Multiphoton application

This chapter summarizes our current knowledge and understanding of linear ji-conjugated systems for NIR dyes cyanines and cyanine-like molecules for one-and multiphoton applications, with a focus on the intramolecular spectroscopic properties and dynamics and the experimental methodologies used to characterize these particular organic systems and others. 

Jureller, J. E., Scherer, N. F., Birks, T. A., Wadsworth, W. J. and Russell, P. S. J. (2003). Widely tunable femtosecond pulses from a tapered fiber for ultrafast microscopy and multiphoton applications. In Ultrafast Phenomena xiii (Miller, R. J. D., ed.). Springer, Berlin, pp. 684-6. 

See also Luminescent dendrimers antibacterial, 26 799 biocompatibility studies of, 26 800-801 in catalysis, 26 805-806 in cell targeting, 26 797-798 as chelators, 26 806-807 core and interior shells of, 26 789 cytotoxicity of, 26 800-801 in drug delivery, 26 792-795 in gene transfection, 26 791-792 as imaging agents, 26 795-797 luminescent, 26 801-804 medical applications of, 26 791-801 micelle-mimetic behavior of, 26 789 multiphoton applications of, 26 803-804... 

One attractive possibility is to develop CPs that can be used for in vivo imaging of protein aggregates. In this regard, the synthesis of appropriately functionalized CPs that are able to cross the blood-brain barrier (BBB) has been exemplified [36]. Such dyes can be utilized in powerful multi-photon imaging applications as previously reported CPs have been shown to have an excellent cross-section area compared with small fluorescent dyes, making these molecules suitable for multiphoton applications [33, 37]. 

In contrast to the ionization of C q after vibrational excitation, typical multiphoton ionization proceeds via the excitation of higher electronic levels. In principle, multiphoton ionization can either be used to generate ions and to study their reactions, or as a sensitive detection technique for atoms, molecules, and radicals in reaction kinetics. The second application is more common. In most cases of excitation with visible or UV laser radiation, a few photons are enough to reach or exceed the ionization limit. A particularly important teclmique is resonantly enlianced multiphoton ionization (REMPI), which exploits the resonance of monocluomatic laser radiation with one or several intennediate levels (in one-photon or in multiphoton processes). The mechanisms are distinguished according to the number of photons leading to the resonant intennediate levels and to tire final level, as illustrated in figure B2.5.16. Several lasers of different frequencies may be combined. 

The phenomenon of multiphoton dissociation finds a possible application in the separation of isotopes. For this purpose it is not only the high power of the laser that is important but the fact that it is highly monochromatic. This latter property makes it possible, in favourable circumstances, for the laser radiation to be absorbed selectively by a single isotopic molecular species. This species is then selectively dissociated resulting in isotopic enrichment both in the dissociation products and in the undissociated material. 

The large variability in elemental ion yields which is typical of the single-laser LIMS technique, has motivated the development of alternative techniques, that are collectively labeled post-ablation ionization (PAI) techniques. These variants of LIMS are characterized by the use of a second laser to ionize the neutral species removed (ablated) from the sample surface by the primary (ablating) laser. One PAI technique uses a high-power, frequency-quadrupled Nd-YAG laser (A, = 266 nm) to produce elemental ions from the ablated neutrals, through nonresonant multiphoton ionization (NRMPI). Because of the high photon flux available, 100% ionization efflciency can be achieved for most elements, and this reduces the differences in elemental ion yields that are typical of single-laser LIMS. A typical analytical application is discussed below. 

Development of a Near-Infrared 35 fs Laser Microscope and its Application to Higher Order Multiphoton Excitation... 

From these vievqjoints, we have developed a femtosecond NIR laser microscope with a home-built cavity dumped chromium forsterite (Cr F) laser as an excitation light source whose output wavelength is centered at 1260 run. In the following the set-up of the NIR laser microscope and its application to multiphoton imaging are presented. 

