Neutron advantages

The Pu-Fe and Pu-Ni composites are expected to be like the Pu-Al composites, but more robust and capable of withstanding higher temperatures. Both iron and nickel form intermetallic compounds with plutonium, which should allow for the production of a composite structure as in the Pu-Al fuel forms. Some neutronic advantages might be gained with the use of either nickel or iron from their resonance ab.sorption properties. 

One of the important advantages of NAA is its applicability to almost all elements in the periodic table. Another advantage of neutron activation is that it is nondestructive. Consequently, NAA is an important technique for analyzing archaeological and forensic samples, as well as works of art. 

Radiochemical methods of analysis take advantage of the decay of radioactive isotopes. A direct measurement of the rate at which a radioactive isotope decays may be used to determine its concentration in a sample. For analytes that are not naturally radioactive, neutron activation often can be used to induce radioactivity. Isotope dilution, in which a radioactively labeled form of an analyte is spiked into the sample, can be used as an internal standard for quantitative work. 

A variety of experimental techniques have been employed to research the material of this chapter, many of which we shall not even mention. For example, pressure as well as temperature has been used as an experimental variable to study volume effects. Dielectric constants, indices of refraction, and nuclear magnetic resonsance (NMR) spectra are used, as well as mechanical relaxations, to monitor the onset of the glassy state. X-ray, electron, and neutron diffraction are used to elucidate structure along with electron microscopy. It would take us too far afield to trace all these different techniques and the results obtained from each, so we restrict ourselves to discussing only a few types of experimental data. Our failure to mention all sources of data does not imply that these other techniques have not been employed to good advantage in the study of the topics contained herein. 

Fig. 5. Radioactivity after shutdown per watt of thermal power for A, a Hquid-metal fast breeder reactor, and for a D—T fusion reactor made of various stmctural materials B, HT-9 ferritic steel C, V-15Cr-5Ti vanadium—chromium—titanium alloy and D, siUcon carbide, SiC, showing the million-fold advantage of SiC over steel a day after shutdown. The radioactivity level after shutdown is also given for E, a SiC fusion reactor using the neutron reduced...

Full advantage of the neutron production by plutonium requires a fast reactor, in which neutrons remain at high energy. Cooling is provided by a hquid metal such as molten sodium or NaK, an alloy of sodium and potassium. The need for pressurization is avoided, but special care is required to prevent leaks that might result in a fire. A commonly used terminology is Hquid-metal fast-breeder reactor (LMFBR). 

This reaction offers the advantage of a superior neutron yield of in a thermal reactor system. The abiHty to breed fissile from naturally occurring Th allows the world s thorium reserves to be added to its uranium reserves as a potential source of fission power. However, the Th/ U cycle is unlikely to be developed in the 1990s owing both to the more advanced state of the / Pu cycle and to the avadabiHty of uranium. Thorium is also used in the production of the cx-emitting radiotherapeutic agent, Bi, via the production of Th and subsequent decay through Ac (20). 

The only large-scale use of deuterium in industry is as a moderator, in the form of D2O, for nuclear reactors. Because of its favorable slowing-down properties and its small capture cross section for neutrons, deuterium moderation permits the use of uranium containing the natural abundance of uranium-235, thus avoiding an isotope enrichment step in the preparation of reactor fuel. Heavy water-moderated thermal neutron reactors fueled with uranium-233 and surrounded with a natural thorium blanket offer the prospect of successful fuel breeding, ie, production of greater amounts of (by neutron capture in thorium) than are consumed by nuclear fission in the operation of the reactor. The advantages of heavy water-moderated reactors are difficult to assess. 

Instiximental neutron activation analysis (INAA) is considered the most informative and highly sensitive. Being applied, it allows detecting and determination of 30-40 elements with the sensitivity of 10 -10 g/g in one sample. The evident advantage of INAA is the ability to analyze samples of different nature (filters, soils, plants, biological tests, etc.) without any complex schemes of preliminai y prepai ation. 

Atomic absorption spectroscopy of VPD solutions (VPD-AAS) and instrumental neutron activation analysis (INAA) offer similar detection limits for metallic impurities with silicon substrates. The main advantage of TXRF, compared to VPD-AAS, is its multielement capability AAS is a sequential technique that requires a specific lamp to detect each element. Furthermore, the problem of blank values is of little importance with TXRF because no handling of the analytical solution is involved. On the other hand, adequately sensitive detection of sodium is possible only by using VPD-AAS. INAA is basically a bulk analysis technique, while TXRF is sensitive only to the surface. In addition, TXRF is fast, with an typical analysis time of 1000 s turn-around times for INAA are on the order of weeks. Gallium arsenide surfaces can be analyzed neither by AAS nor by INAA. 

An additional advantage to neutron reflectivity is that high-vacuum conditions are not required. Thus, while studies on solid films can easily be pursued by several techniques, studies involving solvents or other volatile fluids are amenable only to reflectivity techniques. Neutrons penetrate deeply into a medium without substantial losses due to absorption. For example, a hydrocarbon film with a density of Ig cm havii a thickness of 2 mm attenuates the neutron beam by only 50%. Consequently, films several pm in thickness can be studied by neutron reflecdvity. Thus, one has the ability to probe concentration gradients at interfaces that are buried deep within a specimen while maintaining the high spatial resolution. Materials like quartz, sapphire, or aluminum are transparent to neutrons. Thus, concentration profiles at solid interfaces can be studied with neutrons, which simply is not possible with other techniques. 

One of the key advantages to time-of-flight reflectometers comes in the measurement of fluid surfaces. Simply delivering the neutrons onto the fluid surface at a fixed angle (without moving the specimen) and detecting the reflected neutrons yields the reflectivity profile. 

Other fusion reactions such as D plus "He" and D plus D (not to mention the II plus II of stars) require far more difficult physical conditions than D plus T, but offer potential advantages in reduced neutron production, and even larger reseiwes of potential energy in the case of D-D. 

In the light water reactor, the circulating water serves another purpose in addition to heat transfer. It acts to slow down, or moderate, the neutrons given off by fission. This is necessary if the chain reaction is to continue fast neutrons are not readily absorbed by U-235. Reactors in Canada use heavy water, D20, which has an important advantage over H20. Its moderating properties are such that naturally occurring uranium can be used as a fuel enrichment in U-235 is not necessary. 

---