Mitsubishi Heavy Industries

Mitsubishi Heavy Industries, Ltd., Tonen Corp., and Sanyo Electric Co. are participating in the program. This effort is in its early stages and is concentrating on cell components and small cell development. 

Figure 2-1. Steam turbine using impulse blading. (Source Mitsubishi Heavy Industries.)...

It is reported that Hitachi Zosen Corp. of Japan has begun trial operation of a commercial-scale device for the conversion of waste plastic to oil. Details of the device are provided. It is also reported that Mitsubishi Heavy Industries Ltd. (MHI) has installed a pilot plant for producing gas fuel from waste plastics. The MHI system is described. 

HITACHI ZOSEN CORE MITSUBISHI HEAVY INDUSTRIES LTD. KANSAI ELECTRIC POWER... 

Par-Isom [Paraffin isomerization] A process for isomerizing light naphtha in order to improve the octane number. The proprietary catalyst was developed by Cosmo Oil Company and Mitsubishi Heavy Industries, and the process was developed by UOP. The oxide catalyst is claimed to be more efficient than zeolite catalysts currently used for this process. 

Mitsubishi Heavy Industries (MHI) Coal (high ash m.p. Australian) LHV IGCC units developed include 27, 125, 250 MW 200, 1500 Amb. Oxygen 350-450... 

Y. Yoshida et al., "Development of Solid Oxide Fuel Cell," paper provided by Mitsubishi Heavy Industries Ltd. 

Department of Materials, Teikyo University of Science Technology Uenohara-machi, Yamanashi 409-0193, Japan a Nagasaki R D Center, Mitsubishi Heavy Industries, Ltd. 

Japanese industries including Toshiba, Mitsubishi Heavy Industries, Fuji Electric, Toyo Tanso, Nuclear Fuel Industries, etc., are developing the HTGR jointly with JAEA. The industrial and public information exchange is supported by the Japan Atomic Industrial Forum (JAIF), the Research Association of High-temperature Gas-cooled Reactor Plant (RAHP), etc. 

Ross et al. [10,88] conducted an extensive study on the conversion of several model compounds (e.g., parachlorophenol, dichlorobenzene, hexa-chlorobenzene, and tetrachlorobiphenyl) to simulate the waste streams containing PCBs, under supercritical conditions at 400°C and 3700 psi with sodium carbonate added as a promoter. In their study, no formation of dibenzofurans or dibenzo-p-dioxins was noted during the decomposition of the starting material, even at conversions as low as 50%. These results were confirmed by Mitsubishi Heavy Industries (MHI) in their laboratory-scale testing. 

Figure 10 A schematic of an SCWO processing plant for PCB disposal. (Courtesy of Mitsubishi Heavy Industries, Japan.)...

Mitsubishi Heavy Industries. PCB hydrothermal decomposition. Marketing Brochure, 2001. 

Izumi, X, Mitsubishi VOC Recovery Process. Mitsubishi Heavy Industries, Ltd., 1996. Cited from (Tanev and Pinnavaia, 1995). 

MHI [Mitsubishi Heavy Industries] A coal gasification process designed for coals whose ash has a high melting point. Piloted at Nakoso, Japan. 

Early developments were made by Mitsui Shipbuilding and Engineering, Ruhrchemie (molten salts), Kawasaki Heavy Industries and Mitsubishi Heavy Industries [14]. Mitsui processed low-M.W. PE and atactic PP to form ... 

Mitsubishi Heavy Industries pioneered a two-step pyrolysis of mixed plastics. A primary vessel is used for decomposing PVC at 300°C. Then, HCl is scrubbed out from the effluent. Molten material is fed into a second vessel operating at 400-500°C. The same concept was much later applied by BASF at Ludwigshafen, and extended to achieve a selective pyrolysis, making use of differences in thermal stability of the different resins. 

SRI International Mitsubishi Heavy Industries Japan PCBs and chlorinated wastes 2005 (Built)... 

Mitsubishi Heavy Industries, Ltd., 5-717-1 Fukahori-mach, Nagasaki 851-0392, Japan E-mail VYB03313 nifiy.nejp... 

Nagasaki Research Development Center, Mitsubishi Heavy Industries, Ltd5-7l7-l, Fukahori-machi, Nagasaki 851-03, Japan... 

S. Hirayama , R. Ueda", Y. Ogushi A. Hirano% Y. Samejima K. Hon-Nami°, and S. Kunito " Adv. Technol. Res. Center, Mitsubishi Heavy Industries Ltd., Kanazawa-ku, Yokohama 236, Japan... 

Hiroshima Research Institute, Mitsubishi Heavy Industries, Ltd. 

Organisation CRIEPI (Central Research Institute of Electric Power Industry), Hitachi (Hitachi Ltd), Toshiba (Toshiba Corporation), FES (Fuji Electric Systems Co.), INC (Japan Nuclear Cycle Development Institute), JAERI (Japan Atomic Energy Research Institute), MFH (Mitsubishi Heavy Industries, Ltd), ARTEC (Advanced Reactor Technology Co.), TGC (Tokyo Gas Co.), NSA (Nuclear Systems Association), Tokyo Tech (Tokyo Institute of Technology). 

MITSUBISHI HEAVY INDUSTRIES, LTD. 3-3-1 Minato Mirai, Nishi-ku Yokohama-shi, Kanagawa-ken... 

Mitsubishi Heavy Industries Ltd., a licensee of the SRI International AHO process, has built the most recent full-scale SCWO plant. The plant was built for the Japan Environmental Safety Corp, (a company owned by the Japanese government) to destroy that nation s large stockpile of polychlorinated biphenyl (PCB) waste. It consists of three reactor systems, each having a capacity of 2 tons PCB/day and 100 tons water/day, and a treatment requirement of <3 ppb PCB in the liquid effluent (representing six 9s destruction efficiency). The plant began operation in 2005. 

---