Nickel cyclotrimerization

Butynediol is more difficult to polymerize than propargyl alcohol, but it cyclotrimerizes to hexamethylolbenzene [2715-91 -5] (benzenehexamethanol) with a nickel carbonyl—phosphine catalyst (64) with a rhodium chloride—arsine catalyst a yield of 70% is claimed (65). 

A few further general examples of zinc catalytic activity or reactivity include the following. Other zinc-containing systems include a zinc phenoxide/nickel(0) catalytic system that can be used to carry out the chemo- and regioselective cyclotrimerization of monoynes.934 Zinc homoenolates have been used as novel nucleophiles in acylation and addition reactions and shown to have general utility.935,936 Iron/zinc species have been used in the oxidation of hydrocarbons, and the selectivity and conditions examined.362 There are implications for the mechanism of metal-catalyzed iodosylbenzene reactions with olefins from the observation that zinc triflate and a dizinc complex catalyze these reactions.937... 

Unlike nickel catalysts, palladium catalysts undergo neither cyclodimerization nor cyclotrimerization to form COD or CDT. Only one paper by Chepaikin and Khidekel reported that a mixture of divinylcyclobu-tanes was obtained from butadiene using palladium salts with noncom-plexing anions such as perchlorate and boron tetrafluoride (15). This is a big difference between the catalyses of palladium and nickel. 

It appears that neither the lithium carbenoid pathway nor the cyclopropanation of buta-trienes are general routes to [3]radialenes. More successful is the cyclotrimerization of 1,1-dihaloalkenes via copper or nickel carbenoids, provided the substituents at the other end of the C=C double bond are not too small. Thus, tris(fluoren-9-ylidene)cyclopropane 27 was formed besides butatriene 28 from the (l-bromo-l-alkenyl)cuprate 26 generated in situ from (9-dibromomethylene)fluorene (Scheme 3)10. The cuprate complexes formed... 

Novel transition metal-mediated strategies were also well represented this past year. Takahashi and co-workers reported a s nickel-catalyzed reaction between azaziconacyclopentadienes (9) and alkynes to form pyridines (10) of varying substitution patterns <00JA4994>. This methodology, a formal cyclotrimerization, is also noteworthy since two different alkynes can be used. In similar fashion, Eaton reported an aqueous, cobalt(II) catalyzed cyclotrimerization between two identical acetylenes and one nitrile to afford substituted pyridines . 

The patent literature contains several references to the use of sulfoxide complexes, usually generated in situ, as catalyst precursors in oligomerization and polymerization reactions. Thus, a system based upon bis(acrylonitrile)nickel(0> with added Me2SO or EtgSO is an effective cyclotrimerization catalyst for the conversion of butadiene to cyclo-1,5,-9-dodecatriene (44). A similar system based on titanium has also been reported (407). Nickel(II) sulfoxide complexes, again generated in situ, have been patented as catalyst precursors for the dimerization of pro-pene (151) and the higher olefins (152) in the presence of added alkyl aluminum compounds. 

The increased cooling efficiency of thin-walled reactors also has permitted the use of more volatile substrates in near molar quantities. (l-3 6-7 10-12-rj 2,6,10-Dodecatriene-l,12-diyl)nickel has been prepared in multiple gram quantities by cocondensation of nickel vapor and 1,3-butadiene. This method has provided a clean one-step route to this complex, which was first isolated and identified by Wilke et al.1 as an intermediate in the cyclotrimerization of 1,3-butadiene by nickel catalysts. 

Homogeneous nickel complexes proved to be versatile catalysts in dimerization and trimerization of dienes to yield different oligomeric products.46-55 Depending on the actual catalyst structure, nickel catalyzes the dimerization of 1,3-butadiene to yield isomeric octatrienes, and the cyclodimerization and cyclotrimerization to give 1,5-cyclooctadiene and all-trans-l,5,9-cyclododecatriene, respectively46 56 [Eq. (13.13)]. Ziegler-type complexes may be used to form cis,trans,trans-1,5,9-cyclododecatriene37,57 58 [Eq. (13.14)], which is an industrial intermediate ... 

