Naming partial

For rings without nitrogen, the endings -ole and -olane are used to name partially- and fully-saturated five-membered rings. Representative examples are given in Figure 6. 

On the Conceptual Layer, the CAPE domain is represented by four major partial models The central chemicaLprocesssystem represents all those concepts that are directly related to materials processing and plant operating - just like the identically named partial model in CLiP. The partial model material provides an abstract description of materials involved in a chemical process, whereas model defines notions required for a description of models and model building. Finally, the partial model supporting-concepts supplies... 

To facilitate the discussion below, we need, once again, to define the terminology first. By our definition, the isotherm-based reactive transport models are not coupled models because only one set of equations, namely partial differential equations for transport, is solved. The chemical processes are simulated according to empirical parameters rather than according to thermodynamics and chemical kinetics. 

Component Name Partial Pressure, torr Trial 1 Surface Coverages Trial 2 Surface Coverages Tnal3 Surface Coverages... 

Absorption of IFN-a from intramuscular [137,138], subcutaneous [139,140], intra-peritoneal [141], intradermal [142], duodenal, and rectal [143] sites has been reported. In general, IFN-a absorption from these sites is prolonged, and maximum serum concentrations occur 1-6h post injection, followed by measurable concentrations through 8-24h post injection. The concentration-time profile appears to be independent of the purity or source of IFN-a, namely, partially purified, natural, or recombinant. In addition, the disposition profiles were similar across the tested species, including mice, rabbits, dogs, and monkeys. Several of these studies have determined the absolute bioavailability from the intramuscular site to be 42% in dogs [139] and 93% [144] and 56% [136] in monkeys. 

At the time of the conclusion of this study the elucidation of the structure of a nonapeptide was regarded as a major achievement. It could be realized only because of the advances made in the methodology of peptide research during the preceding years, for instance purification by Craig distribution or sequential degradation by the Edman method. The approach that yielded the even more complex structure of insuhn [13], namely partial acid hydrolysis followed by... 

Common name partially hydrolyzed vinyl acetate-ammonium acrylate copolymer... 

The sum of all molecular collision forces related to the unit area is called total pressure, the proportional pressure of a gas species is named partial pressure . The sum of the partial pressures of all gas species present in the closed volume yields the total pressure (Dalton s law). 

We assumed that the reaction process of gasification has been divided for convenience into two categories, namely partial oxidation and secondary reaction. Coal is converted into H2, CO, CO2, and H2O by the reaction with O2 and H2O. Most solid-gas reactions except for hydrogenation described later are classified in it. In secondary reaction step, the gas produced by partial oxidation changes its composition by shift reaction and formation of organic compounds. We transform standard reaction formula (24) mathematically according to both steps mentioned above and derived a formula having the same form of formula (1). 

At lower temperatures, cold-end coatings (CECs 150 °C) are further deposited. They are 50 nm of organic material, namely, partially oxidized polyethylene, which is spray-deposited from a dilute aqueous emulsion. The coating is applied when the glass temperature is about 150 °C, after the container is annealed. This temperature is critical since when it is too high an anhydrous film forms and delaminates. 

The aforementioned are brief examples of successful industrial applications of biocatalysts. In the following section, four detailed case studies of enzymatic processing of lipid-based bioproducts, namely partial acylglycerols, bioactive compounds, phospholipids and fatty acid alkyl esters are presented. 

---