Natural ethane

Resin, Polyester (General) a de i no 631-2499 Rubber, Natural Ethane m 631-1133... 

Sales gas, which is typically made up of methane (CH ) and small amounts of ethane (C2Hg), can be exported by refrigerated tanker rather than by pipeline and has to be compressed by a factor of 600 (and cooled to -150°C). This is then termed Liquefied Natural Gas (LNG). 

When gases are rich in ethane, propane, butane and heavier hydrocarbons and there is a local market for such products it may be economic to recover these condensable components. Natural gas liquids can be recovered in a number of ways, some of which have already been described in the previous section. However to maximise recovery of the individual NGL components, gas would have to be processed in a fractionation plant. 

The orbitals from which electrons are removed and those into which electrons are excited can be restricted to focus attention on correlations among certain orbitals. For example, if excitations out of core electrons are excluded, one computes a total energy that contains no correlation corrections for these core orbitals. Often it is possible to so limit the nature of the orbital excitations to focus on the energetic quantities of interest (e.g., the CC bond breaking in ethane requires correlation of the acc orbital but the 1 s Carbon core orbitals and the CH bond orbitals may be treated in a non-correlated manner). 

Natural gas, depending on its source, contains—besides methane as the main hydrocarbon compound (present usually at >80-90%) — some of the higher homologous alkanes (ethane, propane, butane). In wet gases the amount of C2-C5 alkanes is higher (gas liquids). 

Q-C, Natural gas, methane, ethane, propane, butane, liquefied petroleum gas... 

Natural gas is an abundant source of methane ethane and propane Petro leum IS a liquid mixture of many hydrocarbons including alkanes A1 kanes also occur naturally m the waxy coating of leaves and fruits... 

Ethylene is the cornerstone of the world s mam moth petrochemical industry and is produced in vast quantities In a typical year the amount of ethylene produced in the United States (5 x 10 ° lb) exceeds the combined weight of all of its people In one process ethane from natural gas is heated to bring about its dissociation into ethylene and hydrogen... 

Olefins are produced primarily by thermal cracking of a hydrocarbon feedstock which takes place at low residence time in the presence of steam in the tubes of a furnace. In the United States, natural gas Hquids derived from natural gas processing, primarily ethane [74-84-0] and propane [74-98-6] have been the dominant feedstock for olefins plants, accounting for about 50 to 70% of ethylene production. Most of the remainder has been based on cracking naphtha or gas oil hydrocarbon streams which are derived from cmde oil. Naphtha is a hydrocarbon fraction boiling between 40 and 170°C, whereas the gas oil fraction bods between about 310 and 490°C. These feedstocks, which have been used primarily by producers with refinery affiliations, account for most of the remainder of olefins production. In addition a substantial amount of propylene and a small amount of ethylene ate recovered from waste gases produced in petroleum refineries. 

The market value of natural gas Hquids is highly volatile and historically has been weakly related to the world price of cmde oil. During the 1980s, the market value of natural gas Hquids ranged from approximately 60% of the price of cmde to 73% (12). In this 10-year interval, several fluctuations occurred in the natural gas Hquid market. Because of the variabiHty of the natural gas Hquid market, the NGL recovery plants need to have flexibiHty. Natural gas Hquid products compete in the following markets ethane propane a Hquefted petroleum gas (LPG) a C-3/C-4 mix and / -butane all compete as petrochemical feedstocks. Propane and LPG are also used as industrial and domestic fuels, whereas 2-butane and natural gasoline, consisting of C-5 and heavier hydrocarbons, are used as refinery feedstocks. 

Natural gas Hquids represent a significant source of feedstocks for the production of important chemical building blocks that form the basis for many commercial and iadustrial products. Ethyleae (qv) is produced by steam-crackiag the ethane and propane fractions obtained from natural gas, and the butane fraction can be catalyticaHy dehydrogenated to yield 1,3-butadiene, a compound used ia the preparatioa of many polymers (see Butadiene). The / -butane fractioa can also be used as a feedstock ia the manufacture of MTBE. 

The main commercial source of methane, ethane, and propane is natural gas, which is found ia many areas of the world ia porous reservoirs they are associated either with cmde oil (associated gas) or ia gas reservoirs ia which no oil is present (nonassociated gas). These gases are basic raw materials for the organic chemical industry as well as sources of energy. The composition of natural gas varies widely but the principal hydrocarbon usually is methane (see Gas, natural). Compositions of typical natural gases are Hsted ia Table 2. 

