Nitric acid elemental

Strong oxidising acids, for example hot concentrated sulphuric acid and nitric acid, attack finely divided boron to give boric acid H3CO3. The metallic elements behave much as expected, the metal being oxidised whilst the acid is reduced. Bulk aluminium, however, is rendered passive by both dilute and concentrated nitric acid and no action occurs the passivity is due to the formation of an impervious oxide layer. Finely divided aluminium does dissolve slowly when heated in concentrated nitric acid. 

Concentrated sulphuric acid and nitric acid—powerful oxidising agents—attack all the elements except nitrogen, particularly when the acids are warm. The products obtained reflect changes in stability of the oxidation states V and III of the Group V elements. 

Arsenic dissolves in concentrated nitric acid forming arsenicfV) acid, H3ASO4, but in dilute nitric acid and concentrated sulphuric acid the main product is the arsenic(III) acid, HjAsOj. The more metallic element, antimony, dissolves to form the (III) oxide Sb O, with moderately concentrated nitric acid, but the (V) oxide Sb205 (structure unknown) with the more concentrated acid. Bismuth, however, forms the salt bismulh(lll) nitrate Bi(N03)3. 5H,0. 

Antimony forms both a + 3 and a + 5 oxide. The + 3 oxide can be prepared by the direct combination of the elements or by the action of moderately concentrated nitric acid on antimony. It is an amphoteric oxide dissolving in alkalis to give antimonates(III) (for example sodium antimonite , NaSb02), and in some acids to form salts, for example with concentrated hydrochloric acid the trichloride, SbCl3, is formed. 

These elements are generally unaffected by non-oxidising acids (behaviour expected for non-metallic elements) but they do react when heated with concentrated sulphuric and nitric acids, both powerful oxidising agents. Sulphur is oxidised to sulphur dioxide by hot concentrated sulphuric acid,... 

With concentrated nitric acid, selenium and tellurium form only their +4 oxoacids, H2Se03 and H2Te03 respectively, indicating a tendency for the higher oxidation states to become less stable as the atomic number of the element is increased (cf. Group V, Chapter 9). 

Sulphur, as sulphide ion, is detected by precipitation as black lead sulphide with lead acetate solution and acetic acid or with sodium plumbite solution (an alkaLine solution of lead acetate). Halogens are detected as the characteristic silver halides by the addition of silver nitrate solution and dilute nitric acid the interfering influence of sulphide and cyanide ions in the latter tests are discussed under the individual elements. 

Technetium is a silvery-gray metal that tarnishes slowly in moist air. The common oxidation states of technetium are +7, +5, and +4. Under oxidizing conditions technetium (Vll) will exist as the pertechnetate ion, TcOr-. The chemistry of technetium is said to be similar to that of rhenium. Technetium dissolves in nitric acid, aqua regia, and cone, sulfuric acid, but is not soluble in hydrochloric acid of any strength. The element is a remarkable corrosion inhibitor for steel. The metal is an excellent superconductor at IIK and below. 

Mona.Zlte, The commercial digestion process for m on a site uses caustic soda. The phosphate content of the ore is recovered as marketable trisodium phosphate and the rare earths as RE hydroxide (10). The usual industrial practice is to attack finely ground m on a site using a 50% sodium hydroxide solution at 150°C or a 70% sodium hydroxide solution at 180°C. The resultant mixed rare-earth and thorium hydroxide cake is dissolved in hydrochloric or nitric acid, then processed to remove thorium and other nonrare-earth elements, and processed to recover the individual rare earths (see... 

AH operating facilities shear the spent fuel elements into segments several centimeters long to expose the oxide pellets to nitric acid for dissolution. This operation is often referred to as chop-leach. The design and operation of the shear is of primary importance because (/) the shear can be the production botdeneck, and (2) the shear is the point at which tritium and fission gases are released. 

In the tributyl phosphate extraction process developed at the Ames Laboratory, Iowa State University (46—48), a solution of tributyl phosphate (TBP) in heptane is used to extract zirconium preferentially from an acid solution (mixed hydrochloric—nitric or nitric acid) of zirconium and hafnium (45). Most other impurity elements remain with the hafnium in the aqueous acid layer. Zirconium recovered from the organic phase can be precipitated by neutralization without need for further purification. 

Instead of using sulfuric or phosphoric acid, nitric acid can be used to treat the phosphate lock to produce calcium nitrate fertilizer. Instead of neutralizing phosphoric acid with calcium which is useless, ammonia can be used to give ammonium phosphate, hence, two fertilizing elements. 

The elements of Group 5 are in many ways similar to their predecessors in Group 4. They react with most non-metals, giving products which are frequently interstitial and nonstoichiometric, but they require high temperatures to do so. Their general resistance to corrosion is largely due to the formation of surface films of oxides which are particularly effective in the case of tantalum. Unless heated, tantalum is appreciably attacked only by oleum, hydrofluoric acid or, more particularly, a hydrofluoric/nitric acid mixture. Fused alkalis will also attack it. In addition to these reagents, vanadium and niobium are attacked by other hot concentrated mineral acids but are resistant to fused alkali. 

Temperature (°C) Stabilising element Nitric acid concentration (%)... 

In the field of nuclear energy, titanium has been used for processing of fuel elements, where this demands use of nitric acid or aqua regia ", and for control-rod mechanism, in which the short half-life of irradiated titanium is of advantage. 

---