Mixed packaging

The collection of mixed packaging material from the public and consumers involves either curbside collection or collection from drop-off centres. Curbside collection involves consumers placing designated plastics in special containers outside their homes for pick-up by a public or private hauler, and drop-off centres refer to consumers bringing their plastics to a centrally located collection point. In contrast to the collection at a production site, these costs are estimated to reach 0.50 /kg. ... 

When hazardous materials having different hazard classes are packed within the same packaging or within the same outside container or overpack (so-called mixed packaging ), the packaging, outside container or overpack must be labeled as required for each class of hazardous material contained therein. When two or more packages containing compatible hazardous materials are placed within the same container or overpack (so-called consolidated packaging ), the outside container or overpack must also be labeled as required for each class of hazardous material contained therein. 

The condensation leaves epoxy end groups that are then reacted in a separate step with nucleophilic compounds (alcohols, acids, or amines). Eor use as an adhesive, the epoxy resin and the curing resin (usually an aliphatic polyamine) are packaged separately and mixed together immediately before... 

The FD C certified colors are all water-soluble dyes, but can be transformed into insoluble pigments known as lakes by precipitating the dyes with alurninum, calcium, or magnesium salts on a substrate of aluminum hydroxide. The lakes are useful in appHcations that require color whereas in dry form, such as cake mixes, or where water may be present and bleeding is a problem, such as food packaging. FD C Red Lake No. 3 was deHsted in Febmary... 

More than half of flexible packaging is used for food. Within foods, candy, bakery products, and snack-type foods, such as potato and com chips, use well over half of flexible packaging. Cheese, processed meat, shrink wraps, condiments, dry-drink mixes, fresh meats, and fresh produce represent smaller appHcations. 

Typically, soHd stabilizers utilize natural saturated fatty acid ligands with chain lengths of Cg—C g. Ziac stearate [557-05-1/, ziac neodecanoate [27253-29-8] calcium stearate [1592-23-0] barium stearate [6865-35-6] and cadmium laurate [2605-44-9] are some examples. To complete the package, the soHd products also contain other soHd additives such as polyols, antioxidants, and lubricants. Liquid stabilizers can make use of metal soaps of oleic acid, tall oil acids, 2-ethyl-hexanoic acid, octylphenol, and nonylphenol. Barium bis(nonylphenate) [41157-58-8] ziac 2-ethyIhexanoate [136-53-8], cadmium 2-ethyIhexanoate [2420-98-6], and overbased barium tallate [68855-79-8] are normally used ia the Hquid formulations along with solubilizers such as plasticizers, phosphites, and/or epoxidized oils. The majority of the Hquid barium—cadmium formulations rely on barium nonylphenate as the source of that metal. There are even some mixed metal stabilizers suppHed as pastes. The U.S. FDA approved calcium—zinc stabilizers are good examples because they contain a mixture of calcium stearate and ziac stearate suspended ia epoxidized soya oil. Table 4 shows examples of typical mixed metal stabilizers. 

Cost bilizers. The variety of known costabiHzers for the mixed metal stabilizers is a very long listing. There are, however, a relatively small number of commercially used costabiHzers. Some of these additives can also be added by the PVC compounder or processor ia addition to the stabilizer package to further enhance the desired performance characteristics. The epoxy compounds and phenoHc antioxidants are among the most commonly used costabiHzers with the mixed metal stabilizers. 

Phosphites. Tertiary phosphites are also commonly used and are particularly effective ia most mixed metal stabilizers at a use level of 0.25—1.0 phr. They can take part ia a number of different reactions duting PVC processing they can react with HCl, displace activated chlorine atoms on the polymer, provide antioxidant functionaHty, and coordinate with the metals to alter the Lewis acidity of the chloride salts. Typical examples of phosphites are triphenyl phosphite [101 -02-0], diphenyl decyl phosphite [3287-06-7], tridecyl phosphite [2929-86-4], and polyphosphites made by reaction of PCl with polyols and capping alcohols. The phosphites are often included in commercial stabilizer packages. 

Economics. As with the alkyl tin stabilizers, the market pricing of the mixed metal stabilizers tend to be directed by the particular appHcation. The calcium—zinc and barium—cadmium packages are typically used at 2.0—4.0 parts per hundred of PVC resin (phr) in the formulation. These completely formulated products are sold for 2.50— 4.40/kg for the Hquid products and 3.20— 6.50/kg for the soHds and pastes. The higher efficiency products aimed at rigid appHcations tend toward the higher end of the cost range. 

---