MWCNT nanotube

CNTs are commonly classified into single-waUed (SWCNTs) and multi-walled (MWCNTs) nanotubes [28]. SWCNTs consist of a single graphene layer rolled up into a hollow cylinder and are either metallic or semiconducting, whereas MWCNTs are comprised of two, three, or more concentrically arranged cylinders and exhibit only metallic character. Double-wall carbon nanotubes (DWCNTs) are the most basic members of the MWCNT family. The special role of DWCNTs should be emphasized, as they are the link between SWCNTs and the more complex MWCNTs and, therefore, of great interest for a fundamental understanding of these novel nanostructures. 

Among the several known types of carbon fibres the discussion in this chapter is limited to the electric arc grown multi-walled carbon nanotubes (MWCNTs) as well as single-walled ones (SWCNTs). For MWCNT we restrict the discussion to the idealised coaxial cylinder model. For other models and other shapes we refer to the literature [1-6],... 

Studies on the electronic structure of carbon nanotube (CNT) is of much importance toward its efficient utilisation in electronic devices. It is well known that the early prediction of its peculiar electronic structure [1-3] right after the lijima s observation of multi-walled CNT (MWCNT) [4] seems to have actually triggered the subsequent and explosive series of experimental researches of CNT. In that prediction, alternative appearance of metallic and semiconductive nature in CNT depending on the combination of diameter and pitch or, more specifically, chiral vector of CNT expressed by two kinds of non-negative integers (a, b) as described later (see Fig. 1). 

The standard method to synthesize MWCNTs is based on the electric-arc experiment proposed by Ebbesen and Ajayan [8]. Basically, the production system is similar to the one used by Kratschmer et al. [11] to produce macroscopic quantities of C o and the main difference between the two experiments is the inert gas pressure, that must be rather low (20-100 mbar) for an efficient fullerene production [11], but must be increased to 350-700 mbar to generate nanotubes efficiently [8],... 

Electron irradiation (100 keV) of the sample, heated to 800°C, yields MWCNTs (20-100 nm in length) attached to the surface. Such nanotube growth does not take place if natural graphite, carbon nanoparticles or PTFE are subjected to electron irradiation. The result implies that the material may be a unique precursor for CNTs and may constitute a new preparation method. 

The formation of fullerenes and CNTs has also been affected by their environmental atmosphere [22] and, in particular, a hydrogen atmosphere plays an important role in forming graphitic structures of multi-walled CNTs (MWCNTs) in the form of buckybundles [24]. Intercalation into MWCNTs has been difficult or impossible, because there is no space for intercalants to enter into a Russian-doll-type structure of the nanotubes. However, the buckybundles formed in the hydrogen arc discharge were found to be successfully intercalated with potassium and ferric chloride (FeCl3) without breaking the... 

Pacurari, M. et al. (2008) Oxidative and molecular interactions of multi-wall carbon nanotubes (MWCNT) in normal and malignant human mesothelial cells. Nanotoxicology, 2 (3), 155-170. 

Multiwall carbon nanotubes (MWCNTs) have been synthesized by catalytic chemical vapor deposition (CCVD) of ethylene on several mesoporous aluminosilicates impregnated with iron. The aluminosilicates were synthesized by sol-gel method optimizing the Si/Al ratios from 6 to 80. The catalysts are characterized by nitrogen adsorption, X-ray diffraction, 27A1 NMR, thermogravimetric analysis (TGA) and infrared. The MWCNTs are characterized by TGA and transmission and scanning electron microscope. 

The aluminum is incorporated in a tetrahedral way into the mesoporous structure, given place to Bronsted acidic sites which are corroborated by FTIR using pyridine as probe molecule. The presence of aluminum reduces the quantity of amorphous carbon produced in the synthesis of carbon nanotubes which does not happen for mesoporous silica impregnated only with iron. It was observed a decrease in thermal stability of MWCNTs due to the presence of more metal particles which help to their earlier oxidation process. 

J.H.T. Luong, S. Hrapovic, and D. Wang, Multiwall carbon nanotube (MWCNT) based electrochemical biosensors for mediatorless detection of putresdne. Electroanalysis 17, 47—53 (2005). 

Multivariate curve resolution, 6 54—56 Multivariate linear regression, 6 32—35 Multivariate optical elements (MOE), 6 68 Multiwalled carbon nanotubes (MWCNTs), 77 48, 49 22 720 26 737. See also Carbon nanotubes (CNTs) Multiwall nanotubes (MWNTs) synthesis of, 26 806 Multiwall fullerenes, 12 231 Multiwall nanotubes (MWNTs), 12 232 Multiwall paper bags, 78 11 Multiway analysis, 6 57-63 Multiyear profitability analysis, 9 535-537 Multiyear venture analysis, 0 537-544 sample, 9 542-S44 Mummification, 5 749 Mumps vaccine, 25 490 491 Mumps virus, 3 137 Municipal biosolids, as biomass, 3 684 Municipal distribution, potential for saline water use in, 26 55-56 Municipal effluents, disposal of, 26 54 Municipal landfill leachate, chemicals found in, 25 876t... 

Fig. 9.20 Luminescent carbon nanotubes (a) Cy3 labeled antisense myc-modified SWCNTs (b) quantum dots-modifed MWCNTs (With permission from American Scientific publisher and...

SWCNT, single-walled carbon nanotube MWCNT, multiwalled carbon nanotube. 

CNTs may consist of just one layer (i.e. single-walled carbon nanotubes, SWCNTs), two layers (DWCNTs) or many layers (MWCNTs) and per definition exhibit diameters in the range of 0.7 < d < 2 nm, 1 < d < 3 nm, and 1. 4 < d < 150 nm, respectively. The length of CNTs depends on the synthesis technique used (Section 1.1.4) and can vary from a few microns to a current world record of a few cm [16]. This amounts to aspect ratios (i.e. length/diameter) of up to 107, which are considerably larger than those of high-performance polyethylene (PE, Dyneema). The aspect ratio is a crucial parameter, since it affects, for example, the electrical and mechanical properties of CNT-containing nanocomposites. 

In principle, metallic CNTs are ballistic conductors (i.e. electrons move without scattering), which means that the resistance is independent of the nanotube length. In MWCNTs, the conductance is defined by the outermost layer [53]. In general, the ballistic nature of CNTs is affected by the presence of structural defects [54]. Still, experimental values for electric current density are exceptionally high, i.e. up to 4 ... 

D. H. Zhang, M. A. Kandadai, J. Cech, S. Roth, S. A. Curran, Poly(L-lactide) (PLLA)/multiwalled carbon nanotube (MWCNT) composite Characterization and biocompatibility evaluation, Journal of Physical Chemistry B, vol. 110, pp. 12910-12915, 2006. 

---