These cyclodimerization and cyclotrimerization reactions are catalyzed by low valent Ziegler-type Ni catalysts (139—144). Large ligands, such as tris-o-biphenylyl phosphite on nickel tend to favor cydooctadiene (COD) formation while smaller ligands favor the linear dimer, 1,3,7-octatriene. The dimer yield at 80°C and 101.3 kPa (1 atm) is 96%. The nickel catalyst can also be placed on a support so that it can be recycled (145). Many other type catalysts have been reported for this reaction (146). The linear 1,3,7-octatriene and its 1,3,6 isomer are also obtained by a Pd catalyzed dimerization (147—151). The kinetics of thermally induced dimerization to COD has also been studied (152). 

The cyclotrimerization reaction described above can be converted into a cyclodimerization reaction by blocking one of the vacant coordination positions around the nickel atom (77, 66, 83). Phosphines and phosphites in a ligand-to-nickel ratio of 1 1 have been found to be particularly effective. 

The formation of CDT is suppressed if ethylene as well as butadiene is brought into contact with a naked-nickel catalyst. Depending on the reaction conditions, the product is a mixture of m,tram-1,5-cyclodecadiene (CDD) and 1,tram-4,9-decatriene (DT) (90). With equal concentration of butadiene and ethylene the co-oligomerization occurs some six times faster than the cyclotrimerization of butadiene to CDT. 

Reinhard, S., Soba, P., Rominger, F., and Bluemel, J. (2003) New silica-immobilized nickel catalysts for cyclotrimerizations of acetylenes. Advanced Synthesis and Catalysis, 345, 589-602. 

Related co-cyclotrimerizations of two alkyne molecules with limited isocyanates have also been achieved using cobalt and nickel catalysts. With respect to intramolecular versions, two examples of the cobalt(I)-catalyzed cycloaddition of a,m-diynes with isocyanates have been reported to afford bicyclic pyri-dones only in low yields, although 2,3-dihydro-5(lff)-indolizinones were successfully obtained from isocyanatoalkynes and several silylalkynes with the same cobalt catalysis [19]. On the other hand, the ruthenium catalysis using Cp RuCl(cod) as a precatalyst effectively catalyzed the cycloaddition of 1,6-diynes 21 with 4 equiv. of isocyanates in refluxing 1,2-dichloroethane to afford bicyclic pyridones 25 in 58-93% yield (Eq. 12) [20]. In this case,both aryl and aliphatic isocyanates can be widely employed. 

The NiY zeolite was also shown to be active for the cyclotrimerization of propyne with 1,2,4-trimethylbenzene being the main product. The activities of the above-mentioned transition metal ions for acetylene trimerization are not so surprising since simple salts and complexes of these metals have been known for some time to catalyze this reaction (161, 162). However, the tetramer, cyclooctatetraene, is the principal product in homogeneous catalysis, particularly when simple salts such as nickel formate and acetate are used as catalysts (161). The predominance of the trimer product, benzene, for the zeolite Y catalysts might be indicative of a stereoselective effect on product distribution, possibly due to the spatial restrictions imposed on the reaction transition-state complex inside the zeolite cages. 

Alkynes can be selectively dimerized, cyclotrimerized, or polymerized with a large variety of transition metal and lanthanide catalysts nickel also catalyzes the cyclote-tramerization of HC=CH to cyclooctatetraene. Very electrophilic complexes such as Cp 2LnR and Group 4 compounds,137 as well as 18-electron species such as Cp RuH3(L) and Ru(Tp)Cl(PPh3)2, catalyze the linear dimerization of terminal alkynes 138... 

Additions of methylenecyclopropanes to alkynes (59 equation 24) give 4-methylene-1-cyclopentenes (60), (61) and (62) in the presence of phosphite-coordinated nickel(O) catalysts (Table S). Aftynylsilanes are particularly suitable for these codimerizations. In the reactions with 1-alkynes or dialkylalkynes, oligomerization of the alkynes cannot be avoided. When alkynes with electron-attracting substituents are used, cyclotrimerization is so rapid that cross addition no longer occurs. ... 

