uses for o-QMs have been as electrophilic heterodienes either in intramolecular cycloaddition reactions with nucleophilic alkenes under thermodynamic control or in intermolecular reactions under thermodynamic control where a large excess of a reactive nucleophile thwarts unwanted side reactions by its sheer vast presence. 

Hofmann degradation of the nonnatural protoberberine 454 afforded the 10-membered ring base 455 (65%) in addition to the styrene-type compound (13%) (Scheme 92). Dihydroxylation of the former with N-bromosuccinimide in the presence of a large excess of hydrochloric acid and subsequent oxidation of the product diol 456 with periodic acid afforded the dialdehyde 457. On irradiation in tert-butyl alcohol 457 provided ( )-cis-alpinigenine (445) along with ( )-alpinigenine (441) as a result of endo and exo intramolecular cycloaddition, respectively, of the intermediate photodienol (221,222). 

Reductions of y-nitroketones yield cyclic nitrones, which undergo inter- and intramolecular cycloaddition to various alkenes. The result of addition to acrylonitrile is shown in Eq. 8.42, in which a mixture of regio- and stereoisomers is formed.65... 

Diastereoselective intramolecular cycloaddition of nitrones is useful for constructing nitrogen- containing cyclic structures. The reaction serves as a key step in a number of natural product syntheses.63 Tufarriello and coworkers have used this strategy for preparing cocaine and other alkaloids.74 As a classical example, enantioselective total synthesis of (+)-luciduline is presented in Scheme 8.13, in which a useful feature of the 1,3-dipolar addition of nitrones is nicely illustrated.75... 

Hassner and coworkers have developed a one-pot tandem consecutive 1,4-addition intramolecular cycloaddition strategy for the construction of five- and six-membered heterocycles and carbocycles. Because nitroalkenes are good Michael acceptors for carbon, sulfur, oxygen, and nitrogen nucleophiles (see Section 4.1 on the Michael reaction), subsequent intramolecular silyl nitronate cycloaddition (ISOC) or intramolecular nitrile oxide cycloaddition (INOC) provides one-pot synthesis of fused isoxazolines (Scheme 8.26). The ISOC route is generally better than INOC route regarding stereoselectivity and generality. 

Naphthalene and substituted naphthalenes add to olefins 444) (4.39) and to acetylenes445) (4.40) to give 1,2-adducts. In the latter case the primary addition product undergoes a further [2 + 2]intramolecular cycloaddition. 

A diastereoselective synthesis of bis(3,5)pyrazolophanes was accomplished by sequential inter- and intramolecular cycloadditions of homochiral nitrilimine intermediates . A-Alkyl pyrazolidine-3,5-diones were synthesized in a three-step sequence from dialkyl malonates <00JHC1209>. Methyl acetoacetate was employed as the initial substrate to 3-carboxamido-4-pyrazolecatboxylic acid derivatives <00JHC175>. Vilsmeier type reagent 33 reacted with imines 34 to afford enaminoimine hydrochlorides 35, which were transformed to pyrazoles 36 upon addition of hydrazine <0OJHC13O9>. 

The sequential intramolecular conjugate addition of the oxime followed by intramolecular dipolar cycloaddition of the intermediate nitrone affords a... 

The tandem intramolecular Michael addition and 1,3-cycloaddition reactions of the corresponding alkenyl oxime have been used for the synthesis of the tricyclic core of the alkaloid halichlorine (Scheme 2.232) (728). 

Apart from some special cases, the ring-closure step in the course of the synthetic pathway is often condensation reaction and, thus, these transformations can be considered as cyclocondensations . Reactions following a few other mechanisms like cycloaddition, electrocyclization, and intramolecular nucleophilic addition of electron pair of an atom to a multiple bond also occur relatively often. Because of the fairly large complexity of the ring systems belonging to this chapter, the treatment according to the heteroatomic combinations seemed the most straightforward. Thus, the fused... 

Roth also studied the one-electron oxidation product [157b] of 9-methylenebicyclo[4.2.1]nonatriene [157a], It was assumed that the initial oxidation was to [157c] followed by a rapid intramolecular cycloaddition to [157b], The barrier to this addition was estimated at about 5 kcal mol-1. 

Intramolecular 1,3-dipolar cycloadditions have proven to be especially use fid in synthesis. The addition of nitrones to alkenes serves both to form a carbon-carbon bond and to introduce oxygen and nitrogen functionality.86 Entry 7 in Scheme 6.5 is an example. The nitrone B is generated by condensation of the aldehyde group with 7V-methylhydrox-ylamine and then goes on to product by intramolecular cycloaddition. 

The addition to alkenes normally leads to unstable adducts that lose carbon dioxide under the reaction conditions. The intramolecular cycloaddition of the sydnone (30) takes place at room temperature, however (Equation (5)) and the cycloadduct (31) has been characterized <86HCA927>. The unstable species formed by the loss of carbon dioxide are also azomethine ylides. It is therefore possible for a second 1,3-dipolar addition to take place, as illustrated in Scheme 6 for the reaction of 3-phenylsydnone with Al-phenylmaleimide <86TL317,92JA8414>. This 2 1 addition has been used as the basis of a synthesis of polyimides. Imides of the type (32) were used as the dipolarophiles and their reaction with 3-phenylsydnone gave linear polymers <87MM726>. 

CEJ1358> and the ruthenium mediated isomerization of double bonds (cf. Scheme 89, Section 8.11.7) <2007TL137> are recent examples of transition metal catalyzed manipulations at the side chain carbon atoms of 1,3-heterocycles. A novel side-chain addition reaction of aldehydes to 6-alkylidene-l,3-dioxin-4-ones was used for the construction of intermediates of lophotoxin <2006CJC1226>. An acid-catalyzed intramolecular cycloaddition of a hydroxy group to an alkene has been effected by the presence of an adjacent 1,3-dithiane moiety <2006TL4549>. 

Note that intramolecular cycloadditions were also plausible with the correct substitution and tether length. Bien and co-workers (71,72) found that addition of rhodium acetate to a-diazoketone 170 produced three products with the major outcome being the oxatricyclic 171 and a minor amount of the diastereomeric intramolecular cyclopropanes 172 (Scheme 4.39). 

---