Condensable hydrocarbons are removed from natural gas by cooling the gas to a low temperature and then by washing it with a cold hydrocarbon hquid to absorb the condensables. The uncondensed gas (mainly methane with a small amount of ethane) is classified as natural gas. The condensable hydrocarbons (ethane and heavier hydrocarbons) are stripped from the solvent and are separated into two streams. The heavier stream, which largely contains propane with some ethane and butane, can be Hquefied and is marketed as Hquefied petroleum gas (LPG) (qv). The heavier fractions, which consist of and heavier hydrocarbons, are added to gasoline to control volatihty (see Gasoline and other motor fuels). 

As indicated in Table 4, large-scale recovery of natural gas Hquid (NGL) occurs in relatively few countries. This recovery is almost always associated with the production of ethylene (qv) by thermal cracking. Some propane also is used for cracking, but most of it is used as LPG, which usually contains butanes as well. Propane and ethane also are produced in significant amounts as by-products, along with methane, in various refinery processes, eg, catalytic cracking, cmde distillation, etc (see Petroleum). They either are burned as refinery fuel or are processed to produce LPG and/or cracking feedstock for ethylene production. 

The most important commercial use of ethane and propane is in the production of ethylene (qv) by way of high temperature (ca 1000 K) thermal cracking. In the United States, ca 60% of the ethylene is produced by thermal cracking of ethane or ethane/propane mixtures. Large ethylene plants have been built in Saudi Arabia, Iran, and England based on ethane recovery from natural gas in these locations. Ethane cracking units have been installed in AustraHa, Qatar, Romania, and Erance, among others. 

Irradiation of ethyleneimine (341,342) with light of short wavelength ia the gas phase has been carried out direcdy and with sensitization (343—349). Photolysis products found were hydrogen, nitrogen, ethylene, ammonium, saturated hydrocarbons (methane, ethane, propane, / -butane), and the dimer of the ethyleneimino radical. The nature and the amount of the reaction products is highly dependent on the conditions used. For example, the photoproducts identified ia a fast flow photoreactor iacluded hydrocyanic acid and acetonitrile (345), ia addition to those found ia a steady state system. The reaction of hydrogen radicals with ethyleneimine results ia the formation of hydrocyanic acid ia addition to methane (350). Important processes ia the photolysis of ethyleneimine are nitrene extmsion and homolysis of the N—H bond, as suggested and simulated by ab initio SCF calculations (351). The occurrence of ethyleneimine as an iatermediate ia the photolytic formation of hydrocyanic acid from acetylene and ammonia ia the atmosphere of the planet Jupiter has been postulated (352), but is disputed (353). 

Other natural gas Hquids include natural gasoline [8006-61 -9] which is composed of the pentanes and heavier components of the natural gas stream, and ethane [74-84-0]. Most recendy ethane has become the principal product of natural gas processing plants. 

LPG is recovered from natural gas principally by one of four extraction methods turboexpander, absorption (qv), compression, and adsorption (qv). Selection of the process is dependent on the gas composition and the degree of recovery of ethane and LPG, particularly from large volumes of lean natural gas. 

Essentially all of the methane [74-82-8] is removed ia the demethanizer overhead gas product. High recovery of ethane and heavier components as demethanizer bottoms products is commonplace. The work that is generated by expanding the gas ia the turboexpander is utilized to compress the residue gas from the demethanizer after it is warmed by heat exchange with the inlet gas. Recompression and deUvery to a natural gas pipeline is performed downstream of the plant. A propane recovery of 99% can be expected when ethane recoveries are ia excess of 65%. 

Adsorption. Adsorption processes have been used to recover hydrocarbons that are heavier than ethane from natural gas. Although the adsorption process has appHcations for the recovery of pentane and heavier hydrocarbons from lean gas, the percentage recovery of LPG components in these plants usually is low compared to the normal recovery of LPG in modem turboexpander or oil-absorption plants. 

Aliphatics. Methane, obtained from cmde oil or natural gas, or as a product from various conversion (cracking) processes, is an important source of raw materials for aliphatic petrochemicals (Fig. 10) (see Hydrocarbons). Ethane, also available from natural gas and cracking processes, is an important source of ethylene, which, in turn, provides more valuable routes to petrochemical products (Fig. 11). 

Includes natural gas, butane, ethane, propane, waste heat, and waste gases. 

---