An examination of the photodecoloration of bis-[4-(dimethylamino)dithio-benzyl]nickel has shown it to proceed in two stages, the first of which increases with increasing concentration of dissolved oxygen.Rate enhancements of thirty- to forty-fold are reported for the cyclotrimerization of acetylene under u.v. irradiation in the presence of a Ni"-Si02 catalyst pretreated with... 

An intramolecular cyclotrimerization has been reported by condensation of a diyne with an alkyne in the presence of a palladium, molybdenum, nickel, rhodium, iridium, or ruthenium catalyst. Triynes have been... 

This article describes further progress in the chemistry of 7r-allylnickel compounds. First, preparative methods for 7r-allylnickel halides, alkoxides, amides, and alkyls are described. Next, some chemical properties of these compounds—e.g., a recently observed disproportionation reaction—are discussed. Then, the use of 7r-allylnickel halides as homogeneous catalysts is discussed. Whereas bis (7r-allyl) nickel is a catalyst for butadiene cyclotrimerization, 7r-allylnickel halides combined with Lewis acids, such... 

In the case of tetramethylbutatriene, Ni(0) catalyzes not only the cyclodimerization (formation of [4]radialene 94), but also the cyclotrimerization, leading to [6]radialene 95 and its isomer 96 (see also Section ILD). The product pattern depends to some extent on the nature of the catalyst, but the choice of solvent seems to be more crucial. This is illustrated impressively by the Ni(cod)2-catalyzed reaction of 93, which leads exclusively to the [4]radialene in toluene solution, but to the [6]radialene in DMF. Interestingly, the stoichiometric reaction between 93 and (2,2Tbipyridyl)-(l,5-cyclooctadiene)nickel yields the nickel complex 97, which has been isolated and characterized by X-ray diffraction. On treatment of 97 with two equivalents of maleic anhydride, reductive elimination of nickel takes place and octamethyl[4]radialene (94) is formed in good yield. This reaction sequence sheds light on the mechanism of the Ni-catalyzed reactions mentioned above further ideas on the mechanism of the cyclodimerization and cyclotrimerization reactions have been developed by lyoda and coworkers. ... 

Alkyne cyclotrimerization occurs at various homogeneous and heterogeneous transition metal and Ziegler-type catalysts [7], Substituted benzenes have been prepared in the presence of iron, cobalt, and nickel carbonyls [8] as well as trialkyl- and triarylchromium compounds [9]. Bis(acrylonitrile)nickel [10] and bis(benzonitrile)palladium chloride [11] catalyze the cyclotrimerization of tolane to hexaphenylbenzene. NiCl2 reduced by NaBH4 has been utilized for the trimer-ization of 3-hexyne to hexaethylbenzene [12]. Ta2Cl6(tetrahydrothiophene)3 and Nb2Cl6(tetrahydrothiophene)3 as well as 7 -Ind-, and 77 -Ru-rhodium... 

Instead of a second or third alkyne, an alkene C=C double bond may be incorporated into the cyclotrimerization reaction. Iron [65], rhodium [66], nickel [67], palladium [68], or cobalt [69] catalysts have been used to form cyclohexa-dienes. However, the preparative use of this catalytic co-cyclization is disturbed by consecutive side reactions of the resulting dienes such as cycloaddition or dehydrogenation. Itoh, Ibers and co-workers [70] have reported the straight palladium-catalyzed co-cyclization reaction of C2(C02Me)2 and norbomene (eq. (24)). 

Compared with the Diels-Alder reaction, the [2+2+2]-cycloaddition is potentially more powerful since the number of new bonds as well as chirality centers that are formed is higher. Unfortunately, the reaction seems to be entropically or kinetically unfavorable. This disadvantage can, however, be overcome by the use of transition metal catalysts (templates). Among the most successful examples of this reaction type, the nickel(II) catalyzed Reppe reactions 96), the cobalt(I) catalyzed cocyclizations of a,to-diynes with alkynes 97), the cobalt(I) catalyzed pyridine synthesis 985 and last but not least the palladium(0) catalyzed cyclotrimerizations of 3,3-dialkylcyclopropenes to frans-cr-tris-homobenzenes must be mentioned. The latter has been known for ten years 99>. 

---