The advancement of the application of lasers in combination with the molecular beam technique has made a great impact in the understanding of primary photodissociation processes. For state-specific detection of small fragments, laser-induced fluorescence, multiphoton ionization, and coherent laser scattering have provided extremely detailed information on the dynamics of photodissociation. Unfortunately, a large number of interesting... 

He GS, Tan LS, Zheng Q, Prasad PN (2008) Multiphoton absorbing materials molecular designs, characterizations, and applications. Chem Rev 108 1245-1330... 

A number of other laser spectroscopic techniques are of interest but space does not permit their discussion. A few specialized methods of detecting laser absorption worthy of mention include multiphoton ionization/mass spectrometry (28), which is extremely sensitive as well as mass selective for gas-phase systems optically detected magnetic resonance (29) laser intracavity absorption, which can be extremely sensitive and is applicable to gases or solutions (30) thermal blooming, which is also applicable to very weak absorbances in gases or liquids (31) and... 

The paper is organized as follows we first discuss vibrational excitation through various mechanisms, including ionization, / -dependent depletion, and bond-softening. We then present evidence for electronic excitation and consider multiphoton excitation, inner orbital ionization, and excitation through recollisions. Several applications of these interactions are presented, followed by our conclusions. 

Mach-Zehnder interferometer, 144 Medical applications, 153 Metal-insulator transitions, 52 Monte Carlo procedure, 135 Multi-energy X-ray imaging, 131 Multilayer targets, 131 Multiphoton absorption, 85 Multiphoton ionization, 82 Multiple filamentation, 91, 92 Multipulse techniques, 152... 

By employing a laser for the photoionization (not to be confused with laser desorption/ ionization, where a laser is irradiating a surface, see Section 2.1.21) both sensitivity and selectivity are considerably enhanced. In 1970 the first mass spectrometric analysis of laser photoionized molecular species, namely H2, was performed [54]. Two years later selective two-step photoionization was used to ionize mbidium [55]. Multiphoton ionization mass spectrometry (MPI-MS) was demonstrated in the late 1970s [56—58]. The combination of tunable lasers and MS into a multidimensional analysis tool proved to be a very useful way to investigate excitation and dissociation processes, as well as to obtain mass spectrometric data [59-62]. Because of the pulsed nature of most MPI sources TOF analyzers are preferred, but in combination with continuous wave lasers quadrupole analyzers have been utilized [63]. MPI is performed on species already in the gas phase. The analyte delivery system depends on the application and can be, for example, a GC interface, thermal evaporation from a surface, secondary neutrals from a particle impact event (see Section 2.1.18), or molecular beams that are introduced through a spray interface. There is a multitude of different source geometries. 

The most exciting application of bond order indices concerns the description of chemical reactions involving the simultaneous change of several bonds. An example is the unimolecular decomposition of ethanol, which can happen at high temperature or IR multiphoton excitation of the molecule. Out of the possible dissociation channels, the lowest barrier characterizes the concerted water loss of the molecule, yielding ethene and H20 [30]. 

Nanosecond Absorption Spectroscopy Absorption apparatus, 226, 131 apparatus, 226, 152 detectors, 226, 126 detector systems, 226, 125 excitation source, 226, 121 global analysis, 226, 146, 155 heme proteins, 226, 142 kinetic applications, 226, 134 monochromators/spectrographs, 226, 125 multiphoton effects, 226, 141 nanosecond time-resolved recombination, 226, 141 overview, 226, 119, 147 probe source, 226, 124 quantum yields, 226, 139 rhodopsin, 226, 158 sample holders, 226, 133 singular value decomposition, 226, 146, 155 spectral dynamics, 226, 136 time delay generators, 226, 130. 

Mertz, J. 2004. Nonlinear microscopy New techniques and applications. Review of overview of authors work in multiphoton microscopy. Curr Opin. Neumbiol. 14 610-16. 

In practice, for application to ambient air, efficient photoionization requires the use of pulsed lasers and multiphoton absorption methods. The terms multiphoton ionization, or MPI, and resonance-enhanced multiphoton ionization, or REMPI, are used to describe these processes. 

---