MSD

When processed and used according to manufacturer s recommendations, acetal resins present no extraordinary health risks. Before the use of any plastic material, including acetal, the Material Safety Data Sheet (MSDS) appHcable to the grade in question should be consulted. 

Material Safety Data Sheets (MSDS) issued by suppHers of acetone ate requited to be revised within 90 days to include new permissible exposure limits (PEL). Current OSHA PEL (54) and ACGIH threshold limit values (TLV) (55) ate the same, 750 ppm TWA and 1000 ppm STEL. Eot comparison, the ACGIH TWA values for the common mbbing alcohols are ethyl, 1000, and isopropyl, 400 ppm. A report on human experience (56) concluded that exposure to 1000 ppm for an 8-h day produced no effects other than slight, transient irritation of the eyes, nose, and throat. 

When dispersed as a dust, adipic acid is subject to normal dust explosion hazards. See Table 3 for ignition properties of such dust—air mixtures. The material is an irritant, especially upon contact with the mucous membranes. Thus protective goggles or face shields should be worn when handling the material. Prolonged contact with the skin should also be avoided. Eye wash fountains, showers, and washing faciUties should be provided in work areas. However, MSDS Sheet400 (5) reports that no acute or chronic effects have been observed. 

In general, the acute toxicity of halogenated flame retardants is quite low. Tables 11—14 contain acute toxicity information from various manufacturers material safety data sheets (MSDS) for some of the flame retardants and intermediates Hsted in the previous tables. The latest MSDS should always be requested from the suppHer in order to be assured of having up-to-date information about the toxicity of the products as well as recommendations regarding safe handling. 

These salts are corrosive and are to be considered toxic because of the presence of Ag+ ions. The American Conference of Government Industrial Hygienists (ACGIH) (1992—1993) has adopted TWA values of 0.01 mg/m for silver metal and 0.01 mg/m for soluble silver salts. TWA for fluorides as F ions is 2.5 mg/m. The MSDS should be consulted prior to use. Skin contact and inhalation should be avoided. 

Dichlon)ben tnflmnde fOXSOL 1000), data sheet no. 343, 588, MSDS No. M29478, Occidental Chemical Co., Niagara Falls, N.Y., Jan. 16, 1992. 

Publication MSDS No. 100000043jPjESA., Eastman Chemical Co., Kingsport, Term., 1992. 

Human and environmental welfare for lubricants and their use is addressed in Material Safety Data Sheets (MSDS). These MSDS address toxicology and health concerns based on the components in the lubricant as well as indicating the proper response in case of a spik. Environmental ha2ards of the lubricant are covered on European and Japanese MSDS as shown in Table 5. 

Table 5. MSDS Environmental Hazard Risk Phrases ...

Ha2ardous Communi-cation Standard Compliance Manual Database Health and Safety Science Abstracts ISTP B Search MSDS/ETSS... 

OHS MSDS Summary Sheet Oil and Ha2ardous Materials Technical Assistance Data System (OHM-TADS) Radioactivity Environ-mental Monitoring... 

For an excellent, comprehensive review of the chemistry, environmental, and anthropogenic release, environmental fate, and environmental and human health effects of lead, see Air Quality Criteria for Eead, Vol. I—IV, EPA-600/8-83/028a-dF, U.S. Environmental Protection Agency, Washington, D.C., June 1986, -Msd Air Quality Criteria for Eead Supplement to the 1986 Addendum, EPA-600/8-89/049F, U.S. Environmental Protection Agency, Washington, D.C., Aug. 1990. 

Material Safety Data Sheets (MSDS) and the organic peroxides producers recommendations should be followed carefljlly for handling and storage of organic peroxide compositions. 

MSDS Reference for Crop Protection Chemicals, 1st ed. Chemical and Pharmaceutical Press, John Wiley Sons, Inc., New York, 1989. Provides MSDS for crop protection chemicals found in CPCR, with updates every two months. 

The hazards associated with handling pigments is contained ia the MSDS mandated by an OSHA Hazards Communication Standard (28) which also requires labeling and employee information and training. 

Table 2 Hsts some of the physical, toxicity, flammabiUty, and reactivity properties of common chemicals (10,13,42,45—51). Also given are some of the quantities specified for reporting spills and for compliance with legislated requirements. The OSHA regulations require that material safety data sheets (MSDS) be developed for all process materials, so that the ha2ard data can be communicated to employees (52). Characteristics of toxicity, flammabiUty, chemical iastabiUty, reactivity and reaction energy, operatiag coaditioas, and corrosive properties of constmction materials must all be considered ia analy2iag ha2ard poteatials of chemicals and chemical operations.

Sihca and aluminosihcate fibers that have been exposed to temperatures above 1100°C undergo partial conversion to mullite and cristobaUte (1). Cristobahte is a form of crystalline siUca that can cause siUcosis, a form of pneumoconiosis. lARC has deterrnined that cristobaUte should be classified as 2A, a probable carcinogen. The amount of cristobahte formed, the size of the crystals, and the nature of the vitreous matrix in which they are embedded are time- and temperature-dependent. Under normal use conditions, refractory ceramic fibers are exposed to a temperature gradient, thus only the hottest surfaces of the material may contain appreciable cristobahte. Manufacturers Material Safety Data Sheets (MSDS) should be consulted prior to handling RCF materials. 

MSDS summarizes all of the important health, safety, and environmental information about a substance. A version of this standard also appHes to laboratories, including research and development faciUties, and requires the development of a laboratory hygiene plan. 

Fig. 9. Parametric simulation using the MSD model of water flux vs feed concentration as a function of organic sorption coefficient, where for A,...

The MSDS (46) for thiophosgene describes it as highly toxic, corrosive lachrymator and moisture sensitive compound. It may be fatal if inhaled, swallowed, or absorbed through the skin. When using this material one should wear the appropriate NIOSH/OSHA-approved respirator, chemical-resistant gloves, safety goggles, and other protective clothing. It should be used only in a chemical fume hood. 

Thiophosgene, MSDS, No. T9136, Aldrich Chemical Co., Milwaukee, Wis., May 11, 1995. 

---